for Citroën 2CV AK-AZU

Tie rod locking plate, suitable for Citroen 2CV. For tie rod lever with stepped attachment

Installed from year of construction 1963. Or. No.: AM41389. Like the original plates, our locking plates are slightly bent up at the ends. This makes them easier to fold over (securing the screws)

• Suitable for this article
• 
  Tie rod lever on the left, suitable for Citroen 2CV, starting from year of
  72,29 €
• 
  Tie rod lever on the right, suitable for Citroen 2CV, starting from year of
  72,29 €

Split pin small, for the tie rod end nut + radius arm bearing. Suitable for Citroen 2CV

Measurement: 2 x 20mm

Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for Citroen 2CV. Note: this

tool do not fit for tie rod end with strengthened nuts.

• Suitable for this article
• 
  Tie rod end locking nut. Suitable for Citroen 2CV. Reproduction
  2,59 €
• 
  Tie rod end repair set on the left. Inclusive bearing pan, pressure spring
  64,36 €
• 
  Tie rod end repair set on the right. Inclusive bearing pan, pressure spring
  64,36 €
• 
  Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete
  12,79 €

Tie rod end on the left (only the case, without spring and bearing pans). Suitable for Citroen 2CV

Made one in Germany. Or.Nr.: A44398B. Thread: M14x1,25 left-hand thread

• Suitable for this article
• 
  Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete
  12,79 €

Tie rod end (only the case, without spring and bearing pans). Suitable for Citroen AK400. On the

left + on the right fitting.

Tie rod end on the right (only the case, without spring and bearing pans). Suitable for Citroen

2CV. Made one in Germany. Or.Nr.: A44398C. Thread: M14x1,25 left-hand thread

• Suitable for this article
• 
  Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete
  12,79 €

Tie rod end repair set on the left. Inclusive bearing pan, pressure spring, locking nut, collar

safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.

• Suitable for this article
• 
  Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for
  16,76 €

Tie rod end repair set on the right. Inclusive bearing pan, pressure spring, locking nut, collar

safety sheet. Suitable for Citroen 2CV. Thread: M14x1,25 left-hand thread.

• Suitable for this article
• 
  Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for
  16,76 €

Tie rod end splitter (max. 23 mm fitment), workshop quality.

Tie rod end locking nut. Suitable for Citroen 2CV. The nut is stronger and is easier to adjust.

Tie rod end locking nut. Suitable for Citroen 2CV. The nut is additionally equipped with a

lubrication nipple. A real improvement!

• Suitable for this article
• 
  Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for
  16,76 €

Tie rod end locking nut. Suitable for Citroen 2CV. Reproduction

• Suitable for this article
• 
  Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for
  16,76 €

Tie rod end, 2 x seat bowl + 1 x pressure spring + 1 x crown nut. Complete repair set, in order to

repair the tie rod end inside. High quality. Suitable for all Citroen 2CV, AK, Dyane, AMI.

• Suitable for this article
• 
  Tie rod locking plate, suitable for Citroen 2CV. For tie rod lever with stepped
  1,87 €
• 
  Tie rod end wrench (630-16/2), for the nut in the tie rod end. Suitable for
  16,76 €

Spring in the tie rod end. Suitable for Citroen 2CV. Per side 1x spring is required.

• Suitable for this article

Tie rod end collar "Made in European Union", suitable for Citroen 2CV, Mehari, Dyane, AMI. This

collar is produced in Europe for "Der Franzose". The collar is very flexible and can be mounted over the complete tie rod end, without it tears. Better than original!

Tie rod end collar, suitable for Citroen 2CV, Dyane, AK, Ami. Good reproduction. Or.Nr.: A44313B

Rod for headlight vertical adjustment. Suitable for Citroen 2CV6 + 2CV4

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal

suitable for Citroen, Peugeot, Renault.

Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY

11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Plug protection against humidity, made of rubber to wrap around the plug connections, suitable for

2CV, only on the bracket assembly for the headlamps.

