Latching pin, which is inserted from above into the medium seat slide. Suitable for Citroen 2CV. It
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
for Citroën 2CV AK-AZU
2528 Articles | Page 49 of 51
Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement
10x14x27,5mm. Very good after production from the European Union.
Motor-gearbox screw connection: Short stud bolts (these are the lower stud bolts) between the motor
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
Motor-gearbox screw connection: long stud bolts (these are the upper stud bolts, as they also hold
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the left. Suitable for
Citroen 2CV. Made in Germany.
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the right. Suitable for
Citroen 2CV. Made in Germany.
Front axle cover sheet. (Cover at the steering gear, below the tie rod securement). Suitable for
Citroen 2CV. Or. No.: A44278A
Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable
for Citroen 2CV. Or.Nr.A44295
Front axle pipe - steering gear in the exchange. Suitable for Citroen 2CV4 + 2CV6. Top outdated
all bearings and pinions are accurately bedded in and measured. The steering worm and the gear rack are re-tooled with grease nipple. To lubricate thus at any time from the outside. 250 euros Old part deposit.
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
White wall rings, 4 fittings. Suitable for Citroen 2CV. Note: The white wall rings can be mounted
only in combination with our rims chrome rings 16815!
Service manual volume 2, out + installation of parts. For Citroen 2CV4 + 2CV6. In addition, the
book is component of service manual 18200. Language German.
Tool 1677-T, for the nuts (6x9mm) the rocker arm and at the gearbox (Citroen 2CV). Clutch housing
(6x9mm) Citroen DS. Attention: The screws are extremely tight. Therefore, first hit the screw head with a hammer (setting impact) to loosen the screw in the thread!
Winter tire 135R15MS. Manufacturer Michelin. Suitable for Citroen 2CV. Also very well as
all-terrain tires for Citroen Mehari.
Winter tire mounts on a new rim, 135/15. Manufacturer Michelin. We use only our own
series-identical rims and no reproduction rims! Suitable for Citroen 2CV.
Wiper axle for Citroen 2CV4 + 2CV6. New part. Complete repair set, inclusive connector nut, rubber
seal etc., for 1 axle!! Improved version! Made one in European Union. Connector nut + disk are not chromium-plated, they are only silver!
Wiper axle 2CV4+6, without mounting material. (Nuts, sealing ring), reproduction. Suitable related
d accessory: 14154 sealing rubber, 14247 chrome cap, 14152 nut outside, 14157 nut inside, 14155 tie-clip for wiper axle.
Wiper axle chrome ring, Citroen 2CV, HY. Is mounted over the sealing rubber of the wiper axle
Reproduction. Per piece.
Wiper blade from polished high-grade steel. Suitable for Citroen 2CV, to year of construction 1990
The wiper blade is spring-loaded. Length: 240mm. We let these wiper blades manufacture particularly for 2CV, and they have the original length of only 240mm! Per piece.
Wiper blade elastic, 2 fittings, for Citroen 2CV. Original Valeo! (V.24) Wiper blade length
25,50cm. The wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings. Stuffing contents: 2 fittings!
Wiper blade elastic, per piece, for Citroen 2CV. Original Valeo. Wiper blade length 25,5cm. The
wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings.
Chromium-plates wiper blades and wiper arms (2 fittings). Suitable for Citroen 2CV. This set
contains the wiper blades and arms from our own production.
Wiper blades elastic, from high-grade steel. (1 pair). Suitable for Citroen 2CV, which are equipped
with our wiper arms from high-grade steel (16832).
- Suitable for this article
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with angular wiper engine.
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with round wiper engine.
Wiper motor complete set, 12 Volt. Alternatively suitable for Citroen 2CV, up to year of
construction 6/1981. Power supply and wiper switch must be adapted! Consisting of: Wiper motor, bracket for the motor + wiper linkage, wiper linkage. This set is an alternative for the square windscreen wiper motor which is no longer available.
Wiper motor relay for end switch of old wiper motor. Suitable for Citroen 2CV4, 2CV6, AK. This
relay is required if you are converting from the old angular wiper motor (SEV Marshal with perforated plate) to the modern round wiper motor. Since the old wiring has no limit switch, you can realise this with this relay. Please note the circuit diagram on the relay.
2528 Articles | Page 49 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
