Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connector
M9). Suitable for Citroen 2CV + Citroen HY.
for Citroën 2CV AK-AZU
2525 Articles | Page 18 of 51
Brake line set M9 (complete set). Brake system DOT. Suitable for Citroën 2CV, built between
02/1970 and 06/1970. Mehari built between 05/1969 and 12/1971. Dyane built between 05/1969 and 06/1970. Hose diameter: 4.5 mm. Screw connection: M9.
Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear
brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.
Brake light switch old version. Suitable for Citroen 2CV (6 volt), AMI6 + Citroen ID19, up to year
of construction 08/1961 (DM576-02, does not fit Citroen DS). The brake light switch is mounted in the engine compartment on the firewall. Reproduction. Or. No. AZ57602 (2CV). However, with a little skill, the brake light switch can also be converted to fit the DS19 with Or. No. DS576-02A. The brake light switch for DS19 is no longer available.
Stop light switch at the brake pedal. Connection flat plug. Connector: M12x1. Suitable for Citroen
2CV6, DS, CX, BX, HY, GS
Brake caliper seal (for sealing the two brake caliper halves) for our brake caliper 13013
Dimensions: 10 x 6.2 x 1.9 mm, suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for our reproduction brake calipers 13013.
Brake disks "sport" front (2 pieces). Suitable for Citroen 2CV, from year of construction 1981 up
to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
Brake hose mounting plate, rear left. Fits Citroen 2CV, up to year of manufacture 07/1964. The
brake hose is attached to the bracket with the banjo bolt (hence the 10mm hole in the bracket). Reproduction. Or. No.: A453-67
Brake hose mounting plate, rear left. Suitable for Citroen 2CV, from year of manufacture 07/1964 to
01/1972. The brake hose with its M14 thread is pushed through the holder and locked with a thin M14 nut (hence the 16mm hole)! Made of stainless steel! Or. No. AM453-67. Made in Germany.
Brake hose mounting plate, rear right. Suitable for Citroen 2CV, from year of manufacture 07/1964
to 01/1972. The brake hose with its M14 thread is pushed through the holder and locked with a thin M14 nut (hence the 16mm hole)! Made of stainless steel! Or. No. AM453-67A. Made in Germany.
Brake hose mounting plate, rear right. Fits Citroen 2CV, up to year of manufacture 07/1964. The
brake hose is attached to the bracket with the banjo bolt (hence the 10mm hole in the bracket). Reproduction. Or. No.: A453-67A
Brake hose rear, suitable for Citroen 2CV + AMI6, to year of construction 1966. Length: 310mm. One
side male thread M10x1. The other side has a female thread M10x1.
PDF FILE 
Brake hose in front, suitable for Citroen 2CV, starting from year of construction 1966. Length
280mm. One side male thread M12x1. One side female thread M10x1. Or.Nr.: AM453-29A. Made in Spain.
Brake hose in front, suitable for Citroen 2CV, to year of construction 07/1964. Length: 285mm. One
side male thread M12x1. The other side has female thread M10x1. Or.Nr.: AM453-29 AV. Made in Spain.
Brake hose in front, suitable for Citroen AK, AKS, AZU (van). Length: 302mm. 1 x male thread M12x1
1x male thread M14 x 1.5 with additional female thread M9x1,25.
Brake hose in front, suitable for Citroen AMI6. Length: 335mm. One side male thread M14x1,5 with
female thread M9x1,25. The other side has a male thread M12x1. Made in Spain.
Rear brake drum, new part. 180mm diameter, for the large wheel bearing. Suitable for Citroen AZU
AK, ACDY, AMI. The brake drum is supplied without wheel bearing.
Drum in front. Suitable for Citroen AK400, 350, AMI6, Dyane. 4 hole securement. 220mm diameter. The
drum is outside ripping. Or.No.: AM4516
Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for hydraulic brake systems
For lubricating cylinder liners and pistons. Extends the service life of brake cylinders. Protects against corrosion. Compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids. Keeps sleeves soft. Supports the installation of O-rings, lip seals, sleeves and other sealing elements made of rubber-elastic materials. Apply brake cylinder paste thinly and evenly on the surfaces to be lubricated. Attention: If you are installing a new wheel brake cylinder in your classic car, please coat the pistons and sleeves with this paste before installation. This will increase the longevity of the new brake parts on cars that are driven occasionally.
Chassis AK400/350, reproduction, looks like original. Suitable for Citroen AK400 + AK350 (2CV van)
The chassis does not have TÜV (homologation) papers. Made in Europe. The chassis is visually and technically the same as the original chassis! The chassis are powder-coated!
Choke cable old version, without light. Suitable for Citroen 2CV, Dyane, AMI6+8 until 1976, length
to 1500mm (can be shortened)
Choke cable with oval knob. Suitable for Citroen 11CV/15CV, starting from year of construction
07/1952. Length: 810mm. This choke cable can be installed also universal. Or. No. 723171
Choke cable, final version for Citroen 2CV + Dyane. For the square mounting. The choke cable is
illuminated! Or. No. 95597858
VIDEO Autosol chrome polish. 75 ml tube. (Premium chrome shine care). Autosol chrome polish has been
around for ages and has often been copied! Made in Germany.
Citroen emblem (Chevron) on the dashboard. Suitable for Citroen 11CV + 15CV, up to year of
construction 02/1952. Or. No. 802594. Dimension: 38 x 40mm. The emblem can also be used universal.
Emblem Citroen (Chevron) plastic, chromium-plates. Height of brackets about 55mm. Suitable
retaining tie-clip = 37264. The tie-clip is required 4x!
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Pressure spring suitable for the idle air control adjusting screw, for Solex carburetor. For the
following carburetors: 26CBI, 28CBI, 30CBI (AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
Cockpit screen on the right beside the speedometer, suitable for Citroen 2CV. The screen becomes
below Installed of the windshield wiper switch. For angular switch. Made in Germany.
Damping/insulation cover for the front wall in the interior (7 pieces). Complete for top and
bottom, incl. dashboard cover. Suitable for Citroen 2CV with large speedometer (oval) + small speedometer (2CV Special). Used from 1971 to 1990. High-quality reproduction from Europe. Material: High-quality, solid vinyls and original insulation (compressed textile mix).
Damping cover for front wall in the interior (8-piece), for vehicles with right-hand steering wheel
(RHD). Complete for top and bottom, incl. dashboard cover. Suitable for Citroen 2CV with large speedometer(Oval) + small speedometer (2CVSpecial). Installed from approx. 1971 to 1990. 8 parts. Material: Special insulating foam covered with imitation leather.
2525 Articles | Page 18 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
