Citroen-2CV / AK/AZU /
2493 Articles | Page 4 of 50
2CV, front wing, hollow rivet for fixation of mud flap
Finally the mud flap can be mounted again with the original hollow rivets. Price per piece! (for a vehicle 8 rivets required).
2CV, front wing, hollow rivet head setter
This tool enables the original appearance of the hollow rivet, after mounting. For the perfectionists among you! (it can also work using a hammer, but it does not look fine!)
2CV, fender in front, mud flaps, per piece (original)
Suitable for Citroen 2CV final version until 1990. On the left + on the right suitable. Original Citroen (MCC), no reproduction
2CV, Fender in front, mud guard set (2 fittings) with logo. From rubber
the logo is raised! Very prettily.
2CV, Fender in front, stone guards (1 pair) rear, at the front fenders.
Above the mud flaps). Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.
2CV, Fender in front, stone guards (1 pair) underneath the indicators
for the front side of the fender. Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.
Radiator grill from aluminum, Design 3 bar
Suitable for Citroen 2CV starting from year of construction 1961. This radiator grill is installed from 1967 to 9/1974. It is a reproduction, with hard plastic at the center web.
2CV, Radiator grill from synthetic, color grey, with chromed verge
Suitable for Citroen 2CV. This radiator grill is installed in some Charleston models.
2CV, Radiator grill from synthetic (original), color grey, with black frame
Suitable for Citroen 2CV. Original Citroen, no reproduction!
2CV, Radiator grill from synthetic (original), color grey, with chromed frame
Suitable for Citroen 2CV. Original Citroen, no reproduction!
2CV, Radiator grill from synthetic, color grey, with grey verge
Suitable for Citroen 2CV starting from 1961. Installed one starting from 1973.
2CV, Radiator grill from synthetic, color grey, with black verge
Suitable for Citroen 2CV. This radiator grill is installed in some Charleston models.
Sheet metal driving screw with large head. Black galvanizes. Measurements: 4
8 x 9.5 mm. Suitable for radiator grill 16002.
2CV, Radiator grill screw set. Only suitable for original radiator grill
16415 + 16416). For Citroen 2CV.
2CV, Radiator grill, Chevron chromium-plates
For radiator grill out of synthetic. The Citroen angles are also from synthetic.
2CV, Radiator grill, fly-screen in the bonnet (original)
for Citroen 2CV starting from year of construction 1961.
2CV, Radiator grill, fly-screen behind the radiator grill
The fly-screen is reproduction made from high-grade steel. Made in Germany.
2CV, Radiator grill, fly-screen in the bonnet
for Citroen 2CV starting from year of construction 1961. Simple reproduction. The grid must be painted. (Rust protection)
2CV, winter protection (original) for a radiator grill from synthetic
Original Citroen, no reproduction
2CV, radiator grill, winter protection from significant vinyl
We let produce this winter protection from most significant vinyl with completely inserted wire inset. The rear side has 3 velcro fastener. Thus the winter protection fits on all metal and synthetic radiator grill`s. Citroen recommends to use starting from temperatures under 10° a winter protection. Made in the European Union.
2CV, Radiator grill, winter protection simply. Material: Vinyl
The winter protection is hooked only from the outside at the aluminum radiator grill. Suitable for Citroen 2CV, of year of construction 1963 to 1973. Note: Not suitable for radiator grill from synthetic!
Ventilation shutter seal rubber, for Citroen 2CV, all models
This rubber is a quality after production, and corresponds to the original rubber.
Ventilation shutters fly-screens, for Citroen 2CV
Produced from high-grade steel! Made in Germany by Franzose.
Ventilation shutter 2CV to 1963/64. Without attachments
Linking of the ventilation shutter is about centric! The seal and the trim are the same, than from the other 2CV. Made in Europe.
Ventilation shutter for Citroen 2CV. Reproduction
without seal rubber + aluminum strip! Made in Europe.
Ventilation shutter for Citroen 2CV. Reproduction from high-grade steel
The Ventilation shutter is supplied without seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutters rubber seal (foam rubber), self adhesive
under the Ventilation shutter, at the body. Suitable for Citroen 2CV.
Ventilation shutter completely (original), for Citroen 2CV
The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must paint before be adapted! Original Citroen, no reproduction!
Ventilation shutter completely, for Citroen 2CV
Reproduction out of sheet metal. The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutter completely, for Citroen 2CV
Reproduction from high-grade steel! The Ventilation shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutter aluminum strip, 2CV
The strip is a little more matte than the original. 12x nut M3 (20166) are required!
Ventilation shutter trim from polished high-grade steel
suitable for Citroen 2CV. Own reproduction. 12 x nut M3 are required. (20166)
2CV, ventilation flap, re-fitting grid for air distribution towards the driver
This ingenious little grid redirects the airflow towards the driver when the ventilation flap is open. The grid is fitted within couple of minutes, using the clips supplied. So: ventilation system variable according to speed! We wouldn't want to do without it at high temperatures!
PDF FILE
Ventilation shutter, pin for Ventilation shutter linking, Citroen 2CV
for all years of construction. Diameter: 5,0mm
Securing clip suitable for the Ventilation shutter, for Citroen 2CV.
Securement installing handwheel at the Ventilation shutter)
Bonnet mounting rod. Suitable for Citroen 2CV
of year of construction 3/1962 to 1990. Made of high-grade steel!
Bonnet out of sheet metal (Original)
for Citroen 2CV starting from year of construction 1974. A dispatch of the bonnet is not possible! Original Citroen, no reproduction!
Bonnet out of sheet metal
for Citroen 2CV starting from year of construction 1974. Reproduction! A dispatch of the bonnet is not possible!
Bonnet lock for retrofitting, for 2CV. After installing
the bonnet can be locked and opened with a key.
VIDEO
2CV, bonnet, insulation mat (Made in Germany), for Citroen 2CV
from model year 1961 to 1990. The bonnet insulation mat is self-adhesive. Reproduction from Germany. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historical look). Our recommendation!
2CV, bonnet, damming mat (original), for Citroen 2CV
of year of construction 1961 to 1990. The bonnet insulating mat is self adhesive. Original Citroen, no reproduction.
2CV, Bonnet, damming mat from material - felt. Not self adhesive
This bonnet insulating mat was the first version, and installed from 1963 to about 1969.
2CV, bonnet: small insulation mat (self-adhesive)
This small insulation mat was glued in front of the large insulation mat in the last 3 years of production. The mat covers the area up to the radiator grille. It was only installed in the years 1988 to 1990. Primarily in Germany and Austria. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historic look). Of course, any other Citroen 2CV can be retrofitted with this mat. "Made in Germany" (material + punching).
2CV, Bonnet, rubber buffer small, for the base of the bonnet on the fender
The rubber buffers are from the inside, in front, in the bonnet mounted.
2493 Articles | Page 4 of 50
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
