for Citroën 2CV AK-AZU
2537 Articles | Page 5 of 51
Bonnet out of sheet metal (Original), for Citroen 2CV starting from year of construction 1974. A
dispatch of the bonnet is not possible! Original Citroen, no reproduction!
Bonnet out of sheet metal, for Citroen 2CV starting from year of construction 1974. Reproduction! A
dispatch of the bonnet is not possible!
VIDEO 2CV, bonnet, insulation mat (Made in Germany), for Citroen 2CV, from model year 1961 to 1990. The
bonnet insulation mat is self-adhesive. Reproduction from Germany. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historical look). Our recommendation!
PDF FILE 
2CV, Bonnet, damming mat from material - felt. Not self adhesive. This bonnet insulating mat was
the first version, and installed from 1963 to about 1969.
2CV, bonnet: small insulation mat (self-adhesive). This small insulation mat was glued in front of
the large insulation mat in the last 3 years of production. The mat covers the area up to the radiator grille. It was only installed in the years 1988 to 1990. Primarily in Germany and Austria. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historic look). Of course, any other Citroen 2CV can be retrofitted with this mat. "Made in Germany" (material + punching).
2CV, Bonnet, rubber buffer small, for the base of the bonnet on the fender. The rubber buffers are
from the inside, in front, in the bonnet mounted.
2CV, Bonnet, retaining rubber (bearing) for the bonnet support, in front at the head light bracket
Suitable for Citroen 2CV starting from year of construction 1961. Citroen AMI6
2CV, Bonnet, retaining rubber suitable for the bonnet hinge rod, for Citroen 2CV. If the bonnet is
opened, the bonnet rod is hooked there.
Bonnet, retaining plate for the hood latching (first version). (the retaining plate is from
downside screwed on to the bonnet). Suitable for Citroen 2CV.
2CV, bonnet, retaining plate for the bonnet latching (final version to year of construction 1990)
(the retaining plate is from downside screwed on to the bonnet). Suitable for Citroen 2CV.
2CV, bonnet, catch completely. Suitable for Citroen 2CV, Installed from 1974 to 1990. The hook is
screwed onto the vehicle chassis. The hook is a South American version. Possibly the operating lever must be re-bent a little!
2CV, Bonnet, catch completely. Suitable for Citroen 2CV. Installed from 1961 to 1973. The hood
catch is screwed onto the chassis. Or.Nr. AZ86102
2CV, Bonnet, trim (aluminum) for the bonnet. Version AZAM. The trim is in the cross section easily
triangular. Length about 106cm. Wide one: 20mm. This trim fits on each 2CV starting from the year of construction 1963.
Bonnet, trim with mounting material. The trim fits on all Citroen 2CV bonnets starting from year of
construction 1961. Length about 93cm. The trim does not fit on the corrugated sheets bonnet!
2CV, bonnet hinge strip with repair sheet metal up to the Ventilation shutter. Suitable for Citroen
2CV. Good reproduction, like original. The sheet metal has the projection up to the ventilation shutter. Made in Europe.
2CV, engine bonnet hinge ledge, with repair sheet metal up to the Ventilation shutter. For Citroen
2CV. Simple reproduction. Made in Germany.
Nut in the door, for the securement of the door loop at the door, for Citroen 2CV. (All models with
high door linings and without plastic cover above).
2CV, pedal floor: Noise insulation mat on the pedal floor (as original). Self adhesive. Suitable
for Citroen 2CV with hanging pedals (until year of manufacture 1990). The insulation consists of 2 parts. First, the insulation layer is placed on the pedal floor. Then comes the heavy layer (modern bitumen, does not age, does not crack, UV-resistant, water-repellent, state-of-the-art automotive technology, but with the look of yesterday!) The heavy layer is heated slightly and then lays over the insulation. The material and manufacturing is completely "Made in Germany". The hole for the steering column must be made by yourself.
Rubber mat on the pedal base. Suitable for Citroen 2CV with hanging pedals. The rubber mat is
shifted instead of the bitumen and can be removed at any time again.
2CV old, pedal floor plate doubles (with brass bushes). Strengthened version. For all Citroen 2CV
with standing brake + clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). The pedal floor plate has like original 2 brass bushes in front, for the clutch and the brake. Made in Europe.
2CV, pedal floor plate double. Original, no replica. For all Citroen 2CV with hanging brake +
clutch pedals (used approx. 1977 to 1990). Made in France
2CV, pedal floor pan double. Strengthened version. For all Citroen 2CV with hanging brake + clutch
pedal (installed from about 1977 to 1990). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate doubles. Strenghened version. For all Citroen 2CV with standing foot
throttle and hanging brake pedal + clutch pedal. (Installed about 1970 to 1977.) The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV old, pedal floor plate doubles. Strengthened version. For all Citroen 2CV with standing brake +
clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate inside, with all flanges (Repair sheet metal). Very good reproduction, for
Citroen 2CV with hanging pedals. Made in Europe.
- Suitable for this article
Back window seal - sealing trim, synthetic grey. Suitable for Citroen 2CV. Length: 2,23 meters
This sealing trim was used also with the side windows in Citroen a AK, AZU, Dyane, HY. Made in France
Head light bracket 2CV (RHD)! Suitable for Citroen 2CV, to year of construction 1990. Caution, only
for vehicles with steering wheel on the right (RHD)
Head light bracket 2CV old, second version! For 2CV starting from year of construction 1961. (The
first models after corrugated sheet bonnet!)
Head light bracket 2CV old. First version for corrugated sheet bonnet. Suitable for Citroen 2CV, to
year of construction 1961. Original of MCC France.
Head light bracket for Citroen 2CV. It is the narrow, third version. This holder is installed in
the seventies, and is not suitable for angular headlamps! Poor quality.
Head light bracket 2CV6 (original)! Wide version. Suitable for Citroen, of year of construction
1977 to 1990 (also suitable for angular headlamps). Original, no reproduction
Head light bracket mounting foot (1 pair), for Citroen 2CV6. 1 set = 1x on the left + 1x on the
right. The sheet metals are untreated, so that they can be coated. Made in Germany.
2CV, headlamp holder, spacer sleeve in the headlamp holder for headlamp height adjustment. Suitable
for Citroen 2CV. The sleeve is 26mm long, has 10mm diameter. Re-manufactured from stainless steel!
2CV, headlight holder, spring for headlight height adjustment. Suitable for Citroen 2CV (per
piece). Or. No. AK54151
2CV, headlight carrier, threaded bolt for the headlight height adjustment. This bolt holds the rod
for the adjustment. It is the last version, installed until 1990. Or. No. A54186
2CV, box sill on the left completely, for Citroen 2CV. The box sill have the stud bolt for the
fender securement and the fine threads for the seat belt attachment. Installed one starting from 04/1970. Made in Europe.
2CV, box sill on the left completely, inclusive wing/fender thread + seat belt attachment. Starting
from year of construction 04/1970. Absolutely properly matching reproduction with all threads. Made by Franzose
2CV, box sill on the right completely, for Citroen 2CV. The box sills have the stud bolt for the
fender securement and the fine threads for the seat belt attachment. Installed one starting from 04/1970. Made in Europe.
2CV, box sill on the right completely, inclusive wing/fender thread + seat belt attachment
Starting from year of construction 04/1970. Absolutely properly matching reproduction with all threads. Made by Franzose
2CV, Seat bench cover front. Vinyl black. The sides are closed. The surface is perforated (pierced
sample). Made in France.
2537 Articles | Page 5 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
