Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after
production, and corresponds to the original rubber.
heating and ventilation for Citroën 2CV 2CValt
53 Articles | Page 1 of 2
Ventilation shutter 2CV to 1963/64. Without attachments. Linking of the ventilation shutter is
about centric! The seal and the trim are the same, than from the other 2CV. Made in Europe.
Ventilation shutter completely (original), for Citroen 2CV. The Ventilation shutter is supplied
with seal and trim! The Ventilation shutter must paint before be adapted! Original Citroen, no reproduction!
Ventilation shutter completely, for Citroen 2CV. Reproduction out of sheet metal. The Ventilation
shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutter aluminum strip, 2CV. The strip is a little more matte than the original. 12x
nut M3 (20166) are required!
Ventilation shutter trim from polished high-grade steel, suitable for Citroen 2CV. Own
reproduction. 12 x nut M3 are required. (20166)
2CV, ventilation flap, re-fitting grid for air distribution towards the driver. This ingenious
little grid redirects the airflow towards the driver when the ventilation flap is open. The grid is fitted within couple of minutes, using the clips supplied. So: ventilation system variable according to speed! We wouldn't want to do without it at high temperatures!
PDF FILE Ventilation shutter, pin for Ventilation shutter linking (without clamp), Citroen 2CV, for all
years of construction. Diameter: 5,0mm
Securing clip suitable for the Ventilation shutter, for Citroen 2CV. (Securement installing
handwheel at the Ventilation shutter)
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
Heating hose from felt, for Citroen 2CV from the fifties. Cheap, but optically not original
reproduction. Diameter: 70mm. Length: 420mm.
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater
cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.
Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version
With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.
Knob from rubber, for the opening mechanism of the Ventilation shutter, suitable for Citroen 2CV
HY, 11CV. With the 2CV of the final years of construction, is the knob also for the headlight vertical adjustment Installed.
Knob for opening mechanism of the Ventilation shutter. Color blue, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color cream, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color grey, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color white, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color green, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color orange, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color red, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color black, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock
Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, colour black, screwable, for heating adjustment and air distribution. Reproduction made
of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, chrome plated, screwable, for heating adjustment and air distribution. Reproduction
made of metal! Suitable for Citroen 2CV, DS, HY.
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Nut for the handwheel of the headlight adjustment and the Ventilation shutter. Suitable for Citroen
2CV. Heater adjustment for Citroen HY + DS19
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
53 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