Stud bolt short, for 2CV6, engine block to the cylinder head. For engines with 602ccm (598ccm)

Length: 210 mm.

Stud bolt long for 2CV6, engine block to the cylinder head. For engines with 602ccm (598ccm)

Length: 240mm

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

Stud bolt M8 x 35. For the securement of the carburetor on the intake manifold. Suitable for

Citroen 2CV6 + 2CV4. (round + oval carburetor). Or. No. 26 161 509

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

stone guard MOTIP, colour grey for spray gun, 1000ml

Stop sleeve for the clutch cable (2CV to year of construction 1967, with diagonal clutch release

fork lever) and for the hand brake cables drum brake. Or. No. A454-76.

Shock absorber short, suitable for Citroen AK in front + rear, AMI 6 + 8 for in front and rear

ACDY only in front! (per piece). 14mm securement eye. Note: There are also Ami 6 vehicles, which are equipped shock absorbers with 12mm shock absorber in front, and rear 14mm. Then please, select for in front shock absorbers the number 12319 . Manufacturer "Record France". Length when pushed together: 335 mm. Length when pulled apart: 495 mm.

Shock absorber pin - disk heavily, suitable for Citroen AK, AMI, ACADIANE (14mm).

Shock absorber pin at the suspension pot, suitable for Citroen AK, ACDY, AMI. 14mm diameter

Reproduction.

Cam follower 2CV6, measurement: 24x42,5mm. Or.Nr.AZ1241. Made in Europe. High quality!

Valve push rod tube spring for Citroen 2CV4+6, Dyane 4/6, Mehari, AK, AMI6, AMI8.. Or. No.: 75516419

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Valve push rod tube for 2CV4 (425ccm engine). Length totally: 165mm, diameter 16mm, fit (set off)

at the cylinder head: 15mm.

Valve push rod tube for 2CV4 (435ccm engine). Length totally: 173mm, fit at the cylinder head

16mm. Or.Nr.: AZ22499

Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push

rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.

• Suitable for this article
• 
  Valve push rod tube seal, for Citroen 2CV6 starting from year of construction
  1,67 €

Valve push rod tube for 2CV6 (602ccm engine), first version. Length: approx. 192mm. The valve push

h rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction

• Suitable for this article
• 
  Valve push rod tube seal, for Citroen 2CV6 starting from year of construction
  1,67 €

Follower tubing seal - sheet metal plates, for Citroen 2CV to year of construction 1972. Suitable

for the follower tubing seal with wide connecting post. Per piece!

Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year of construction

10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!

• Suitable for this article
• 
  Valve push rod tube seal, for Citroen 2CV6 starting from year of construction
  1,67 €
• 
  Valve push rod tube spring for Citroen 2CV4+6, Dyane 4/6, Mehari, AK, AMI6
  2,88 €
• 
  Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are
  11,81 €

Valve push rod tube seal for 2CV (old version). Single seal, without bar in the center. You need 4

pieces per car. Manufacturer: Original Glaser, no reproduction.

Valve push rod tube seal for Citroen 2CV (first version - from the fifties). Or.Nr.: AZ22495

Valve push rod tube seal for Citroen 2CV4 + 2CV6, of year of construction 1970 to 1978. Per piece.

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Push rod seal for Citroën 2CV6, from model year 07/1978 onwards. The seals are made from an

improved material, making them significantly more durable.

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Valve push rod tube seal, for Citroen 2CV6 starting from year of construction 07/1978. Per piece

Manufacturer original "GLASER".

• Suitable for this article
• 
  Follower tubing seal - sheet metal plates, for Citroen 2CV6 starting from year
  7,89 €

Push rod for Citroen 2CV4 + AZU, to year of construction 7/1972. 273,15mm lengthens.

Push rod for Citroen 2CV6 engines (602cc). Connection of the camshaft cam follower to the toggle

lever. Length: 286mm.