for Citroën 2CV AK-AZU
2528 Articles | Page 3 of 51
2CV, Window handle inside (catcher). Fixture for the closed flap window in the front door
Reproduction, high quality. Color grey. Per piece, on the left + on the right fitting.
2CV, Window handle inside (catcher). Fixture for the closed flap window in the front door. Suitable
for Citoren 2CV. Good reproduction, per piece, on the left + on the right fitting.
2CV, Window handle inside, from polished high-grade steel (catcher). Fixture for the closed flap
window in the front door. Reproduction, per piece, on the left + on the right fitting.
2CV, special window holder (1 pair, for left + right). Suitable for Citroen 2CV. These window
holders are a real alternative. They are mounted using a screw sleeve and screw. So it doesn't matter if the existing mounting hole in the door is worn or bent. This special version is simply screwed on. The screw sleeve supplied expands when fastened and wedges itself securely in the door. Simple and effective!
PDF FILE 2CV old, handle pan for the door opener in front on the left. Reproduction, color grey. Suitable
for Citroen 2CV with high door linings. Or: AZ841-100
2CV old, handle pan for the door opener in front on the right. Reproduction, color grey. Suitable
for Citroen 2CV with high door linings. Or: AZ841-100A
Handle pan, door opener on the right, color black. The handle pans are installed in Citroen 2CV
with high door linings.
2CV, Handle pan door opener screw set (for both sides). Suitable for Citroen 2CV Special (Sheet
metal driving screw, no fine thread), with high door linings.
2CV, bracket (welded) for the gear lever. Suitable for Citroën 2CV, AK, AZU. This bracket is
welded from above the storage compartment (dashboard).
2CV, bracket for the choke cable (square mount) in the interior (made of sheet metal, welded in to
the right of the speedometer). Suitable for Citroen 2CV, AK,
2CV, bracket for the headlight height adjustment rod in the interior (made of sheet metal, welded
to the left of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, bracket for warm air adjustment lever top - bottom in the interior (made of sheet metal
welded to the right of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, Mounting on the left for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, Mounting on the right for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, left valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, left valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
2CV, Valence panel on the left for Citroen 2CV. (attached sheet metal between fender and bonnet)
Good reproduction from the European Union.
2CV, right valance panel (with ribs - known as "Louvers-Louvres") for Citroen 2CV (sheet metal
screwed between the fender and bonnet). Made from sheet metal! The valence panel can be replaced without modification.
2CV, right valence panel (original) for Citroen 2CV. (screwed sheet metal between fender and
bonnet). Original spare part, made in France
Valence panel on the right for Citroen 2CV. (attached sheet metal between fenders and bonnet). Good
reproduction from the European Union.
2CV, Valence panel, rubber seal between Valence panel and a-post (front wall). Suitable for Citroen
2CV starting from year of construction 1961. Made in France.
2CV, Valence panel, fixing clip from high-grade steel, for the securement of the Valence panel at
the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A. Made in Germany.
2CV, Valence panel, fixing clip made of galvanized metal, for the securement of the Valence panel
at the front wall. Suitable for Citroen 2CV. Or.Nr. AZ 85280A
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6 RHD (right hand drive). Made in Europe.
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6. Made in Europe.
Heater hose connection connecting piece (small) on the right (welds at the front wall). Suitable
for Citroen 2CV6. Made in Europe.
2CV, Luggage compartment lid, emblem (signature) "2CV", from synthetic chromium-plates. Length
about 55mm, height of ca.21mm.
2CV, Luggage compartment lid, emblem (signature) "2CV4", from synthetic chromium-plates. Length
about 85mm, height of ca.25mm
2CV, Luggage compartment hood. Emblem "2CV" swung, from 3mm high-grade steel. Made in Germany by
Franzose. The signature 16836 consists of: 1x "2" + 1x "CV". The emblems are fastened with 4x M3 nuts (our article number 20166).
2CV, Luggage compartment hood. Emblem "CITROEN" swung, from 3mm high-grade steel. Made in Germany
by Franzose. The signature is about 180mm long, and 65mm highly. The emblems are fastened with 2x M3 nuts (our article number 20166).
2CV, Luggage compartment hood. Emblem CITROEN made of metal. Reproduction like original, 35x160mm
Also fitting for other Citroen!
VIDEO 
2CV, fender in front on the left. Mud flap (noise insulation) for the interior fender (Cover
transition fender to pedal base, grommet of the tie rod + exhaust pipe) . Suitable for Citroen 2CV6, of year of construction 1988 to 1990.
2CV, fender in front on the left. Mud flap (noise insulation) for the interior fender (Cover
transition fender to pedal base, grommet of the tie rod). Suitable for Citroen 2CV6, of year of construction 1988 to 1990.
2CV, Fender in front, fixing clip for the starting crank. By the Citroen 2CV up to 1970, was
fastened the starting crank inside to the fender.
2528 Articles | Page 3 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
