steering rods for Citroën Alle

Spacer for the tie rod end. Suitable for Citroen 11CV. Dimension: 16.5 x 31 x 0,5mm. Or. No. 602.052

Sheet metal cap on the tie rod pin. Suitable for Citroen 11CV + 15CV. Or. No. 602046

Bolt in the steering gear. (2x bolts, 3x seat shell). Repair kit, ball diameter 25mm. The bolts

take up the tie rods. Suitable for Citroen 11CV + Citroen HY, from year of construction 1948 to 1965. Or. No. 601847, 601849, 601836

Spring for the tie rod pin. Suitable for Citroen 11CV + 15CV. Dimension: 28 x 8mm. Or. No.89048

Rubber seal on the steering unit pin. Dimension: 32 x 16mm. Suitable for Citroen 11CV + 15CV. Or

No. 601946

Rubber cap for the tie rod end. Suitable for Citroen HY. Or. No. ZC9602046U.

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Steering gear bellow from rubber, suitable for Citroen 11CV + 15CV. Dimension: 58 x 132mm. Or. No

602135

• Suitable for this article
• 
  Collars clip strap with lock (made from metal). Overall length: about 500mm
  2,73 €

Steering gear bellow from rubber, suitable for Citroen HY.

• Suitable for this article
• 
  Collars clip strap with lock (made from metal). Overall length: about 500mm
  2,73 €

Hub nut for the lower steering unit pin. Suitable for Citroen 11CV + 15CV. Thread: M34 x 150. Or

No. 601877

Seat pan (bearing) for the steering unit pin. Suitable for Citroen 11CV + 15CV. Dimension: 28 x

11,5mm. Or. No. 601849

SM, steering gear bellow (2 pieces). Suitable for Citroen SM. Or. No. 1S5406838S

SM, tie rod outside on the left. Suitable for Citroen SM. Or. No. 2S5406864L

SM, tie rod outside on the right. Suitable for Citroen SM. Or. No. 2S5406865X

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Tie rod (per piece), without tie rod end. Length: 603mm. Suitable for Citroen HY, starting from

year of construction 09/1967. The tie rods are on the left + on the right identically constructed. Or. No. HY443-1

• Suitable for this article

Tie rod inside completely (on the left + on the right, inclusive connection fork. In the exchange

Suitable for Citroen DS, starting from year of construction 1965. Plus 75 Euro Old part deposit.

Tie rod inside, on the left. Suitable for Citroen DS, starting from year of construction 1965. Or

No. DX44301A

Clip, for the tie rod adjustment, the internal tie rod. Suitable for Citroen DS.

Tie rod inside, tie rod adjusting sleeve (connection from the tie rod to the tie rod end). Suitable

for Citroen DS.

Left track rod. Suitable for Citroen DS, starting from year of construction 1965. Or. No. 9D5409796F

Right track rod. Suitable for Citroen DS, starting from year of construction 1965. Or. No. 9D5409797

Tie rod bonded-rubber bushing, inside. Suitable for Citroen DS. Per piece. Dimension: 10 x 22 x

33mm.

Tie rods adjusting sleeves special! Suitable for Citroen 2CV + DS. It is an improved version with a

hexagonal. Scope of delivery: 2x adjusting sleeve + 4x counter nut! Note: Note: The adjusting sleeves have 1x left-hand thread + 1x right-hand thread, also the counter nuts! Thread: M14x1,25

Tie rods connection fork. This connection fork joins the internal tie rods. Suitable for Citroen

DS, starting from year of construction 1965. Or. No. DX443-73

Tie rod pin set (for 1 side). Suitable for Citroen 11CV. Dimension: 25 x 78mm. Or. No. 601876 +

601846

Tie rod end sealing sleeve down (for tie rods with lubricating nipple). Suitable for Citroen DS

Dimension: 13 x 40mm.

Tie rod end on the right, for the internal tie rod. Suitable for Citroen DS, starting from year of

construction 1965. Or. No. DX443-04A

Tie rod end repair set largely. Pin length: 74mm. Thread: M12 x 1,5. Suitable for Citroen HY

starting from year of construction 4/1969. Or. No. HY443-100 + ZC9601876U.

Tie rod end repair set small (pins with 2 bearing shells). Pin length: 74mm. Thread: M12 x 1,5

Suitable for Citroen HY, starting from year of construction 4/1969. Or. No. HY443-100 + ZC9601876U.

Tie rod end, with 22,0mm pin. Suitable for Citroen DS, to year of construction 1965. Or. No. DS4134A

Steering arm for linking the tie rods. Suitable for Citroen DS. New parts. Reproduction inclusive

bearing and seal. Note: Original is 46mm diameter Installed, we supplies the set with 47mm. The bearing seat must therefore be extended! Otherwise a repair kit would be useless!

• Suitable for this article
• 
  Steering lever arm: sealing at top + bottom, for the steering lever arm
  14,38 €

Reversing lever steering unit: Plate for the bearing block. Suitable for Citroen DS, to year of

construction 1965. Dimension: 35 x 43 x 10mm. Or. No. 620061

Reversing lever steering unit: Ball for the bearing of the lever. Suitable for Citroen DS, to year

of construction 1965. Diameter: 6,7mm. Or. No. Or. No. 4102S