for Citroën Alle

Lining of the seat console (for 1 seat). Suitable for Citroen DS Cabriolet + DS Pallas (1 Version)

Material: High-grade steel polished.

Latching pin, which is inserted from above into the seat slide. Suitable for Citroen HY. It

prevents the seat frame from slipping out of the seat rail. Or. No. HY841-122

Locking cap down (27mm), in the rear, lower support arm. Suitable for Citroen HY. Or. No. 2480300U

ZD 9480 300 U.

Sealing rubber for the lubrication opening 32-35mm in the cover plate of the hydraulic lines at the

front. Suitable for Citroen DS. This rubber is also suitable for the boot of the Renault 4CV (for the service opening of the steering gear). Or. No. Renault: 5478 816

• Suitable for this article
• 
  Lower cover sheet on the left, for the hydraulic lines (horizontal mounting)
  33,62 €
• 
  Lower cover sheet on the right, for the hydraulic lines (horizontal mounting)
  33,62 €

End cap made of metal (grease cap). This cap is from the inside, on the rear radius arm mounts (for

the wheel bearing). Diameter: 63mm. Suitable for Citroen DS. Or. No. 1D5404563A

End cap rubber. 10mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 14mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 16mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 18mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 21mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 23mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 26mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 8mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

Plug screw for the crankshaft. Suitable for Citroen ID19 + Citroen HY. Thread: M22 x 1.25 x 8. Or

No. DS121-88

Plug, over the 4th cylinder, in the front wall. Suitable for Citroen DS. Diameter: 40mm. Or. No

DS212115A

Reinforcing plate in the box sill on the left. Suitable for Citroen DS sedan. Or. No. D743-87

• Suitable for this article
• 
  Reinforcing plate in the box sill on the right. Suitable for Citroen DS sedan
  316,34 €

Reinforcing plate in the box sill on the right. Suitable for Citroen DS sedan. Or. No. D743-87A

• Suitable for this article
• 
  Reinforcing plate in the box sill on the left. Suitable for Citroen DS sedan
  316,34 €

Reinforcement cross-beam, under the body (in front + center). Suitable for Citroen HY. Total width

about 970mm.

• Suitable for this article
• 
  Floor pan repair sheet metal in the casing body, over-half cross-beam. Suitable
  83,29 €

Preheating hose, from the exhaust elbow to the air filter. Suitable for Citroen DS. Length: 270mm

Diameter: 55mm. Or. No. DX171231A

Preheating hose for the intake manifold (carburetor preliminary heating). Inside diameter: 19/24mm

Suitable for Citroen DS, to year of construction 07/1972 (Solex carburator). Engine: DV. Or. No. DV235-35A

Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS

19 semi-automatic transmission, of year of construction 1966 to 1968. Inside diameter: 16,0mm + 19,0mm. Or. No. DY235-140A

Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS

starting from year of construction 07/1972. Or. No. DX235-140A.

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen DS

to year of construction 09/1960. Inside diameter both sides: about 18,0mm. Overall length about: 270,0mm. Or. No. DS142-125A

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen DS

of year of construction 09/1960 to 1965. Diameter: 15-16mm. Or. No. DF14225

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen DS

of year of construction 1960 to 1965. Inside diameter both sides: about 21,0mm. Overall length about: 270,0mm.

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen

ID19, of year of construction 1966 to 1969. Inside diameter both sides: about 18 - 19mm. Overall length: about 325mm. Or. No. DV235-35

Preheating hose for the auxiliary air slide valve. Connection at the water pump, on the left at the

engine. Suitable for Citroen DS 21 IE, DS 23 IE. Connections both sides: 19 - 20,0mm. Or. No. DX235-135A

Preheating hose, for the cylinder head. Suitable for Citroen DS IE, starting from year of

construction 07/1972. The hose is Installed at the left side of the engine. Or. No. DX235-126A

Jacking support in the rear (per piece, on the left of or on the right suitable). Suitable for

Citroen HY. Or. No. HY623-89

Jacking support in front (per piece, on the left of or on the right suitable). Suitable for Citroen

HY. Or. No. HY623-85

Jacking point sheet metal at the rear left. Suitable for Citroen HY

Jacking point sheet metal rear on the right. Suitable for Citroen HY.

Jacking point sheet metal in front on the left. Suitable for Citroen HY. Or. No. H741-83

Jacking point sheet metal in front on the right. Suitable for Citroen HY. Or. No. H741-83A

Jacking point reinforcing plate centrically. Suitable for Citroen DS. This plate is centric under

the vehicle (on the left + on the right fitting). Made in Germany.

Jacking point reinforcing plate rear. Suitable for Citroen DS. This plate is before the rear wheel

(horizontal). On the left + on the right fitting! Made in Germany.

Jacking point in front on the left. Suitable for Citroen DS. Simple usual quality!

Jacking point in front on the left. Suitable for Citroen DS. New reproduction, very good quality!

Jacking point in front on the right. Suitable for Citroen DS. Simple usual quality!

Jacking point in front on the right. Suitable for Citroen DS. New reproduction, very good quality!

Jacking point pin at the box sill. Suitable for Citroen DS BREAK + Cabriolet! (for the jack

support) (26mm)

Jacking point pin at the box sill. Suitable Citroen DS sedan (for the jack support). (20mm)

Jacking pin cover, from high-grade steel. Suitable for Citroen DS. Or. No. D622-100

Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the

existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.

• Suitable for this article

Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the

existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €
• 
  6-volt electronic flasher relay. Power output from 10 watts to 110 watts
  37,58 €

Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual

indicator-relais. easy to fit.

• Suitable for this article
• 
  Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for
  9,77 €

Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting

The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.

• Suitable for this article
• 
  Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for
  9,77 €
• 
  6-volt electronic flasher relay. Power output from 10 watts to 110 watts
  37,58 €
• 
  Light bulb 12V, 2 Watt for pilot lamp (articles 50056-50059 ), socket BA7's
  1,19 €

Warning switch at the auxiliary air slide valve (for the thermometer), suitable for Citroen DS IE

starting from year of construction 7/1972. Thread: M16. Or.Nr.5428845K

Water temperature display 120°C. Dial in black. Diameter: 52mm. Suitable for Citroen 11CV + 15CV.

• Suitable for this article
• 
  Water temperature sensor for the water temperature indicator. Suitable for
  23,71 €
• 
  Instrument fixture (made of metal) for 2 additional instruments with 52mm
  9,57 €
• 
  Instrument fixture (made of metal) for 1 additional instrument with 52mm
  8,53 €