heating and ventilation for Renault Alle
62 Articles | Page 1 of 2
Dauphine, heater hose short, from the water pump to the heat exchanger. Suitable for Renault
Dauphine. Inside diameter: 18mm.
Dauphine, heater hose long, from the water pump to the heat exchanger. Suitable for Renault
Dauphine. Inside diameter: 20mm.
Rocker switch for the heater blower (1 speed). 33x5x19.5mm (installation dimension). Suitable for
many Renault and Peugeot models.
Rocker switch for the blower for heating ((2 speeds). Suitable for Renault R4, starting from year
of construction 1984. Renault R5.
Rocker switch blower for heating (2 level). Suitable for Renault R4, of year of construction 1975
to 1984. Renault R16. Peugeot, various model`s. Dimension: 36 x 18mm.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Cooling system vent screw. This vent screw has been installed in various Renault models (R4, R5
R8, R16, etc.). However, depending on the year of construction and model, other versions are also available. Please compare. Thread: M6 x 1. Or. No. 7701007672
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
R16, Heater hose front left (inlet heat exchanger heater - heater radiator). Suitable for Renault
R16 L-GL-GLS-TL (R1150, R1152, R1153). Or. No. 0857730600
R16, Heater hose front right (heat exchanger heater - heater radiator outlet). Suitable for Renault
R16 TS-TX (R1151, R1154, R1156). Or. No. 7700563327
Seal under heater thermostat (screwed on the heater radiator). Suitable for Renault R4. Or. No
0855665500. Made in Germany
Heater hose, supply to the heater radiator. Suitable for Renault R4, starting from year of
construction 1962 (R1120, R1121, R1122, R1123 to CH1151254). Inside diameter: 15,0 + 18,0mm. Or. No. 7705026830
Radiator hose for the heater radiator (return pipe). Suitable for Renault R4, of year of
construction 09/1966 to 12/1988. Connection heater radiator to engine. Or. No. 7700695524. Connection diameter: 16 + 18mm.
R4, Radiator hose for the heater radiator. Suitable for Renault R4. Connection from the heater
radiator to the engine. Connection diameter: 16,0 + 18,0mm. Or. No. 7700628621
R4, radiator hose for the heater radiator. Suitable for Renault R4, of year of construction 09/1966
to 12/1988. Fusion heater radiator to the connecting tube. Or. No. 7700695527. Connection diameter: 16 + 18mm.
R4, ventilation grille (with rear flap) under windscreen (new model, made of plastic). Suitable for
Renault R4, from 1983 onwards. Very good reproduction. Or. No. 7700643583. Made in Europe
PDF FILE R4, ventilation grille (without rear flap) under windscreen (new model, plastic). Suitable for
Renault R4, from year of manufacture 1983. Or. No. 7700643583. Made in Europe. This grille is as neatly finished as our number 87923!
R4, ventilation grille under windscreen (old model, plastic). Suitable for Renault R4, until year
of construction 1983. Or. No. 7700690152. Made in Europe
R5, Heating valve sealing ring for the flange. Suitable for heating valve 83410. For Renault R5 +
R7. Dimensions: 22 x 17 x 2,5mm.
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
62 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
