Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

for Citroën 2CV Alle

3847 Articles | Page 25 of 77
Shipping country Shipping country

Indicator-flash relay round, electromechanical. 12 volts, max. 4x21 watt. 3 poles X/P/L !!! This

flasher relay is electromechanical, not electronic! This makes it insensitive to voltage fluctuations and it still makes real click-click noises (like in the past). Suitable for Citroen 2CV, Dyane, Mehari, AMI, DS, HY. Peugeot + Renault. Power supply symbol (+, X or B). Connection turn signal front + rear = symbol ( C or L ). Connection indicator light dashboard = symbol ( R or P ). This flasher relay is made exclusively for us! Attention: Pay attention to the pin assignment of the relay. Do not simply change the plugs! The plug designation is also printed again on the housing!

Video available VIDEO

Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY

Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.

PDF file available PDF FILE

Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

PDF file available PDF FILE

Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy

simple to bend. Kunifer does not rust). Clinch screws order seperate!

PDF file available PDF FILE

Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper

nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

PDF file available PDF FILE

Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel

alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!

PDF file available PDF FILE

Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Reproduction from Europe. Used

until year of construction 1990. On vehicles before year of construction 07/1968 the brake shoes were pressed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).

Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Original manufacturer quality

Made in Spain, Italy, fitted up to 1990. On vehicles built before 07/1968 the brake shoes were pushed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).

Brake shoes in front. Suitable for Citroen 2CV, of year of construction 06/1952 to 1982. (Vehicles

with drum brake at the front axle). Lining-wide about 35mm. 200mm diameter.

Brake shoe set rear, with wheel brake cylinders (piston 15,9mm). Suitable for Citroen 2CV4 + 2CV6

of year of construction 07/1981 to 1990. Dyane 6, AMI 8, Mehari. Brake system: LHM. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.

Brake shoe set rear, with wheel brake cylinders (piston 17,5mm). Suitable for Citroen 2CV4 + 2CV6

of year of construction 03/1970 to 06/1981. Dyane 4, AMI 6. Mehari. Brake system: DOT. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.

Brake shoe set in front, with wheel brake cylinders (piston 28,57mm). Suitable for Citroen 2CV4 +

2CV6, starting from year of construction 03/1970. Dyane 4. Brake system: DOT. Brand quality, no reproduction. Brake line connector: 8,0mm. For drum diameter: 200mm. Lining-wide: 36mm. Or. No. 95618228

Brake system repair set front, for Citroen 2CV6, consisting in only new spareparts. This set

enables to renew the complete front brake system: 2X new brake calipers, 1X brand brake discs, brand brake pads + hand brake pads and 1 liter LHM. 3x brake pipe seal.

Brake repair set small, if inadvertently DOT (incorrect) brake fluid used, instead of LHM

(correct). This set consists of all necessary rubbers + new brake calipers, master brake cylinder (Proprietary brand) + 2x wheel brake cylinders (ATE . For Citroen 2CV6 (with disc brake), if inadvertently normal brake fluid DOT were filled in. Note: Still much work, but the brake calipers, master brake cylinder and wheel brake cylinder are new parts!

Axle on the anchor plate, for the mounting from the lower eccentrics of the brake liners. Suitable

for Citroen 2CV. Or.Nr.: AZ 451 202A

Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is

supplied (without axle). Made in Germany.

Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV

and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.

360° VIEW

Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor

plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.

Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam

axle and anchor plate). Dimension: 9.5 x 27mm.

3847 Articles | Page 25 of 77
Shipping country Shipping country