for Citroën 2CV Alle
2CV, Fender rear, seal synthetic transparency, between fender and the C-support. Sutiable for
Citroen 2CV. Or.Nr. 5452990
2CV, Fender rear, fixing clip for the fender down at the body. Per page 1 clip is required
Suitable for Citroen 2CV.
Fender rear, screw set from high-grade steel, for the securement fender at the C-support and in the
wheel housing. Suitable for Citroen 2CV. Consisting of: 4x M5x16 DIN 85A2 + 3x 6,3x 19 DIN 7976 A2.
2CV, Fender rear, stone guards angle foil. (1 pair). Self adhesive. Reproduction technically and
d optically like original.
2CV, fenders front + rear. Stone guards corner (6 pieces) for the front fenders (under the front
turn signals) + rear on the front fender (above the mud flaps). Additionally on the front of the rear fenders. So, 1 complete set for the 2CV. Material: Polished cast aluminium
2CV, fender in front on the left. Mud flap (noise insulation) for the interior fender (Cover
transition fender to pedal base, grommet of the tie rod + exhaust pipe) . Suitable for Citroen 2CV6, of year of construction 1988 to 1990.
2CV, fender in front on the left. Mud flap (noise insulation) for the interior fender (Cover
transition fender to pedal base, grommet of the tie rod). Suitable for Citroen 2CV6, of year of construction 1988 to 1990.
2CV, Fender in front, fixing clip for the starting crank. By the Citroen 2CV up to 1970, was
fastened the starting crank inside to the fender.
2CV, Fender in front, cap nut from high-grade steel. For the securement of the front fenders at the
box sill. Suitable for Citroen 2CV.
2CV, Fender in front, nut for the securement! With integrated rotatable washer, like in the first
years of production. The lacquer will not be damaged if you tighten up the nut.
2CV, fender in front. Nut for the securement, like original. Suitable for Citroen 2CV, starting
from year of construction 1963 to 1990. The nut is galvanized and has a broader seating.
2CV, front wing, hollow rivet for fixation of mud flap! Finally the mud flap can be mounted again
with the original hollow rivets. Price per piece! (for a vehicle 8 rivets required).
2CV, front wing, hollow rivet head setter! This tool enables the original appearance of the hollow
rivet, after mounting. For the perfectionists among you! (it can also work using a hammer, but it does not look fine!)
2CV, fender in front, mud flaps, per piece (original). Suitable for Citroen 2CV final version until
1990. On the left + on the right suitable. Original Citroen (MCC), no reproduction
2CV, Fender in front, stone guards (1 pair) rear, at the front fenders. (Above the mud flaps)
Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.
2CV, Fender in front, stone guards (1 pair) underneath the indicators, for the front side of the
e fender. Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.
2CV, fender screw outside, rear at C-support. Suitable for Citroen 2CV. Optically 100% like the
original screws! Size: M5x16. Original, the srews were painted in fender color!
Fender screw rear, inside in the wheel housing. Suitable for Citroen 2CV. The screw fits also in
the Dyane, the securement of the front fenders + Renault R4. Reproduction from high-grade steel. Optically it`s a small different to the original ones. Measurements: 6,3x19
2CV, Fender screw rear, inside in the wheel housing. Suitable for Citroen 2CV. The screw fits also
by the Dyane, for securement of the front fenders! Reproduction made of metal, to 100% like original!
2CV, radiator grille made of aluminium, 3 bar design. Suitable for Citroen 2CV from the year of
construction 1961. This radiator grille was installed from 1967 to 9/1974. The radiator grille is produced in an original mould! Unfortunately, there are traces of processing (scratches). It was also produced and installed by Citroen.
2CV, radiator grille - 3 bar design. Made from plastic and then high-gloss chrome-plated. Suitable
for Citroen 2CV from the year of construction 1961. This radiator grille is actually too good and too beautifully chrome-plated! It was never made by Citroen in this perfect finish. But if you want a beautiful chrome-plated radiator grille in your 2CV, this would be our first choice. However, if your vehicle is completely original and even dates back to the sixties, I would rather go for the inferior (but visually more harmonious) aluminium radiator grille (our item number 16003).
2CV, radiator grille - 3 bar design. Made from plastic. Colour black. Suitable for Citroen 2CV from
the year of construction 1961. This radiator grille in the 3-bar design was never available in black from Citroen. But it looks very good on a 2CV Charleston (which originally also had a radiator grille with a black frame). For people who say: less is more.
2CV, Radiator grill from synthetic, color grey, with chromed verge. Suitable for Citroen 2CV. This
radiator grill is installed in some Charleston models.
2CV, plastic radiator grille (reproduction), black, with chrome surround. Suitable for Citroen 2CV
This radiator grille with black grille was never available as an original Citroen part. However, we think it looks really nice. It goes perfectly with the Charleston models. This reproduction is of really good quality and looks great. The original grilles are not better made!
2CV, Radiator grill from synthetic (original), color grey, with black frame. Suitable for Citroen
2CV. Original Citroen, no reproduction!
2CV, Radiator grill from synthetic (original), color grey, with chromed frame. Suitable for Citroen
2CV. Original Citroen, no reproduction!
2CV, Radiator grill from synthetic, color grey, with grey verge. Suitable for Citroen 2CV starting
from 1961. Installed one starting from 1973.
2CV plastic radiator grille, grey colour with black edging. Suitable for the Citroen 2CV. This
grille was used on the Charleston models. This reproduction is of really good and beautiful quality. The original grilles are not better made!
