for Sonstige-Citroen Dyane
Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc
Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.
Retaining clip emblems for Citroen, Renault, Peugeot, old models. 2.5mm inner diameter (i.e. for
2.5mm pins on the emblems). Length: 7.5mm. Per piece
Locking spring on the left (brake caliper), for the parking brake pad. Suitable for Citroen 2CV
starting from year of construction 1981.
Locking spring on the right (brake caliper), for the parking brake pads. Suitable for Citroen 2CV
starting from year of construction 1981.
Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV
Dyane, AMI, AK, AZU, ACDY.
Fixing clip for the gasoline line. (large version, 6mm). Suitable for our chassis "Made in
n Germany". Not suitable for the original chassis.
Fixing clip for the brake pipe. (small version, 4mm). Suitable for our chassis "Made in Germany
Not suitable for the original chassis.
Mounting for the disc brake air duct on the gearbox (the bracket that is screwed to the gearbox)
Suitable for Citroen 2CV6, Dyane, AK, AMI8. Or. No. AM452-96
Fixture on the left, for the mounting of the engine suspension. Suitable for Citroen 2CV4. Or. No
AZ13386. Original Citroen. New old stock (NOS)
- Suitable for this article
Parking brakeadjust tool, for Citroen 2CV with disc brake. Thus the eccentric of the hand brake
handles can be adjusted optimally.
Handbrake lever (handle) repair kit. Suitable for Citroen 2CV6 + 2CV4. The repair kit consists of
the push button (to unlock) and the push rod.
Hand brake handle tension spring. Mounted between hand brake handles at the chassis and the
chassis. Suitable for Citroen 2CV with front drum brake. (to year of construction 1981). Or.Nr.: A454 9
Hand brake cable adjusting nut (butterfly nut). Suitable for Citroen 2CV with front drum brake
Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV, of year of construction 1966 to 1981
Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable on the left (long cable). Suitable for Citroen 2CV, Dyane, Mehari. Vehicles with
disc brake in front. Length: 675mm.
Hand brake cable on the left (short cable). Suitable for Citroen 2CV, Dyane, Mehari. Vehicles with
disc brake in front. Length: 555mm.
Hand brake cable mounting in front on the left. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder)
Suitable for Citroen 2CV.
Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circuit
brake system (DOT + LHM). Very good reproduction, from foam rubber. Or. No. AM453-211. Made in Germany.
Master brake cylinder rubber seal (1 pair, green dyed)) for the brake fluid reservoir. Brake system
LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder rubber seal (per piece) for the brake fluid reservoir. Brake system LHM. Dual
circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder repair set, brake system LHM. Dual circuit brake system. Suitable for Citroen
2CV6 starting from year of construction 9/1981. The repair set contains all sealing rubbers. For piston diameters: 17,5mm.
Master brake cylinder repair set. Brake system DOT. Dual circuit brake system. Suitable for Citroen
2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
AZU, AK, of year of construction 05/1967 to 1973. Hanging brake pedal! Piston diameter: 19,0mm. Brake line connector: 2x 9,0mm (M9). Or. No. AY453-03D + AY453-03E. Note: The master brake cylinders are converted from us on a better base valve (residual stress valve).
Master brake cylinder, brake system DOT. Single circuit brake system. Piston diameter: 19,0mm
Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 11/1970 to 7/1976. Hanging brake pedal! Made in Europe.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.
Master brake cylinder, brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV, of
year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.
Master brake cylinder, brake system DOT. Dual circuit brake system. Piston diameter: 20,6mm. Brake
line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.
Master brake cylinder, brake system LHM. Dual circuit brake system. Suitable for Citroen Mehari
Acadiane + AMI8 (vehicles with disc brake in front). Piston diameter: 17,5mm. Brake line connector: 2x M10x1. Reproduction.
Master brake cylinder, LHM brake system. Dual circuit brake system. Brand manufacturer! Suitable
for Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brake). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Master brake cylinder, LHM brake system. Dual circuit brake system. Reproduction. Suitable for
Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brakes). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Made in Europe. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!
Main cable harness, suitable for Citroen Dyane, starting from year of construction 09/1974 to
07/1981. Made in Germany.
Screw set (2 item) for the securement the lever (parking brake) at the brake caliper. Suitable for
Citroen 2CV6, Dyane, Mehari, AMI8.
Tail - Shutter. Suitable for Citroen Dyane sedan. Quickly installed (the brackets are only inserted
into the upper and lower rear window rubber). A typical accessory from the sixties + seventies. Made in France
Rear rack from polished high-grade steel, with wooden strips. Dimension: 890 x 470mm. Drilling
measurement: 490 x 445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Rear rack from polished high-grade steel. Dimension: 870 x 370 x 100mm. Drilling measurement: 490 x
445mm. For the securement you require: 4x screw M6x20 (20173), 4x washer M6 (20270) + 4x rubber washer (15493).
Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through
and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
