front axle for Renault Alle
81 Articles | Page 1 of 2
4CV/Dauphine/Floride, bonded-rubber bushing for the kingpin. Suitable for Renault 4CV, Dauphine
Floride, Caravelle, Juvaquatre. Peugeot 201, 302, 402. Citroen C4, C6, Rosalie. Dimension: 12 x 26 x 36 x 32mm. Per piece. Or. No. 8535735
4CV/Dauphine/Floride, bonded-rubber bushing for the wishbone. Suitable for Renault 4CV, Dauphine
Floride. Dimension: circa 16 x 36 x 38 x 35mm. Per piece. Or. No. 8535734
Stub axle repair set (2 pieces), with bonded-rubber bushings. Suitable for Renault 4CV (2 version)
Renault Dauphine, Alpine A106, Alpine A108, Floride R1092. Or. No. 9815621
Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating
wheel bearings, cardan joints etc.
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Grease cap for 160mm brake drum. Suitable for Renault R4, Caravelle, Floride, Dauphine and many
other Renault. Front axle and rear axle. Overall height: 27mm. Outside diameter: 42mm. Or. No. 0607035200
P 104/VISA/C15/LNA/Talbot/R14, wishbone in front on the left, Peugeot 104, Citroen LNA, C15, VISA
Talbot Samba, Renault R14. Made in Italy
R12/R15/R17/R18 TL+TS/R20 >1980, ball and socket joint down. Pin height to area for screwing: 65mm
Thread height: 23mm. Thread measurement: M12 x 1,25. Or. 7701460886
R12/R15/R17/R18 TL+TS/R20 until 1989, ball and socket joint above. Pin height to area for screwing
65mm. Thread height: 25mm. Thread measurement: M12 x 1,25. Or. 7701460885
R12/R15/R17/R18, ball joint lower. Suitable for Renault R12, R15, R17, R18. Pin amount to area for
screwing: 62mm. Thread height: 23mm. Thread measurement: M12 x 1,25.
R16, ball and socket joint above, for Renault R16, starting from year of construction 9/1968
(R1151, 1152, 1153, 1154, 1156, 1157). On the left + on the right fitting. Pin height to area for screwing: 65mm. Thread height: 18mm. Thread measurement: M12 x 1,25. Or. No. 7701451902 Made in Italy
R16, ball and socket joint, for Renault R16 down. Installed starting from year of construction
09/1968. (R1151,1152,1153,1154,1156,1157). Pin height to area for screwing: 75mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 7701453022. Made in Italy
R4, seal for the cover (shell) of the torsion bar mount, centred under the floor pan. Suitable for
Renault R4, R5, R6, Rodeo. Or. No. 770244008 + 0428245200
R4, fixture for the thrust strut bearing front on the left. Suitable for Renault R4. (Sheet metal
holder to weld, substitute for defective plate)
R4, fixture for the thrust strut bearing front on the right. Suitable for Renault R4. (Sheet metal
holder to weld, substitute for defective plate)
R4, plastic bushing on the stabiliser bar suspension outside. Suitable for Renault R4. This plastic
bushing is pushed onto the suspension with the long metal tube and prevents the bracket from buckling too much on the stabiliser bar. Inner diameter: 16.5mm. Outer diameter: 25mm. Overall length: 25mm. Or. No. 7705002001
R4, wheel stud wheel hub, front + rear. Dimension: M10 x 1.25mm. Length: 31.50mm. Suitable for
Renault R4, R5, R6. Or. No. 7700628765
R4, stabiliser bearing made of plastic. Suitable for Renault R4 first models. These plastic shells
are mounted on the stabiliser bar and screwed together with the metal bracket (new R4s have a rubber bushing there). Inner diameter: 13mm. Outer diameter: 23mm + 28mm. Overall length: 42.5mm. Or. No. 6075416 + 6075371
Anti roll bar repair set, for 12mm metal sleeve. Suitable for Renault R4, R5. Includes: 2x clip, 2x
rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 51mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
R4, anti roll bar repair set, for 10mm anti roll bar. Suitable for Renault R4 + R5. Contents: 2x
clip, 2x rubber bush for clip, 2x suspending rubber outside (metal sleeve length: 51mm). Note: The rubber bush for fixture anti roll bat at the body has always about 15-16mm diameter
R4, Anti roll bar. Diameter: 12mm. Without fastening material Suitable for Renault R4 with the
following engines: 845ccm³, 956ccm³ + 1108ccm³. Or. No. 7700717921 + 7700675016
R4, anti roll bar rubber (per piece). Suitable for Remault R4. Securement the anti roll bar at the
body! Have caution, the rubbers have 12mm inside diameters.
R4, ball and socket joint down on the right. Suitable for Renault R4, of year of construction 1962
to 1968. Or. No. 0981724600 Made in Italy. Thread dimension: M12. The cone tapers from 12.5mm to 14mm. Overall length to the inside of the screw flat: 47mm. Overall length to outside of the screw flat: 52mm.
R4, front axle mounting plate, front on the left. Suitable for Renault R4, starting from year of
construction 1969. Or. No. 7700525702
R4, front axle mounting plate, front on the right. Suitable for Renault R4, starting from year of
construction 1969. Or. No. 7700525703
R4, front axle rubber set, for one side. Suitable for Renault R4. Contents: 3x bonded-rubber
bushing, stabilizer bearing + bearing flange for thrust strut under the wishbone.
R4/F4/F6, front axle stabiliser. Diameter: 16mm. Without fixing material. Suitable for Renault R4
R4 F4, R4 F6, R6. The 16mm stabilizer was originally only used for R4 F4 + R4 F6. However, it can be fitted to the saloons without any problems. The thicker stabiliser gives a slightly firmer ride. Mady in Europe
R4/R16, ball and socket joint above. Suitable for R16 R1152 to chassis no.02401. Pin height to area
for screwing: 61mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 7701453299 / 7701455299
R4/R5, thrust strut bearing. Suitable for Renault R4. Note: Only suitable for thrust strut with
fork mounting. (Support of lower wishbones). Per piece. Or. No. 7700500113
R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve
10,1mm. Metal sleeve lengthens: 32mm. Or. No. 7702003408
R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve
10,1mm. Metal sleeve lengthens: 51mm. Or. No. 7702107984
R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve
12,1mm. Metal sleeve lengthens: 32mm.
R4/R5, anti roll bar suspension point outside. Suitable for Renault R4 + R5. Diameter metal sleeve
12mm. Metal sleeve lengthens: 51mm. Or. No. 7702107985
R4/R5, Anti roll bar repair set, for 10mm anti roll bar. Suitable for Renault R4 + R5. Contents: 2x
clip, 2x rubber bush for clip, 2x hanging up rubber outside. Metal sleeve length = 32 mm. Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
Anti roll bar repair set, for 12mm anti roll bar. Suitable for Renault R4 + R5. includes: 2x clip
2x rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 32mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
81 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
