clutch for Citroën Alle
87 Articles | Page 1 of 2
Spring for brake pedal + clutch pedal. Suitable for Citroen HY, Installed starting from year of
construction 12/1969. Diameter: about 20mm. Length: about 155mm. 41 turns. Or. No. HY435-25. Note: With Citroen HY, from year of construction 12/1967 to 12/1969, is installed 1x spring article no. 48240 (ZC9089071u clutch) + 1x article no. 48292 (HY435-25 brake).
Spring for brake pedal + clutch pedal. Suitable for Citroen HY, Installed up to year of
construction 12/1967. Diameter: about 12mm. Length: about 220mm. 31 turns. Or.Nr. ZC9089071U. Note: With Citroen HY, from year of construction 12/1967 to 12/1969 is 1x the spring article no. 48293 (ZC9089071u clutch) + 1x article no. 48292 (HY435-25 brake) Installed.
Spring largely, for clutch release sleeve. Suitable for DS, starting from year of construction
07/1972. Or. No. 5411216R
Spring largely, for clutch release sleeve. Suitable for Citroen DS, to year of construction
07/1972. Or. No. 2D5411216R
Clutch release sleeve, spring for the clutch release sleeve. Suitable for Citroen DS, of year of
construction 1968 to 1969. (3 finger, lever clutch). Or. No. D31477
Spring, for the clutch release fork lever. Suitable for Citroen DS, of year of construction 1970 to
1971. 25 turns. Diameter: 19,0mm. Overall length: 67mm. Or. No. 1D5417790X
Hydraulic pipe (bank of tubes) above on the centrifugal governor. Suitable for Citroen DS IE
starting from year of construction 06/1971. Or. No. DXN394-360A + 5D 5404190W
Hydraulic pipe (bank of tubes) between clutch cylinder and hydraulic cluth adjustment. Suitable for
Citroen DS, with carburetor engine. Or. No. DXN394-312A
Ball bearing for the clutch release sleeve. Suitable for Citroen DS with diaphragm (multi-plate
clutch). Installed from year of manufacture 1970.
Ball bearing for the clutch release sleeve. Suitable for Citroen DS, with 3 finger clutch
Installed from year of construction 1965 until 07/1972.
Ball bearing for the fly wheel. Suitable for Citroen HY. Inside diameter: 17,0mm. Outside diameter
40,0mm. Overall height: 12,0mm.
Clutch release sleeve, for clutch Diaphragm. Suitable for Citroen DS, from year of construction
1970 to 1972. Citroen SM, all years of construction. Or. No. DX314-01 + 5411213. The clutch release sleeve is in the exchange, plus 150 Euro Old part deposit.
Clutch release sleeve, for clutch Diafragma. Suitable for Citroen DS, starting from year of
construction 1971. Or. No. 5417535A. The clutch release sleeve is a new part. An old part return is not necessary.
- Suitable for this article
Clutch release sleeve, with recess (eye). In the exchange. Suitable for Citroen DS, starting from
year of construction 1965 to 1972. Plus 150 Euro Old part deposit. Or. No. DV31401
Clutch release sleeve, new part (Made in Germany). Suitable for Citroen DS19, up to year of
construction 1965. Or. No. DS31401. Old part return is not necessary.
Clutch release sleeve, without recess (without eye). In the exchange. Suitable for Citroen DS, of
year of construction 1962 to 1972 (3 finger - lever clutch). Or. No. DV31401A. Plus 150 Euro Old part deposit.
Clutch pressure plate (new part). Suitable for Citroen HY, from year of construction 10/1968. Or
No. HY8312-000B. The pressure plate are adjusted after Citroen work instruction H312/3 to a clutch disk with 9,3mm thickness. If your clutch disk should have another thickness, the pressure plate must be readjusted after Citroen instruction H312/3! Made by Franzose.
Clutch pressure plate adjustment tool MR-3457-30. Suitable for Citroen HY, from year of
construction 10/1968. This tool is for the height adjustment of the pressure plate. The pressure plate must be adjusted very accurately with each clutch assembly. Very important! See Citroen working instruction H312-3!
