securement. Manufacturer "Record France". The gas pressure shock absorbers are a bit firmer (but not hard), but have a more sensitive response. Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. We only use gas pressure dampers on our 2CVs. So that's our recommendation!
securement. Manufacturer "Record France". The gas pressure shock absorbers are a bit firmer (but not hard), but have a more sensitive response. Price is for 2 fittings. Mounting: Synthetic cap to the wheel! The shock absorbers please 5x push through, before they are mounted. Length compressed: 340mm. Extended: 500mm. We only use gas pressure dampers on our 2CVs. So that's our recommendation!
Sachs! The Boge Sachs shock absorber is very soft!
Boge Sachs! The Boge Sachs shock absorber is very soft!
Measurement: 12,5 x 35 x 5mm.
absorber pin 12066 is fastened with a 27mm key!
mounting. Bad reproduction.
shock absorber. Made in Germany, from high-strength steel.
rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. High quality reproduction from the EU.
h rod tube has an outer diameter of 18mm. The fit (offset on the valve push rod tube) on the cylinder head is 17x34mm. Suitable for all 2CV engines with 602ccm. Reproduction
for the follower tubing seal with wide connecting post. Per piece!
10/1972. Suitable for the follower tubing seal with narrow connecting post. Per piece!
improved material, making them significantly more durable.
Manufacturer original "GLASER".
adhesive strips! Our bumper 16514 is high polish! Made in Europe.
manufactured. (High version). The bumper is manufactured into complex manual work and is polished then about 3 hours!
V, Installed of year of construction 09/1974 to 07/1990. Made in Germany
instead of black adhesive strips and fits only on the low (7,6cm) high bumper.
1975 instead of black adhesive strips and fits only on the low (7,6cm) high bumper.
1975, instead of black adhesive strips.
high bumper. Installed from 09/1974 to 07/1990. Made in Germany.
from 09/1974 to 07/1990. Electrolytically galvanized! Made in Europe.
Installed from 1963 to 09/1974. Made in Europe.
washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Per piece! The screw is also installed in the Citroen AMI6. It is located on the side of the front fender and is screwed to the front mask.
washer (reproduction). Suitable for the front (2x) and rear (4x) bumpers. M7 thread, cross recess! Per piece.
about 900mm. Made in France.
Reproduction. (The speedometer cable is held with a clip in the gearbox). Not suitable for 2CV6.
shank has a diameter of 8mm.
protection please put regularly some oil on it.
PDF FILE 
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
