engine bonnet, front panels, radiator grills for Renault Alle
51 Articles | Page 1 of 2
Drain hose for the water tank under the wind deflector (A-pillar). Actually suitable for the
Renault R16. However, as many people are looking for these exhaust air hoses (regardless of whether for French, German or other cars), the hose can also be used for other vehicles. Better than nothing. The hose is very flexible and has a kind of funnel on one side. Total length: 640 mm. Inner funnel diameter: approx. 25 mm. Inner hose diameter: 12 mm. Outer diameter: 17 mm.
Dauphine, bonnet. Suitable for Renault Dauphine. Original supplier. Not a replica (NOS). The sheet
metal parts may have some rust or small dents!
M8 x 25 screws, with 20mm head. The suitable for radiator grill securement to Citroen 11CV. This
screw can be also universal used, for example fasten from bumpers. Or. No. 331101
R16, interior fender in front on the right: Sheet metal end point in front, laterally of the
headlamp (sheet metal shell). Suitable for Renault R16. Or. No. 0256419400
R16, interior fender in front on the left: Sheet metal end point in front, laterally of the
headlamp (sheet metal shell). Suitable for Renault R16. Or. No. 0256419300
R4, Rubber stop in front, for the bonnet (mounts at the inside of the fender. The rubber leads the
bonnet if it is closed). Suitable for Renault R4.
R4, retaining clip for the bonnet prop rod (the clip is mounted on the inner wing). Suitable for
Renault R4. Or. No. 7703077008
R4, radiator grill securement tie-clip (5 fittings). Suitable for the aluminum radiator grill from
the Renault R4, of year of construction 1968 to 1974. Or. No. 082452800
R4, ventilation grille (with rear flap) under windscreen (new model, made of plastic). Suitable for
Renault R4, from 1983 onwards. Very good reproduction. Or. No. 7700643583. Made in Europe
PDF FILE R4, ventilation grille (without rear flap) under windscreen (new model, plastic). Suitable for
Renault R4, from year of manufacture 1983. Or. No. 7700643583. Made in Europe. This grille is as neatly finished as our number 87923!
R4, ventilation grille under windscreen (old model, plastic). Suitable for Renault R4, until year
of construction 1983. Or. No. 7700690152. Made in Europe
R4, bonnet catch cable (bonnet stop when opened). Suitable for Renault R4. Completely made of
stainless steel! Made in Germany. Or. No. 7700533524
R4, Bonnet, for angular indicators. The bonnet have a ventilation louver under the radiator grill
Suitable for Renault R4. The bonnet can have light dents, since it comes from a production of the eighties. Shipping only by freight forwarder.
R4, Bonnet, for angular indicators. The bonnet does not have a ventilation louver under the
radiator grill. Suitable for Renault R4. The bonnet can have light dents, since it comes from a production of the eighties. Shipping only by freight forwarder.
R4, Rubber buffer for the bonnet. Suitable for Renault R4. Diameter: 22,58mm. Height: 11,21mm
Mounting hole centrically: 5,0mm.
R4, hood lock (latching), 1 version. The fixing bolts are directly one above the other. Newer R4
(R1128) have off center fixing bolts! Suitable for Renault R4, starting from year of construction 1962. Or. No. 099002200
R4, Crossbar in front (Napoleon hat), old version with grommet for a starting crank! Suitable for
Renault R4. Good quality, Or. No. 820664400
R4, crossbar in front, suitable for Renault R4. Very good reproduction, like original. Final
version, without grommet for starting crank. Made from zinc coated sheet. Made in Europe.
R4, Renault emblem for the synthetic radiator grill. Suitable for Renault R4. 2x pins that thicken
conically from 5.0 to 6.0 mm!
R4, front left inner mudguard panel (with the correct beads and welded fixing nut on the rear)
Suitable for Renault R4 GTL.
R4, front right inner mudguard panel (with the correct beads and welded fixing nut on the rear)
Suitable for Renault R4 GTL.
R5 Alpine, stainless steel heat shield, mounted on the inside of the fender. Only suitable for
Renault R5 Alpine (not for Turbo). Made in Germany, handmade!
R5, bonnet shims (adjustment shims). Suitable for all Renault R5 models. These shims are used to
adjust the bonnet. We supply the shims as a set with 1x 1.0 mm, 2.0 mm and 3.0 mm shims (originally only 1.0 + 2.0 mm were available). Or. No. 7700533918 + 7700533919. Made from stainless steel!
R5, engine bonnet insulation mat. Suitable for Renault R5 (Phase 1), including all Alpine + Alpine
Turbo models. Or. No. 7700705149
R5, Renault emblem for the bonnet (made of aluminium). Suitable for Renault R5 (Phase 1), from year
of construction 1973 > 1979. Or. No. 7701348733. Fastening: 2x pins with 3mm diameter
R5, Renault emblem for the bonnet (made of aluminium). Suitable for Renault R5 (Phase 2), from year
of construction 1979 > 1984. Dimension: 62 x 50mm. 2 fixing pins with 4.5mm diameter
51 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