PDF FILE Clutch pressure plate spring set (repair set) + thrust ring pressure plate. Suitable for Citroen
HY, of year of construction 10/1968 to 1981.
Clutch pressure plate spring set (repair set). Green pressure spring. Suitable for Citroen DS 19
to year of construction 1965.
Clutch pressure plate spring set (repair set). Pink pressure spring. Suitable for Citroen DS, of
year of construction 1965 to 07/1972.
Clutch pressure plate with 3 fingers: Nut for adjustment of the levers (fingers). Thread: M8. Lead
of thread: 0,75. Wrench: 14mm. Or. No. ZC9491056U
Clutch pressure plate, for 3 lever (finger) clutch. In the exchange! Suitable for Citroen DS, of
year of construction 1965 to 07/1972. Diameter: 230mm. Or. No. DX3120. Plus 150 euros Old part deposit.
Clutch pressure plate, for 3 lever clutch. New part! Suitable for Citroen DS19, to year of
construction 1965. Diameter: 216mm. Or. No. D312-0. The pressure plate are adjusted after Citroen work instruction 312/3 to a clutch disk with 9,3mm thickness. If your clutch disk should have another thickness, the pressure plate must be readjusted after Citroen instruction 312/3! Made by Franzose.
Clutch pressure plate, for diaphragm clutch. New part! Suitable for Citroen DS, from year of
construction 07/1972. Citroen SM, all years of construction. Attention: The pressure plate is designed for 9mm centre bolt (Or. No. 2D 5432501Z). From year of construction 07/1971 to 06/1972 6mm centre pins were used (Or. No. DJ8312-000A).
Clutch adjustment tool, for checking and adjusting the clutch release sleeve. Citroen No. MR-3657
suitable for Citroen HY. Attention: The adjustment of the clutch release sleeve is very important for the Citroen HY!
Clutch completely (new parts), 3 lever (3 finger). Suitable for Citroen DS19, to year of
construction 1965. The clutch consists completely of new parts, and is adjusted according to Citroen work instruction 312/3, on the original adjustment tools, to the providet clutch disk. Ready to mount. Made by "Franzose".
Clutch set complete for Citroën 11CV. Improved high quality clutch reproduction. Replacement for
original clutch. No technical modification required. Very same weight as original clutch. Hardened pressure plate and driving disc are made in Germany. Good quality and easy fitting stop ring alignement. Release level with reinforced ball-bearing. Clutch disk: 215mm. Splines inside: 21mm. Splines outside: 25mm. 8 teeth.
Complete clutch, new parts only. Suitable for Citroen HY, starts from 10/1968 to 1981. Consisting
of: Pressure plate, pressure plate adjustment tool, clutch disk, release bearing. Attention: Please do follow the original Citroen working instructions H312-3, for the adjustment of the pressure plate, position of the release bearing, adjustment of the pedal travel! It is absolutely necessary to work according to the instructions for the Citroen HY. Please read first, then start working! Many things are adjusted differently than known from modern cars! A correct function is not given, if you do not work according to the original workshop manual!
Clutch disk. Reproduction. Suitable for Citroen DS, starting from year of construction 1965
Dimension: 228 x 155 x 3,2mm.
Clutch disk. New part. Suitable for Citroen DS, starting from year of construction 1955 to 1965
Diameter: 215mm: Friction lining t=9,3mm. Internal teeth: 12 teeth. Or. No. D313-01
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch adjustment flange sealing ring. Suitable for Citroen DS. Dimension: 8.9 x 12.7 x 1,9mm. Or
No. ZD9486100U. Made in Germany.
Clutch adjustment repair set. Hydraulic system LHS. Suitable for Citroen DS, of year of
construction 1960 to 1965.
Clutch corrector, Flector (connector) between carburettor + clutch corrector. Only suitable for
Citroen DS with semi-automatic transmission (bvh) Or. no. DX314-178
87 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
