front axle for Citroën Alle

4CV/Dauphine/Floride, bonded-rubber bushing for the kingpin. Suitable for Renault 4CV, Dauphine

Floride, Caravelle, Juvaquatre. Peugeot 201, 302, 402. Citroen C4, C6, Rosalie. Dimension: 12 x 26 x 36 x 32mm. Per piece. Or. No. 8535735

Cap (grease cap), for the radius arm in front down. Suitable for Citroen DS. Diameter: 61,2mm. Or

No. D412-83.

Axle (inclusive bonded-rubber bushings) for a-arm. Suitable for Citroen 11CV. Dimension: 22 x 264mm

Stub axle Disc spring washer. Suitable for Citroen DS. Dimension: 8.4 x 23 x 0,7mm. Or. No

ZC9619059U

Stop buffer, for the lower support arm. Suitable for Citroen 15CV. Or. No. 441173

Distance ring, for the ball pin, at the front axle. Suitable for Citroen HY. Or. No. ZC9427126U

Made in Germany.

Distance disk 0,5mm, torsion bar (axle supension). Suitable for Citroen HY + 15CV. Or. No

ZC9426905U + 426905

Adjusting nut for the lower ball pin at the wheel hub. Suitable for Citroen HY + 11CV. Thread: 40 x

150. Or. No. ZC 9441 190U + 441190. Made in Europe.

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating

wheel bearings, cardan joints etc.

• Suitable for this article
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing

grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Grease cap from rubber, for the pin holder at the front axle. Suitable for Citroen 11CV. Diameter

76,0mm. Or. No. 426618

Grease cap securement spring, for the pin holder of the front axle. Suitable for Citroen 11CV

Dimension: 63 x 69 x 3mm. Or. No. 426623

Grease gun, for lubricating grease cartridge. Hobby quality!

• Suitable for this article
• 
  Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• 
  Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy
  8,32 €
• 
  Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

• Suitable for this article
• 
  Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• 
  Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy
  8,32 €
• 
  Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red
  7,93 €

Rubber stop round (conically), for the front axle. Suitable for Citroen DS. Diameter: about 54,5mm

Height: about 23mm. Or. No. D4373

Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen DS BREAK

Or.Nr.1E5410591X

Rubber stop squarely, fixing clip small for the rubber stop. Suitable for Citroen DS BREAK

Or.Nr.1E5410590L

Rubber stop squarely, above, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or

No. 5410588

• Suitable for this article
• 
  Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen
  6,64 €

Rubber stop squarely, down, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or. No

5410589

• Suitable for this article
• 
  Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen
  6,64 €

Rubber buffer for the lower crossbar. Suitable for Citroen 11CV. Dimension: 62 x 40mm. Or. No

426664

Rubber plug for the axle suspension. Suitable for Citroen 11CV + 15CV. Dimension: 22 x 17.5 x

21,5mm. Or. No. 309810

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Ball pin sealing. Suitable for Citroen DS, to year of construction 1966. Inside diameter: 21,5mm

Or. No. DS413-85

Ball pin setting shim down (front axle). Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x

48,4mm. Heavy 5.50>5,51mm. Or. No. DX41304R

Ball pin collar retaining clip (for the lower ball pin). Suitable for Citroen DS + Citroen SM. Or

No. 1D5410072K

Ball pin nylon disk (fitting down + above). For Citroen DS, starting from year of construction

1965. Or. No. DS443-94

Ball pin repair set above. Suitable for Citroen HY. Length: 84mm. Or. No. ZC9441176U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €

Ball pin repair set down. Suitable for Citroen 15CV + Citroen HY. Length: 105mm. Or. No. 441177 +

ZC9441177U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €
• 
  Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or
  2,82 €

Balls (15 pieces) for the bearing seat of the torsion bar suspension. Suitable for Citroen HY

