crankshaft-camshaft-piston-flywheel for Renault Alle

4CV, piston + liner (4 item). Suitable for Renault 4CV, 1 series (R1062). Engine: 680.01 + 662/2

engine capacity: 747cc. Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 60,0mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is imperative that the liners are mounted with copper rings at the bottom. Our article number 80183

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the
  9,82 €

4CV, crankshaft thrust washer (axial clearance), 2 oversize 0,10. Suitable for Renault 4CV, until

1957!

4CV, crankshaft thrust washer (axial clearance), standard dimension. Suitable for Renault 4CV

until 1957!

4CV, camshaft drive wheel (Novotex). 4/100 oversize. Suitable for Renault 4CV, of year of

construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

4CV, camshaft drive wheel (Novotex). 6/100 oversize. Suitable for Renault 4CV, of year of

construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Dimension: 0,25 undersize.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Dimension: 0,50 undersize.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Standard size.

4CV, spur gear (Novotex) of 31 teeth. Suitable for Renault 4CV, of year of construction 1949 to

1952. Inside diameter: 18mm. Outside diameter: 97,7mm.

4CV, cam follower (closed version). Suitable for Renault 4CV

4CV/Dauphine, piston + liner (4 item). Suitable for Renault 4CV (R1062). Engine: 680.01 + 662/2

engine capacity: 747cc (engine block Dauphine). Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 62,5mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for
  9,82 €

4CV/Dauphine, connecting rod bearing screw. Suitable for Renault 4CV + Dauphine.

4CV/Dauphine, Intermediate gear engine control. Suitable for Renault 4CV + Dauphine

4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm

Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.

4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter

132mm. Inside diameter: 24mm. Original from Ferrozell!

4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm

Outside diameter: 53,5mm. Wide one: 19mm.

R4/4CV, piston ring set (engine 680). Suitable for Renault R4, of year of construction 1963 to

1967. Renault 4CV, Dauphine. Bore: 54,5mm. Heavy one: 2,0mm + 2,0mm + 3,5mm. Set for 4 pistons.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 2,0mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 3,5mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Alpine A110, piston + liner (4 item). Suitable for Alpine A110. Engine capacity: 1596cc. Bore

77,8mm. Piston pin: 21 x 66,50mm. Piston rings: 1,75 +2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1289cc).

Alpine110, R12 Gordini, R17TS, piston + liner (4 pieces). Suitable for Renault alpine one 110, R12

Gordini, R17TS (R1313, R1323). Engine: 807 12/20. Engine capacity: 1564cc. Bore: 77mm. Piston pin: 21 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm

Piston pin: 23.5 x 72,0mm. Piston rings: 1,5 + 2.0 + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.
  69,32 €

Alpine A310, piston + liner (4 item). Suitable for alpine A310 (4 liners). Engine capacity: 1605cc

Bore: 78,0mm. Piston pin: 22 x 66,25mm. Piston rings: 1,7 5+ 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine
  217,18 €

Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174

This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....

Dauphine, piston + liner (4 item). Suitable for Renault Dauphine. Engine: 1093cc. Bore: 60mm

Piston pin diameter: 14mm. Outside diameter down: 62,4mm. Outside diameter above: 72,8mm. Height totally: 121,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Dauphine/4CV, cam follower (hollow version). Suitable for Renault Dauphine + Renault 4CV (you must

used the push rods from the Dauphine. Because, the 4CV has normally closed cam followers). Engine: 750cc + 845cc. Diameter: 19,0mm. Or. No. 7700529305

Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the following Renault

liners. Our. No. 80058 (Renault 4CV, R1062). Per piece.

Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following

Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75

2.0 + 4,0mm. Renault R5, R12, R15 (R1224, R1330, R1337).

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings

1,75mm + 2,0mm + 4,0mm. Renault R5, R6, R10, R12 (R1192, R1170, R1171, R1337, R2126, R2136, R2137).

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 841-843-C7-D7 (1647ccm). Bore: 79mm

Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R16, R18, Alpine A310.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2664cc. Suitable for Peugeot 504 V6, 604

V6. Renault R30, R25 V6, Alpine A310.

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2849cc. Suitable for Peugeot 604 V6

Renault R30, R25 V6, Alpine A310.

P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1

chain link, length: 44 chain links.

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc

Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 V6/604 V6/R30/Alpinen 310 V6, connecting rod bearing set (bimetal), standard measurement of

60 mm, with stroke offset. Engines 2,7L + 2,85L.

Piston rings for V6 engine. 2,7L. 88mm bore. Suitable for Peugeot 504 V6 Cabrio + Coupe. Peugeot

t 604 V6. Renault R30 + Alpine A310 V6. Complete set for 6 pistons! Dimension of piston rings: 1,5mm + 2,0mm + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing kit small (trimetal). 0,30 oversize. For

52mm crankshaft. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing set small (trimetal). Standard dimensions

For 52mm diameter. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). 0,30 oversize. Suitable for

Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). Standard dimensions. Suitable for

Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

P 504V6/604/R30, liners sealing rings down (6 fittings). Suitable for Peugeot 504 V6 + Peugeot 604

V6. Renault R30. Talbot Tagora 2.6. 2664cc. Inside diameter: 91mm. Outside diameter: 100mm.

P 504V6/R30, camshafts shaft seal (left-hand rotation). Suitable for Peugeot 504 V6, 604 V6

Renault R30 V6, Citroen XM. Dimension: 32 x 45 x 8mm.

Primaquatre, camshafts drive wheel (Novotex). 52 teeth. Outside diameter: 161mm. Inside diameter

22mm. Original from Ferrozell