4CV, clutch release sleeve clutch, with graphitic coil. Suitable for Renault 4CV. Outside diameter
graphitic coil: 47mm. Inside diameter graphitic coil: 26,5mm. The bearing is a strengthened reproduction.
clutch for Renault Alle
55 Articles | Page 1 of 2
Clutch release sleeve (reproduction). Suitable for Renault R4, R5, R6, R8, R12, R18, Talbot 1510
Horizon, Solara. Inside diameter: 23,5mm. Outside diameter: 56mm
Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of
a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.
Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch
with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3
Clutch release sleeve, suitable for Renault V6, Alpine A310 + R30V6. Inside diameter: 32mm. This
clutch release sleeve fits only at vehicles, which have a clutch disk with 10 teeth!
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various
Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99
Clutch release sleeve, suitable for Renault R16, R18, R20, Fuego. Inside diameter: 30/43mm. Outside
diameter: about 68,5mm. Overall height: 27,5mm.
Clutch completely. Suitable for Alpine A110, of year of construction 1968 to 1976. Engines: 812.00
810,05 + 1300S. Diameter: 170mm.
Clutch completely. Suitable for Renault Caravelle (956cc). Renault R8 (956cc + 1108cc), to year of
construction 1965. Diameter: 160mm. Teeth: 10.
Clutch set Renault rear engine (Floride, Dauphine, Caravelle, A106, etc.). 10 teeth (the clutch
disk has torsion springs). 160mm diameter. Completely like original from new parts produced. An old part return is not necessary. Please observe the clutch adjustment in the service manual!
Clutch completely. Suitable for Renault R10 (R1190. 1108cc), starting from year of construction
1969. Engine: 688-02. Diameter: 160mm. Teeth: 20.
Clutch completely. Suitable for Renault R10 (R1192. 1289cc), of year of construction 1969 to 1972
Engine: 810-03. Diameter: 170mm. Teeth: 20.
Clutch completely. Suitable for Renault R12 (1289cc + 1389cc), starting from year of construction
10/1974. Diameter: 180mm.
Clutch completely. Suitable for Renault R12 (R117 + R133. 1289cc). Engine: 810.02 + 810-05 +
810.06. Gearbox: 351. Power: 40 to 60KW. Installed from 07/1969 to 09/1974. Diameter: 170mm.
Clutch completely. Suitable for Renault R15, TL, GTL (R1300, CH101021>), of year of construction
09/1975 to 1980. Engine: 810-10. Diameter: 180mm.
Clutch set completely. Suitable for Renault R15T, TL, GTL (R1300, >CH101020), of year of
construction 1971 to 1985. Engine: 810-10. Diameter: 170mm.
Clutch completely. Suitable for Renault R16. Engine: 843.01. Diameter: 200mm. Year of construction
01/1971 to 12/1979. Original manufactur.
Clutch completely. Suitable for Renault R4 (782, 852cc + 1108cc), to year of construction 1975
(R2106, R2109 1968>, R2391, R1120, R1123, R1126). Gearbox 354. The clutch has 160mm diameter, the clutch disk of 20 teeth. Reproduction. Or. No. 7701464763 (completely). 7701033150 (clutch disk). 7701032876 (pressure plate). 7701616841 (clutch release sleeves)
Clutch completely. Suitable for Renault R4 (852cc + 1108cc), to year of construction 1975 (R2106
R2109 1968>, R2391, R1120, R1123, R1126). Gearbox 354. The clutch has 160mm diameter, the clutch disk 20 teeth. Brand quality (VALEO). Or. No. 7701464763 (complete). 7701033150 (clutch disk). 7701032876 (pressure plate). 7701616841 (clutch release sleeve)
Clutch set Renault R4 (852cc + 1108cc). 20 teeth. 160mm diameter. Gearbox 354. Installed to year of
construction 1981 (R1129, R2108, R2370, R2430). R-5 TL (956 cc) >1979. R6 TL (1108cc) 1969 > 1980. R8S + R10 (1108cc) 1970 > 1971. Reproduction
Clutch complet. Suitable for Renault R4 (956cc + 1108cc), of year of construction 1977 to 1992
(R1128, 112C, S128, 210B, 239B, R2370 chassis N° 153413 - > N°). Renault R5, R7, R12. The clutch has 180mm diameter, the clutch disk 20 teeth. Brand quality (SACHS/Valeo). Or. No. 7711130003 (complet). 7701349936 (clutch disk). 7711130000 (pressure plate). 7701348231 (clutch release sleeve).
Clutch complet. Suitable for Renault R4 (956cc + 1108cc), of year of construction 1977 to 1992
(R1128, 112C, S128, 210B, 239B, R2370 chassis N° 153413 - > N°). Renault R5, R7, R12. The clutch has 180mm diameter, the clutch disk 20 teeth. Reproduction. Or. No. 7711130003 (complet). 7701349936 (clutch disk). 7711130000 (pressure plate). 7701348231 (clutch release sleeve).
Clutch completely. Suitable for Renault R4 with 745cc engine, from the seventies. Diameter: 160mm
Finetoothed (20 teeth). Old version of the pressure plate (3 lever) + graphite clutch release sleeve. 7701033216, 0854842900, 0854673000
Clutch completely. Suitable for Renault R5 turbo (R122), of year of construction 07/1981 to
04/1982. Power: 68-93KW (CH 11951>). Motor type: C6J. Gearbox: NG5.
Clutch completely. Suitable for Renault R5 turbo (R122B), of year of construction 07/1982 to
06/1985. Power: 81-11ßKW (>CH 11951). Motor type: 840.26 + C6J.7.50. Gearbox: NG5.
Clutch completely. Suitable for Renault R5 Turbo (R122B), of year of construction 07/1983 to
06/1985. Power: 79-108KW (CH 11951>). Motor type: C6J2.28. Gearbox: NG5.
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch taking cylinder. Suitable for Renault Alpine A310 (2,7L). Alpine V6 2,9GT. Renault R20, R25
R30. Piston diameter: 28,6mm. Or. No. 7700732756 + 7700588892
Clutch disk, suitable for Renault Alpine A310 + Renault R30. Diameter: 235mm (235 x 162 x 3,2mm)
Number of teeth: 10. Hub profile: 24,5x29
Clutch disk, suitable for Renault Caravelle, R8. Diameter: 160mm. Number of teeth: 20. Hub profile
15.2 x 17,3-20N. Manufacturer: Sachs
Clutch disk. Diameter: 235mm. Teeth: 21. Suitable for Renault Alpine A310. Renault R30
(235x162x3,2), (21x24xev)
R16, silent block angularly suitable for the clutch cable securement, for Renault R16. Or.Nr
0830051600 + 0830015300.
R20/R30/Alpine, clutch master cylinder sealing set 19mm. Suitable for Alpine starting from 01/1076
6, R20, R25, R30 all models.
R20/R30/Alpine, clutch taking cylinder sealing set 28,6mm. Suitable for Alpine starting from
01/1076, R20, R25, R30 all models.
55 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
