Bulb 12 V. H4, glass yellow for H4 lamp. The glass is inverted over the H4 lamp. The glass can be
dismantled at any time again.
for Sonstige-Citroen Dyane
2022 Articles | Page 16 of 41
Bulb adapter rings (2 pieces), from double filament bulb to H4. With this, every headlight that
originally has a double filament bulb (P45) can be converted to an H4 bulb. You get much better light! Universal suitable.
Bulb conversion kit, from H4 (base P43t) to LED light! This kit replaces the H4 bulb with an LED
bulb. Significantly brighter light. But beware: This is not authorised in Germany! The kit consists of 2x H4 LED bulbs. You don't have to convert anything, just replace them! For the experts: Colour temperature (K): 6000. Lumen: 2400. 12 Volt.
Double filament bulb set. 12 Volt. Suitable for Citroen 2CV6 with double filament bulbs. Consisting
of: 2x 14031 double filament bulb main headlights, 2x 14034 parking light headlights, 6x 14035 front + rear indicators + brake light, 2x 14066 tail light, 1x 14364 interior light, 2x glass fuse 10A + 2x glass fuse 15A.
Bulb set H4. 12 Volt. Suitable for Citroen 2CV6 with H4 headlights. Consisting of: 2x 14030 main
headlights H4, 2x 14034 parking light headlights, 6x 14035 front + rear indicators + brake light, 2x 14066 tail light, 1x 14364 interior light, 2x glass fuse 10A + 2x glass fuse 15A.
Bulb base (plug) for headlamp. Double-filament bulb + H4. Suitable for Citroen 2CV, HY, DS, Renault
R4, Peugeot 403, 404, etc.
Rubber stop at the suspension pot (for small suspension pot). Suitable for all Citroen 2CV
starting from year of construction 1955. Or. No. A435-1b. That is only the rubber, without metal plates!
- Suitable for this article
Rubber stop distance disk (for the rubber stop of the front axle at the chassis). Suitable for
Citroen 2CV. Reproduction from high-grade steel. Made in Germany. Thickness: 1,0mm
Rubber stop for the front axle (small, round version), mounts laterally at the chassis. Suitable
for Citroen 2CV, AK, ACDY. Thread: M7 x 22. Diameter: 35mm. Height: 23mm.
Rubber stop for the front axle, mounts laterally at the chassis. Suitable for Citroen 2CV, AK
ACDY. The suitable nut has the number 12120. Made by Franzose/CiPeRe in Europe.
Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen 2CV4
2CV6. Reproduction, good quality. Made by Franzose/CiPeRe in Europe. We have now had the rubber stop made ourselves, as the quality has deteriorated in recent years. We have only cast the metal plate firmly with the rubber so that the weak point of water (rust) penetrating between the rubber and the metal plate can no longer occur.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Rubber seal profile (by meters), for nearly all older Citroen, 2CV, HY, DS. (Door + luggage
compartment seals)! Made in Germany! Quality: EPDM 317. Easily rubbed in with talcum powder. Wide one: 25,5mm
Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be
missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.
Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing
Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
Rubber ring with hook, for the upholstery of the seats. 50 pieces! Very good quality from the
original manufacturer. These rubber rings are slightly more elastic, softer, than the replica rubber rings (18026). Suitable for Citroen 2CV, Dyane, HY. Or. No. A922114.
Rubber ring with hook, for upholstering the seats. Per piece. Replica. Suitable for Citroen 2CV
Dyane, HY. The replica rubber rings are somewhat tighter, harder, than the original rubber 18442. Or. No. A922114. In the 2CV seat there are 22 rubbers in the lower seat and 26 rubbers in the backrest. There are approx. 100 rubbers in a seat bench.
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). By tears in the rubber
hose, the engine can pull wrong air!
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). Very , very good
reproduction of original manufacturer. The hose is made of the same material and not so wobbly as the reproduction hoses.
Rubber hose for Citroen 2CV4 + 2CV6, between carburetor + air filter (round carburetor). Not
suitable for oval carburetor!
Rubber socket for the wiper system nozzle, large version. Suitable for Citroen DS, starting from
year of construction 1967. Citroen 2CV, all models. Inside diameter: 6,0mm. Outside diameter: 16mm. For sheet metal bore: 11mm.
2022 Articles | Page 16 of 41
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
