for Citroën 2CV AK-AZU
2528 Articles | Page 26 of 51
Inspection kit for Citroen 2CV6. Consisting of: 1x oil filter + seal, 1x V-belt, 2x valve cover
gasket, 1x air cleaner element, 1x set of ignition cables silicone, 1x condenser, 1x ignition contact, 2x spark plug.
Instrument fixture (made of metal) for 1 additional instrument with 52mm diameter. Universal
fitting. Made in Germany.
Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal
fitting. Made in Germany.
Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable
harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citroën 2CV, DS, ID, HY, 11CV, all classic Renault and Peugeot models.
Under cover made of sturdy cotton fabric, for 2 seats in the front! The jute cover has been
replaced by a sturdy cotton fabric. You sit a little tighter and the bottom cover does not tear so quickly. The set is suitable for 2 front seats!!! Made in Germany
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set suitable for 1 seat. Suitable for Citroen 2CV.
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set is for 1 seat bench. Suitable for Citroen 2CV. Fits for symetric and asymetric bench.
Cable harness seal for the engine front wall. Material: Foam rubber. Diameter: about 45mm. Suitable
for Citroen DS + Citroen 2CV, HY.
Cable harness mounting kit. Consisting of: 6x rubber fixing strap. 2x protection rubber for the
plug-in connections at the head light bracket. Suitable for Citroen 2CV6 + 2CV4.
Cable harness in the head light carrier, for Citroen 2CV to year of construction 1971
Reproduction. Or. No. A511-74
Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved
material (NBR/SBR fabric rubber)
Cable binder from rubber, length 155mm. Wide 35mm! For main cable harnesses to 30mm diameter. Now
manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable binder from rubber. Length: 50mm. Made in Germany. Now manufactured from improved material
(NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
Cable terminal strip, with 3 connection. Suitable for Citroen 11CV + 15CV. This terminal strip can
be also universal used. Optimally to connect the positive cables cleanly. Or. No. 710161
Headlight plug (with long connection cable + round plugs), for Bilux or H4 bulb. Suitable for
Citroen DS, Citroen 2CV, Citroen HY. Made in Germany.
Connector suitable for main headlights, for Citroen 2CV, Dyane, Ami6+8, HY. The plug is supplied
with short cable ends and round plugs.
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Box nut suitable for the securement of the wheel cover, for Citroen 2CV, Peugeot 204 + 304. The box
nut is pressed from the rear into the rim! Thread M10.
Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Citroen
2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip, 4x spring hinged tie bar adjustment from high-grade steel. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspension
pot hinged tie bar at the radius arm). Measurement: 45 x 14,29mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, galvanizes. Suitable for Citroen 2CV rear. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 45 x 14mm. Reproduction from South America.
2528 Articles | Page 26 of 51
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
