for Citroën 2CV AK-AZU

Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension pot

hinged tie bar at the radius arm). Measurement: 42 x 12,21mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

• Suitable for this article
• 
  Fixing clip for the triangle pin. (fitting for small and large triangle pins)
  0,79 €

Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle

pin largely, 2x triangle pin small, 8x clip. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84 + AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!

Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 1-4mm. Color black

Customer cut return not possible!

• Suitable for this article
• 
  Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range
  8,63 €

Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range 5-8mm. Color black

Customer cut return not possible!

• Suitable for this article
• 
  Edge protection, U-profile universal. By meters, 13 mm wide. For clamping range
  7,83 €

V-belt 10x763mm. Suitable for Citroen 2CV6 + 2CV4, up to the year of construction 1990. Branded

product BOSCH.

License plate handle made of metal, anodizes. Suitable for all license plates, who are 520mm wide

Made in Germany

License plate handle from chromium-plated synthetic. Suitable for all license plates, who are 520mm

wide!

License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4

Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany

License plate light cap centrically. Suitable for Citroen 2CV, to year of construction 1954. AZU

250 + HY (early years of construction, license plates above over tail gate)

License plate light complete (1x set = 1x left + 1x right). Suitable for Citroen 2CV until year of

construction 1963, AZU + HY. Colour: light grey. This set consists of 2 complete lights with bracket and seal.

Number plate light, with a black housing and flat mounting base. Suitable for Citroën AK, AZU

ACDY, HY, DS Break, Peugeot Pick Up...

• Suitable for this article
• 
  Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik
  1,76 €

License plate light, with black housing. Suitable for Citroen AK, AZU, ACDY, HY, DS BREAK.

• Suitable for this article
• 
  Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik
  1,76 €

Children's push 2CV (for learning to walk). Approx. 78cm long. Made entirely from wood. Made in the

EU. This cute 2CV is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!

Children's push Renault R4 (for learning to walk). Approx. 78cm long. Made entirely from wood. Made

in the EU. This cute R4 is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!

2CV6, nut for the rocker arm. (Securement). Suitable for Citroen 2CV6. Or.Nr.AM11298

Rocker lever axle check disk, suitable for Citroen 2CV4 + 2CV6. Measurement: 19 x 14,5 x 1mm

Or.Nr. AM124-85

Rocker lever axle fixing bolt (special bolt head). Suitable for Citroen 2CV6, Dyane, Mehari

Dimension: M8x44. Or. No. ZC9622812U

• Suitable for this article
• 
  Tool 1677-T, for the nuts (6x9mm) the rocker arm and at the gearbox (Citroen
  15,77 €

Rocker lever axle spring washer, suitable for Citroen 2CV6. Measurements: 14.9 x 18.8 x 0,23mm.

Rocker lever axle spring washer, suitable for Citroen 2CV6. Measurements: 14.9 x 18.8 x 1,05mm

Or.Nr.ZC9624021U

Rocker arm shaft spring on the left, suitable for 2CV with 12 HP engine. Or.Nr.A 124 16

• Suitable for this article
• 
  Rocker arm shaft spring on the right, suitable for 2CV with 12 HP engine
  4,37 €

Rocker arm shaft spring on the right, suitable for 2CV with 12 HP engine. Or.Nr.A 124 16A

• Suitable for this article
• 
  Rocker arm shaft spring on the left, suitable for 2CV with 12 HP engine
  4,37 €

Toggle switch with polished head. Version: Changeover switch. 3x electrical connection. Load

capacity: 5 amps. Bore diameter: 12.5mm. This switch is a changeover switch. You can therefore switch 2 functions. But of course it can also be used as a normal toggle switch. Then only 2 electrical connections are connected.

Toggle actuator universal. On - Off. Material: Plastic black.

• Suitable for this article

Clip (200 fittings) for the coverings. Suitable for Citroen, Peugeot, Renault. If the seats are

again upholstered, this clip is required. The suitable pliers have our number 18084.

