2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm. Height over everything
7,50mm. Or. No. AM124-11C
Cylinder head for Citroën 2CV 2CValt
38 Articles
Elbow seal suitable for inlet + exhaust, for Citroen 2CV with 12 HP engine. (Vehicles with 3
connectors of the Inlet + exhaust manifold). Significant reproduction of the original manufacturer!
Elbow seal inlet + exhaust for Citroen 2CV old. The seals are installed with vehicles, whose elbow
spider with 3 screws per side are fastened.
Valve push rod tube for 2CV4 (425ccm engine). Length totally: 165mm, diameter 16mm, fit (set off)
at the cylinder head: 15mm.
Follower tubing seal - sheet metal plates, for Citroen 2CV to year of construction 1972. Suitable
for the follower tubing seal with wide connecting post. Per piece!
Valve push rod tube seal for 2CV (old version). Single seal, without bar in the center. You need 4
pieces per car. Manufacturer: Original Glaser, no reproduction.
Valve 2CV old, inlet, (12/14 HP, 425ccm³). Installed from year of construction 1955 to 1963
Measurement: 34,8x8x77,9 mm. Or. No. A124-7A
Valve 2CV4, exhaust, 425ccm engine. Installed starting from year of construction 1964. Dimension
32,1 x 8.5 x 89mm. Or. No. AZ124-8
Valve 2CV4, inlet. 425ccm ³ engine. Installed starting from year of construction 1964. Dimension
39 x 8 x 91mm. Or. No. AZ124-7
Valve cap from aluminum, for Citroen 2CV! These valve caps are installed on 375cc, 425cc, 435cc
engines. On the 435cc engines only a short time.
Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of
construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9
Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8,50mm inside diameter, 12,55mm
outside diameter, 49mm long.
Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm inside diameter, 12,55mm
outside diameter, 50,50mm long.
Valve guide exhaust for 2CV-AZL, AZU. Installed from 1949 to 1966. 8mm inside diameter, 12mm
outside diameter, 40mm long.
Valve guide inlet for 2CV-AZAM, AZU. Installed from 1966 to 1968. 8mm inside diameter, 12,55mm
outside diameter, 53mm long.
Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside diameter, 12,55mm
outside diameter, 45mm long.
Valve spring cotter for Citroen 2CV to year of construction 1963. Suitable for inlet + exhaust
valve. Per valve 2 valve spring cotters are required. Or.Nr. AZ124-18
Valve stem seal inlet, for AMI6, 2CV4. Inside diameter 7,8mm, outside diameter 9,9mm-13,2mm
strength 10mm. Per piece!
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
38 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