Diameter: 3,97mm. Per side are 15 balls mounted. Or. No. ZD 9411 200 U

Ball cup completely above. (Wheel suspension). Fixture for the upper pin of the wheel hub. Suitable

for Citroen 11CV. Diameter: 52mm. Or. No. 426607

Ball cup down (front axle). Suitable for Citroen 11CV. Diameter: 60mm. Or. No. 426613

M35, rubber stop for the suspension. Suitable for Citroen M35 (Wankel). The front axle has 4

rubbers. You can use this rubber also for the rear axle (with little easy changes). Or. No. AL437-1 + AL437-3

Collar for the ball joint, at the wheel hub. Suitable for Citroen DS, SM + HY. Very good

reproduction. Dimension about: 16x79mm. Or. No. ID 5410027F

Nut for the upper pin holder, at the front axle. Suitable for Citroen 11CV. Measurement: M16 x 1,5

Or.Nr.426531

Nylon disk, for the ball pin down + above. Suitable for Citroen DS, up to year of construction

1965. Or. No. D41387B

• Suitable for this article
• 
  Ball pin sealing. Suitable for Citroen DS, to year of construction 1966. Inside
  15,77 €

Nylon disk, for the wheel hub above (9mm). Suitable for Citroen DS, to year of construction 1965

Or. No. D41387A

Upper wishbone: Axle (with guide sleeve + nut), for the upper support arm of the front axle. Axle

dimensions: 263 x 36mm. Suitable for Citroen HY + 15CV. Or. No. ZC9427082U + ZC9426959U + ZC9427082U. Made in Europe

Upper wishbone: Shim (0.5mm), for the upper front suspension arm of the front axle. Dimension 36.3

x 42mm. Suitable for Citroen HY. Or. No. ZC 9441 217 U

Upper wishbone: Shim (1.0mm), for the upper front suspension arm of the front axle. Dimension 36.3

x 45 x 1.0mm. Suitable for Citroen HY. Or. No. ZC 9441 218 U

Wishbone washer for upper swing arm, HY.Or.Nr.ZC9427146U

Upper wishbone: Sleeve for axle, for the upper support arms of the front axle. Sleeve dimensions

36.5 x 40 x 126mm. Suitable for Citroen HY + 15CV. Or. No. ZC9426959U. Made in Europe

Upper wishbone: Silent bushing. Suitable for Citroen HY. Dimension: 56 x 38 x 36 x 47mm. Or. No

H4333

• Suitable for this article
• 
  Wishbone washer for upper swing arm, HY.Or.Nr.ZC9427146U
  3,63 €

Lower wishbone: Shim (0.1 mm), for the connecting axle between the lower support arms of the front

axle. Suitable for Citroen HY. Or. No. ZC 9427 088 U

Lower wishbone shaft: Large repair kit for the lower wishbone shaft (splined shaft). Suitable for

Citroen HY. Consisting of: 1 splined shaft (H 434-99A), 2 splined shaft sleeves, 2 silent block rubbers, press-in tool. The rubbers can be pressed in with a standard workshop press! On almost all HYs, the splines on the shaft are so rusted that the shaft splines in the sleeve skip. Reproduction Made in Germany.

Lower wishbone shaft: Repair kit, small, for the lower wishbone shaft (splined shaft). Suitable for

Citroen HY. Consisting of: 2 splined shaft sleeves, 2 silent block rubbers, press-in tool. The rubbers can be pressed in with a standard workshop press! On almost all HYs, the splines on the shaft are so rusted that the shaft splines in the sleeve skip. Reproduction, Made in Germany.

Wheel hub shaft seal gearbox side (soft shaft seal), suitable for Citroen DS. Good, soft

reproduction. Dimension about 129.25 x 160.75 x 10mm.

Wheel hub shaft seal wheel side (harder shaft seal), suitable for Citroen DS. Dimension about

129.25 x 160.75 x 10mm.

Wheel hub in front on the left, in the exchange. Suitable for Citroen DS. The wheel hub is repaired

with new ball joints (ball pins) and new wheel bearing. Per piece. Plus 100 Euro Old part deposit. Or. No. 9D5409788U