• Suitable for this article
• 
  Hog ring plier for the mounting of coverings (workshop quality). With this
  23,71 €

Hog Rings (500 per pack) for 21048 automatic pliers (coverings). Suitable for Citroen, Peugeot

Renault. The suitable pliers have our number 21048.

Clip for the securement of the coverings at the seat frame. (slide-on clamp with hooks). Suitable

for citroen 2CV, Dyame, Ami, DS, HY.

Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater

cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.

Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version

With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.

Clip for the sill trim (aluminium), suitable for Citroen 2CV. The clip also fits the bumper

mouldings for the 2CV up to 1961, the wide side mouldings for the Citroen DS and the cardboard radiator cowling for the Renault Dauphine. This clip is not as extremely strong as our number 16844, but is particularly suitable for aluminium trims (easier to fit, as aluminium trims are extremely sensitive to pressure).

Clip for the sill trim (stainless steel), suitable for Citroen 2CV. The clip also fits for the trim

strips on the bumper for 2CV up to 1961. For the Citroen DS for the wide side trim strips and for the cardboard radiator cowling for the Renault Dauphine. This clip is extremely sturdy. It is particularly suitable for trim strips made of stainless steel. For aluminium trims, we recommend the softer clip 16831.

Clip for trim, strip screw: 12x20mm. Universal suitable. Thread: M4 x 19mm. Made in Germany.

• Suitable for this article
• 
  Nut M4 galvanized
  0,14 €

Clamp for heating cable, left + right, attachment to the heat exchanger. (narrow + wide clamp)

Includes 1x heating cable clamp + 2x retaining plate for the heating cable. Reproduction. Please note: The clamps have 5.0 mm holes (new version). For Citroën 2CV, Dyane, Mehari. Or. No. AZ124-12 + AM142-12.

Clip heater cable on the left, securement on the heat exchanger. (narrow clip). Reproduction. Note

The clip has 4,5mm hole bore (old version). For Citroen 2CV. Or.Nr. AZ124.12

Clip heater cable on the left, securement on the heat exchanger. (narrow clip). Significant

reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AZ124.12

Clip heater cable on the right, securement on the heat exchanger. (wide clip). Significant

reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AM14212

Clip heater cable on the right, securement on the heat exchanger. (wide clip). Reproduction. Note

The clip has 4,5mm hole (old version). For Citroen 2CV. Or.Nr. AM14212

clear coat 400ml spray can. In case of metallic paint always paint an additional layer of clear

coat on top, this is the only way that the paint is hardening

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Ratchet adapter (enlargement). From 1/4 ratchet to 3/8 socket wrench.

• Suitable for this article
• 
  Ratchet adapter (enlargement). From 3/8 ratchet to 1/2 socket wrench.
  22,71 €

Ratchet adapter (enlargement). From 3/8 ratchet to 1/2 socket wrench.

• Suitable for this article
• 
  Ratchet adapter (enlargement). From 1/4 ratchet to 3/8 socket wrench.
  18,74 €

Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).

Knob from rubber, for the opening mechanism of the Ventilation shutter, suitable for Citroen 2CV

HY, 11CV. With the 2CV of the final years of construction, is the knob also for the headlight vertical adjustment Installed.

Knob for opening mechanism of the Ventilation shutter. Color blue, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color blue (Azul)
  12,84 €

Knob for opening mechanism of the Ventilation shutter. Color cream, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color white. Suitable
  11,81 €

Knob for opening mechanism of the Ventilation shutter. Color grey, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color grey. Suitable
  8,83 €

Knob for opening mechanism of the Ventilation shutter. Color white, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

Knob for opening mechanism of the Ventilation shutter. Color green, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color green. Suitable
  12,84 €

Knob for opening mechanism of the Ventilation shutter. Color orange, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color orange. Suitable
  12,84 €

Knob for opening mechanism of the Ventilation shutter. Color red, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color red. Suitable
  12,84 €

Knob for opening mechanism of the Ventilation shutter. Color black, production from hard plastic

Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.

• Suitable for this article
• 
  Gear shift knob (ball), from synthetic with chrome ring! Color black. Suitable
  8,83 €

Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock

Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.