Adapter ring from aluminum, in order to mount the original air filter on a new carburetor Solex 34
(Zenith to Solex). Suitable for Citroen 11CV with D engine.
carburetor and carburetor gasket sets for Citroën Alle
All fuel-controlling spare parts from us, are not applicable for fuel with an ethanol content of more than 5%. The warranty is not valid if high ethanol content such as E10 or greater is being used. Damages like swelling, dissolving or decay are a sign of using too much ethanol. Unfortunately, the developers of modern fuel are considering the impact on our cherished properties ever less.
63 Articles | Page 1 of 2
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
PDF FILE Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges, you can determine the
diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).
Injection pressure regulator, suitable for Citroen DS IE. Very good reproduction "Made in Germany
This controller corresponds to the Bosch number 0280 160 007 / 0 280 160 003 / 0 280 160 004. Citroen Or. No. 1D 5412357T
Fuel injection system, temperature sensor at the cylinder head (coolant sensor). Suitable for
Citroen DS IE. Replacement product from Hella. The plug must be converted!
Fuel injection nozzle rubber above (large rubber), suitable for Citroen DS21IE + DS23IE. Dimension
21.8 x 32.2 x 7,6mm. Or.Nr.: 5412354K
Fuel injection nozzle rubber down (small rubber), suitable for Citroen DS21 IE + DS23 IE
Dimension: 7.4 x 14.6 x 4,5mm. Or. No. DX144101A
Rubber ring (seal) between air filter and carburetor. Suitable for Citroen DS, old version
Dimension: 65 x 71 x 90 x 20mm. Or. No. DS142-106
Fixture for the throttle valve case (silent rubber). Suitable for Citroen DS IE. Diameter: 30mm
Height: 16mm. Or. No. DX142378A
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Crank case (engine block) air vent hose above. Connection to the air intake hose between carburetor
air filter. Suitable for Citroen DS with carburetor engine. Inside diameter: 15 + 17mm. Or. No. 5413610M.
Crank case (engine block) air vent hose down. Suitable for Citroen DS, to year of construction
07/1972 (carburetor engine). Diameter: Both sides 19-20mm. Length: 230mm (shorten if necessary). Or. No. DX13276C, DY13276A, DX132-76A
Idle stabilization completely, in the exchange. Idle stabilization does not have a vent screw
Suitable for Citroen DS IE (injection engine). Or. No. DXN142-020. Plus Old part deposit 150 Euro.
Idle stabilization completely, in the exchange. Idle stabilization does not have a vent screw
Suitable for Citroen DS carburetor. Or. No. Dx142-020. Plus Old part deposit 150 Euro.
Air intake hose (connecting hose), from the air filter to the throttle valve. Suitable for Citroen
DS IE (injection engine), all years of manufacturing (without air condition). Diameter: 66mm. Length: 550mm. Or. No. DX171241A
Air intake hose (connecting hose), from the air filter to the throttle valve. Suitable for Citroen
DS IE (injection engine), with air conditioning. Diameter: 66mm. Length: 730mm. Or. No. DX171206A
Air intake hose, between carburetor (Weber) and air filter. Suitable for Citroen DS, with the
following factory codes: DX, DJ, DJF, DY, DLF, DT, to year of construction 07/1972. Inside diameter carburetor-laterally: 69mm. Length about: 180mm. Or. No. DX1713
Air intake hose, between carburetor and air filter (Solex). Suitable for Citroen DS (with Solex
carburetor). Length about: 215mm. Inside diameter carburetor-laterally: 50mm. Or. No. DX171-3B
Air intake hose, between carburettor and air filter. Suitable for Citroen DS, from year of
construction 1957 to 1964. length approx.: 310mm. Inner diameter carburettor side: 50mm. Or. No. DM171-3
Air hose set (4 item) for engine warming up regulation. Suitable for Citroen DS IE. Or. No
DX144-214A + DX144-215A + DX144-216A + DX144-217A
Engine exhausting hose, at the throttle valve holder. 90° bent. Inside diameter: 16,50mm. Suitable
for Citroen DS IE. Or. No. DX132-281A
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Solex, carburetor nozzle set, for Solex 32 PBIC. Suitable for Peugeot 203 + Citroen 11CV
Consisting of: 1x main jet 190. Hollow bolt with external 135 nozzle. 1x slow-running jet 60. 1x mixing tube. 1x hollow bolt with internally 125 nozzle + 1x 50 nozzle.
Vacuum hose (1030mm), before the throttle valve (connection from the rear) and 3 path connector for
auxiliary air slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 1030mm. Or. No. 2D5411135K
Vacuum hose, behind the throttle valve (Connection laterally) and 3 way connector for auxiliary air
slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 608mm. Or. No. DX144-218A
Vacuum hose for the full load switch. Suitable for Citroen DS IE (injection engine). Outside
diameter: 10mm. Inside diameter short side: about 4mm. Inside diameter long side: about 5,5mm. Or. No. DX144243A
Vacuum hose, between throttle valve case and pressure sensor. Suitable for Citroen DS IE. Inside
diameter: 7,0mm. Or. No. DX144-226A
Connection rubber for the intake manifold. Suitable for DS IE (injection engine). Outside diameter
59mm. Height: 45mm. Per piece. Or. No. DX141117A
Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404
504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.
Carburetor, Solex 34 PBIC. Reproduction. Suitable for Citroen ID + DS, Installed of year of
construction 1965 to 1968.
Carburetor, type Solex 32PBIC. Reproduction. Suitable for Citroen 11CV, with PERFO engine. The
carburetor can be used also for Peugeot 203, 403, P60.
Carburetor sealing set small, Solex PBICA. Suitable for Peugeot 203, 403, 404. Citroen 11CV, HY, DS
(early years of construction).
Carburetor sealing set, for Solex carburetor 28/36 SFIF. Suitable for Citroen ID19, DS20, DS21. The
carburetor sealing set are supplied inclusive diaphragm + float needle valve.
Carburetor sealing set, for Solex carburetor 32SDID. Suitable for Citroen ID19. The carburetor
sealing set are supplied inclusive. Diaphragm + float needle valve.
Carburetor sealing set, for Weber 24/32DDC + 23/32DDC. Suitable for Citroen DS19. The carburetor
sealing set are supplied inclusive float needle valve.
Carburetor sealing set, for Weber 28/36 DDE + DLE. Suitable for Citroen DS. The carburetor sealing
set are supplied inclusive float needle valve.
Carburetor sealing set, for Weber 28/36 DM + DMA. Suitable for Citroen DS, starting from year of
construction 09/1972. The carburetor sealing set are supplied inclusive float needle valve.
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor oval (2 fittings). Suitable for Citroen ID19, HY, 11CV. Peugeot. Inside
diameter: 34mm. Spacer bolt center to spacer bolt center: about 61mm. Or. No. 481717. This seal fits almost to all Solex 34 carburetors.
Seal under carburetor, distance plate between intake manifold + carburetor (Solex carburetor)
Suitable for Citroen 11CV. Inside diameter: about 33mm. Outside diameter: about 77mm. Wide one: 50mm. Overall height: 5mm. Or. No. 481481
Seal under carburetor (insulating plate), between that intake manifold and the carburetor. Suitable
for Citroen DS, starting from year of construction 1965. Or. No. 1D5440931E
Preheating hose for the intake manifold (carburetor preliminary heating). Inside diameter: 19/24mm
Suitable for Citroen DS, to year of construction 07/1972 (Solex carburator). Engine: DV. Or. No. DV235-35A
63 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
