for Citroën 2CV AK-AZU
2528 Articles | Page 24 of 51
VIDEO Plastic guide for the parking brake in the front wall. This plastic glider is in the engine
compartment Installed. Suitable for Citroen 2CV, starting from year of construction 12/1973. Or.Nr.5432385
Sheet metal holder bracket for the plastic guide (16063) of the parking brake. Suitable for Citroen
2CV starting from 12/1973. (Synthetic guide by the front wall into the engine compartment.) Made in Germany.
Hand brake handle tension spring. Mounted between hand brake handles at the chassis and the
chassis. Suitable for Citroen 2CV with front drum brake. (to year of construction 1981). Or.Nr.: A454 9
Hand brake cable adjusting nut (butterfly nut). Suitable for Citroen 2CV with front drum brake
Installed to year of construction 1981. Threat: M7
Hand brake cable for drum brake. Suitable for Citroen 2CV, of year of construction 1966 to 1981
Length: 400mm. Or.Nr.: AZ4541F/D
Hand brake cable mounting in front on the left. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18
Hand brake cable mounting in front on the right. (Securement at the anchor plate). Suitable for
Citroen 2CV with front drum brake. Or.Nr.: A454-18a
Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder)
Suitable for Citroen 2CV.
Master brake cylinder fixing bolt (in the front wall). Suitable for Citroen 2CV with hanging brake
pedal. The screw are the same, if you have a single circuit brake system or dual circuit. Also for LHM and DOT brake system.
Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circuit
brake system (DOT + LHM). Very good reproduction, from foam rubber. Or. No. AM453-211. Made in Germany.
Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with single circuit
brake system and hanging brake pedal. Or.Nr.: A453-211. Made in Germany.
Master brake cylinder rubber seal (1 pair, green dyed)) for the brake fluid reservoir. Brake system
LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!
Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for
Citroen 2CV6 + 2CV4 with hanging brake pedal. (for the brake system LHM + DOT). Per piece
Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for
Citroen 2CV starting from year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 20,63mm (13/16 inch).
Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for
Citroen 2CV to year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 22mm.
Master brake cylinder repair set. Brake system DOT. Dual circuit brake system. Suitable for Citroen
2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.
Master brake cylinder push rod (adjustable). Length: 88mm. Mounted between brake pedal and master
brake cylinder. Suitable for Citroen 2CV with hanging pedals.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
AZU, AK, of year of construction 05/1967 to 1973. Hanging brake pedal! Piston diameter: 19,0mm. Brake line connector: 2x 9,0mm (M9). Or. No. AY453-03D + AY453-03E. Note: The master brake cylinders are converted from us on a better base valve (residual stress valve).
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, to
year of construction 1963. Piston diameter: 22mm. Brake line connector: 1x M12x1. Connection brake fluid reservoir: M16x1,5. Or. No. AM45303. Made in Spain.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
with being pedals. Piston diameter: 22mm. Brake line connector: 1x M12x1 + 1x M10x1mm. Connection brake fluid reservoir: M16. Very rare export version! This master brake cylinder was used also as clutch master cylinder at 2CV Sahara!
Master brake cylinder, brake system DOT. Single circuit brake system. Piston diameter: 19,0mm
Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 11/1970 to 7/1976. Hanging brake pedal! Made in Europe.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1963 to 1967. Piston diameter: 22mm. Brake line connector: 1x M9 + 1x M12. Connection brake fluid reservoir: M16x1,5. Made in Spain.
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of
year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.
Master brake cylinder, brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV, of
year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.
Master brake cylinder, brake system DOT. Dual circuit brake system. Piston diameter: 20,6mm. Brake
line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.
Main cable harness, suitable for Citroen 2CV6, starting from year of construction 07/1981 to 1990
With connection for reversing lamps. The tail cable harness must be specially ordered! Made in Germany.
Screw set (2 item) for the securement the lever (parking brake) at the brake caliper. Suitable for
Citroen 2CV6, Dyane, Mehari, AMI8.
Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through
and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.
Heating air fan in snail form. By the design a larger air orifice is possible. For conversion in
Citroen 2CV. Without built-in set. The suitable built-in set has the number 14505.
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
Heating hose from felt, for Citroen 2CV from the fifties. Cheap, but optically not original
reproduction. Diameter: 70mm. Length: 420mm.
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
Heating hose lined (with foam on the inside). Suitable for Citroen 2CV6, 2CV4 + AMI6. Own
reproduction. With aluminium core, making it much more durable! 500 mm long, 90 mm outer diameter, 15 mm foam.
Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the warm
air distributor in the engine compartment and the air duct at the windshield. The hose is isolate with foam material.
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose made of rubber! Complete set!
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose! Complete set!
2528 Articles | Page 24 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
