for Citroën 2CV AK-AZU
2525 Articles | Page 45 of 51
Front bumper (tube bumper). Suitable for all Citroen 2CV PO (export-overseas, also panel vans)
Reproduction of the original tubular bumper, as it was only fitted to the export models and the Sahara. The original bonnet holder for the corrugated sheet metal bonnet must be mounted on the chassis! Mounting on a normal chassis is not possible without the bonnet bracket and side brackets on the chassis!
Bumper in front, first version. Suitable for Citroen 2CV to year of construction 06/1963. The
bumper is supplied without bumper overriders. The bumper should be painted. Made in Europe.
Bumper in front for Citroen 2CV, out polished high-grade steel. Particularly for 2CV manufactured
Inclusive 2 overrider from high-grade steel! The bumper is manufactured into complex manual work and is polished then about 6 hours!
Bumper in front, for Citroen 2CV6 + 4. Installed from year of construction 06/1963 to 07/1990. The
bumper is delivery without black adhesive strip. (16510). The bumper is beige grounding and should be painted. Made in Europe.
Bumpers rubber grey, in front, for Citroen 2CV. This rubber was mounted starting from 1963 to 1975
instead of black adhesive strips.
Bumpers rubber black, in front. For Citroen 2CV. This rubber was mounted starting from 1963 to
1975, instead of black adhesive strips.
Bumpers rubber buffers, for Citroen 2CV. This rubber is rear, mounted from above onto the front
bumpers. It is the base for the bonnet! Often this rubber is missing, and the bonnet rubs on the bumper. Or. No. A615-84
Bumpers trim in front centrically, for Citroen 2CV to year of construction 1963. (Aluminum rail
with grey rubber). Length about 460mm. The trim is required 1x per car. The suitable fixing clip has the number 16844.
Bumpers trim in front, on the left + on the right fitting., for Citroen 2CV to year of construction
1963. (Aluminum rail with grey rubber). Length about 325mm. The trim is required 2x per car. The suitable fixing clip has the number 16844.
Front bumper brackets (AZAM brackets). 1 set (2 pieces), fits all Citroën 2CV models from 1963
onwards. These brackets were fitted to the luxury 2CV models in the 1960s and 1970s!
Bumper mounting bracket in front on the left. Suitable for Citroen 2CV 4 + 6. Good reproduction
from the European Union. Electrolytically galvanized.
Bumper mounting bracket in front on the right. Suitable for Citroen 2CV + AZU, of year of
construction 1948 to 1965. Or. No. A815-91C
Bumper mounting bracket in front on the right. Suitable for Citroen 2CV 4 + 6. Good reproduction
from the European Union. Electrolytically galvanized.
Bumper overrider (original) without rubber protection strip, in front, for Citroen 2CV. The bumper
overrider is beige-grey painted. Installed from 06/1963 to 07/1990. The bumper overrider is produced in the original Citroen shape. No reproduction
Bumper overrider rubber (reproduction), suitable for Citroen 2CV, starting from year of
construction 06/1963.
Bumper overrider with rubber protection strip (Made by Franzose), in front, for Citroen 2CV. The
bumper overrider is beige painted. Installed from 06/1963 to 07/1990.
Bumper overrider without rubber protection strip, in front, for Citroen 2CV. The bumper overrider
is beige painted. Installed from 06/1963 to 07/1990. Made in Europe.
Bumper overrider frame (verge) from synthetic. Suitable for Citroen 2CV6, Installed starting from
m year of construction 1985.
Bumper overrider in front, first version. Suitable for Citroen 2CV to year of construction 06/1963
The bumper overriders should be painted. Per piece! Made in Europe.
Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied with M7 nut and
washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Per piece! The screw is also installed in the Citroen AMI6. It is located on the side of the front fender and is screwed to the front mask.
Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied without nut and
washer (reproduction). Suitable for the front (2x) and rear (4x) bumpers. M7 thread, cross recess! Per piece.
Stainless steel bumper bolt (4x), suitable for Citroen 2CV. The bolts are supplied with M7 nut and
washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Set of 4 pieces!
Speedometer screen (120km/H), with printing (for the oval Veglia speedometer, 12 Volt). Suitable
for Citroen 2CV, AMI6, HY.
Speedometer screen (130km/H), with printing (for the oval Jaeger speedometer, 12 Volt). Suitable
for Citroen 2CV, AMI6, HY.
Speedometer scale, for the oval speedometer. In the style of the seventies. Pictured on yellow
background. Suitable for Citroen 2CV4 + 2CV6, HY.
Cover for speedometer, stainless steel, brushed, 2 parts. The screens are put simply under the
speedometer glass. Suitable for Citroen 2CV, final model. Made in Germany.
Speedometer case brown, for the oval speedometer (from synthetic). Suitable for Citroen 2CV, to
year of construction 1990.
Speedometer case black, for the oval speedometer (from synthetic). Suitable for Citroen 2CV, to
year of construction 1990.
Speedometer for Citroen 2CV from the fifties. The speedometer is on the left in the windshield
corner mounted. Reproduction. Mounting for speedometer light on 6.00 o'clock laterally in the case! Mounting speedometer cable: 3mm square
Speedometer case lining on the left. Color grey. Suitable for Citroen 2CV to year of construction
6/1972. Or.Nr. AZ985-293A
Speedometer case lining on the right. Color grey. Suitable for Citroen 2CV to year of construction
6/1972. Or.Nr. AZ985-294A
Speedometer small: Mounting base (plastic spacer base in grey) between speedometer and dashboard
Suitable for small speedometers with 6 + 12 volt. Citroen 2CV + Mehari. Or. No. AZ521-20
2525 Articles | Page 45 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
