for Citroën 2CV AK-AZU
3 way connector for the brake pipe`s, centrically at the rear axle (screwed joint 8mm). Suitable
for Citroen 2CV, Dyane, Mehari.
Brake line connector on the brake hose, at the rear left + in front on the right. Suitable for
Citroen 2CV. Length: 47mm. Or. No. A45377
Brake line connector on the wheel brake cylinder. Suitable for Citroen 2CV, to year of construction
1963. Length: 20mm. Very good reproduction. Made by Franzose
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection from the
master brake cylinder to the rear axle. Or.Nr.: A453-32
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Crosswise connection
on the rear axle and mounting of the brake hoses. Or. No. A453-33
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection rear
from the brake hose to the wheel brake cylinder.
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 07/1964. Connection in front
on the left to the wheel brake cylinder.
Brake line, suitable for Citroen 2CV, AZU, AMi6, to year of construction 1970. Transverse
connection (crosswise) on the rear axle. Connector: M9. Brake hose diameter: 4,5mm. Overall length: 940mm.
Brake line, suitable for Citroen 2CV, of year of construction 06/1970 to 1981. Connection from the
T-link to the front right wheel brake cylinder. Brake line diameter: 3,75mm. Connector: M8x1
Brake line, suitable for Citroen 2CV, of year of construction 06/1970 to 1981. Connection from the
T-link to the front left wheel brake cylinder. Brake line diameter: 3,75mm. Connector: M8x1
Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Citroen Mehari to year of
construction 01/1972. Connection from the T-link to the front right wheel brake cylinder. Brake line diameter: 4,5mm. Connector: M9x1,25. Or. No. AY45331
Brake line, suitable for Citroen 2CV, to year of construction 06/1970. Connection of the master
brake cylinder (front side) to the brake hose. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: about 345mm. Or. No. AY453353A
Brake line, suitable for Citroen 2CV, of year of construction 1964 to 1972. Connection of the
master brake cylinder on the T-link at the rear axle. Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 1950mm. Or.Nr.: AY 453-32B
Brake line, suitable for Citroen 2CV, of year of construction 07/1964 to 02/1970. Connection at
that rear wheel-radius arm, from the brake hose to the wheel brake cylinder. On the left + on the right fitting! Brake line diameter: 4,5mm. Connector: M9x1,25. Length: 630mm. Or. No. AY453-34B + AY453-34C.
Brake line, suitable for Citroen 2CV, of year of construction 07/1964 to 1970. Connection from the
master brake cylinder to the rear axle. Connector: M9. Brake hose diameter: 4,5mm. Overall length: 2650mm.
Brake line, suitable for Citroen 2CV, of year of construction 1952 to 1970. Connection to the wheel
brake cylinder in front on the right.
Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both
sides: M8x1.25. Optimal if 2 lines are to be connected to each other.
Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic
fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV (for the brake hoses), Installed to year of construction 1981 (2CV with drum brake in front). Citroen DS to year of construction 1967, for the hydraulic lines.
Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connector
M9). Suitable for Citroen 2CV + Citroen HY.
Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear
brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.
Brake light switch old version. Suitable for Citroen 2CV (6 volt), AMI6 + Citroen ID19, up to year
of construction 08/1961 (DM576-02, does not fit Citroen DS). The brake light switch is mounted in the engine compartment on the firewall. Reproduction. Or. No. AZ57602 (2CV). However, with a little skill, the brake light switch can also be converted to fit the DS19 with Or. No. DS576-02A. The brake light switch for DS19 is no longer available.
Stop light switch at the brake pedal. Connection flat plug. Connector: M12x1. Suitable for Citroen
2CV6, DS, CX, BX, HY, GS
Brake caliper seal (for sealing the two brake caliper halves) for our brake caliper 13013
Dimensions: 10 x 6.2 x 1.9 mm, suitable for Citro
Brake disks "sport" front (2 pieces). Suitable for Citroen 2CV, from year of construction 1981 up
to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
Brake hose mounting plate, rear left. Fits Citroen 2CV, up to year of manufacture 07/1964. The
brake hose is attached to the bracket with the banjo bolt (hence the 10mm hole in the bracket). Reproduction. Or. No.: A453-67
Brake hose mounting plate, rear left. Suitable for Citroen 2CV, from year of manufacture 07/1964 to
01/1972. The brake hose with its M14 thread is pushed through the holder and locked with a thin M14 nut (hence the 16mm hole)! Made of stainless steel! Or. No. AM453-67. Made in Germany.
Brake hose mounting plate, rear right. Fits Citroen 2CV, up to year of manufacture 07/1964. The
brake hose is attached to the bracket with the banjo bolt (hence the 10mm hole in the bracket). Reproduction. Or. No.: A453-67A
Brake hose mounting plate, rear right. Suitable for Citroen 2CV, from year of manufacture 07/1964
to 01/1972. The brake hose with its M14 thread is pushed through the holder and locked with a thin M14 nut (hence the 16mm hole)! Made of stainless steel! Or. No. AM453-67A. Made in Germany.
Brake hose rear, suitable for Citroen 2CV + AMI6, to year of construction 1966. Length: 310mm. One
side male thread M10x1. The other side has a female thread M10x1.
Brake hose in front, suitable for Citroen 2CV, starting from year of construction 1966. Length
280mm. One side male thread M12x1. One side female thread M10x1. Or.Nr.: AM453-29A. Made in Spain.
Brake hose in front, suitable for Citroen 2CV, to year of construction 07/1964. Length: 285mm. One
side male thread M12x1. The other side has female thread M10x1. Or.Nr.: AM453-29 AV. Made in Spain.
Brake hose in front, suitable for Citroen AK, AKS, AZU (van). Length: 302mm. 1 x male thread M12x1
1x male thread M14 x 1.5 with additional female thread M9x1,25.
Brake hose in front, suitable for Citroen AMI6. Length: 335mm. One side male thread M14x1,5 with
female thread M9x1,25. The other side has a male thread M12x1. Made in Spain.
Rear brake drum, new part. 180mm diameter, for the large wheel bearing. Suitable for Citroen AZU
AK, ACDY, AMI. The brake drum is supplied without wheel bearing.
Drum in front. Suitable for Citroen AK400, 350, AMI6, Dyane. 4 hole securement. 220mm diameter. The
drum is outside ripping. Or.No.: AM4516
Brake drum spring hook from HAZET. Extremely useful when fitting springs to the brake drum. Also
ideal for fitting the rubber rings to the seats of 2CVs and Dyanes!
