Roof half left complete, made of sheet metal! Suitable for Citroen HY with standard wheelbase
Shipping only possible by forwarding (relatively expensive). Dimension: 2750 x 950 x 1.0mm.
for Citroën Alle
4601 Articles | Page 16 of 93
Roof half on the left, made of GRP. Suitable for Citroen HY. The roofs have an offset edge, so that
several roofs can be extended. Dimension: 1830mm x 970mm. Or. No. H825-1
Roof half right complete, made of sheet metal! Suitable for Citroen HY with standard wheelbase
Shipping only possible by forwarding (relatively expensive). Dimension: 2750 x 950 x 1.0mm.
Roof half on the right, made of GRP. Suitable for Citroen HY. The roofs have an offset edge, so
that several roofs can be extended. Dimension: 1830mm x 970mm. Or. Nr. H825-1A
Roof skin clamp rear (laterally on the left + on the right). Per piece. Suitable for Citroen DS
sedan. Consisting of Or. No. 1D 5404 020Y + 1D 5403 965A
Roof frame on the left. Very good quality, with the lower reinforcement at the screw holes
Suitable for Citroen DS. Or. No. DX811-3
Roof frame on the right. Very good quality, with the lower reinforcement at the screw holes
Suitable for Citroen DS. Or. No. DX811-4
Roof frame repair sheet metal on the left. Suitable for Citroen DS sedan. At this sheet metal the
chrome-plated roof trim is fastened, and the roof fits there. Length 130cm.
Roof frame repair sheet metal on the right. Suitable for Citroen DS sedan. At this sheet metal the
chrome-plated roof trim is fastened, and the roof fits there. Length 130cm.
Roof frame in front (U-profile). That is the lower profile, at the upper roof frame above the
windshield (for the seal). Suitable for Citroen DS. Or. No. D961-53
Roof frame in front, above the windshield. Very good quality, with the lower reinforcement
Suitable for Citroen DS. Or. No. DX811-91
Roof frame, rubber buffer on the side of the roof frame (roof frame 37838 + 37839). The bumper is
mounted in the reinforcements for the screw connection. Suitable for Citroen DS. This rubber is also mounted in the accelerator pedal as a stop.
Roof frame reinforcement above, inside. Suitable for Citroen DS. Or. No. D961-147
- Suitable for this article
Damming mat set (felt under carpet), suitable for Citroen DS Pallas, starting from year of
construction 1967. These felt mats clogged original under the carpet. Like original.
Damming mat set (felt under carpet), suitable for Citroen DS Pallas, to year of construction 1967
These felt mats clogged original under the carpet. Like original.
Set of damping mats for the engine tunnel, engine side. Suitable for Citroen DS. These mats are a
replacement, for the insulation of the screwed plates in the engine compartment (Or. No. DX833-66 + DX822-267A).
Cap for a brake fluid reservoir from glass. Thread about 44mm. Suitable for Citroen 11CV, 2CV, HY
Panhard, Peugeot 203, 403, 404.
Kunststoff-Teufel® is a highly active and electrolytic cleaning agent. It effortlessly removes the
strongest grease and oil stains, nicotine, soot, burnt-in stains and much more from plastics and other alkali-resistant surfaces. An antistatic and dirt-repellent surface is left on the cleaned surfaces. Kunststoff-Teufel® is the perfect cleaner for household, hobby and business (e.g. ideal for cleaning kitchens, blinds, caravans, garden furniture, tarpaulins, car and truck interiors etc.). 1000ml spray bottle! We ourselves only work with the "Teufelsreiniger" (devil's cleaner). We have only had the best experiences. Made in Germany
Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the
cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.
Sealing sleeve brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also
suitable for other vehicles with 1,25 inch piston (31,75mm).
Sealing sleeve, for a wheel brake cylinder piston (1.1/8 inch = 28,56mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (19,0mm). Suitable for Citroen HY. Also universal
fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (7/8 inch = 22,19mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
Sealing ring (O-ring), for the semi-automatic transmission and above at the steering gear. Suitable
for Citroen DS + Citroen SM. Dimensions: 4,2x8x1,9mm. Or.Nr. 24818009T. Made in Germany.
Sealing ring in the gearbox lid. Suitable for Citroen DS. Dimension: 19.8 x 27 x 3,6mm. Or. No
250,290 09W + ZD9502900U
Sealing ring, for the dip tube, in the LHM Hydraulic reservoirs. Suitable for Citroen DS
Measurements: 37 x 44.5 x 3,6mm. Or. No. 24827009U. This sealing ring was also installed in very early brake callipers (up to year of construction 1960) with 38mm pistons!
Sealing ring, down, for the dip tube, in the LHM Hydraulic reservoir. Suitable for Citroen DS
Measurements: 35 x 40 x 2,5mm. Or. No. 3D 5424 654
Sealing set wheel brake cylinder rear (1.1/8 inch = 28,5mm). Suitable for Citroen HY, starting from
year of construction 1969.
Sealing set wheel brake cylinder rear (7/8 inch = 22,2mm). Suitable for Citroen HY, of year of
construction 1963 to 1968. Renault Estafette, starting from year of construction 1967. Renault R16.
Seal (14mm) under the oval closing sheet at the cylinder head (face). Suitable for Citroen DS, to
year of construction 07/1972. Inside diameter: 42mm. Bore screwed holes: 8,0mm. Or. No. DX112-75
Seal from foam rubber, for the fresh air vents in the engine firewall. Suitable for Citroen DS. Per
piece! Or. No. DX643-283A
Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS, to year of
construction 1965. Or. No. D331-79
Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS. Or. No. DV33179 +
1D5411381J. Made in Germany.
Fuel pump cover gasket. For fuel pumps with round cover. Almost all available fuel pumps of our
catalog are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Measurements about 44 x 36mm. 2mm heavily.
- Suitable for this article
Seal for the cover plate at the cylinder head. Suitable for Citroen 11CV, ID19, DS19, HY
Measurements: 80x71mm. Or.Nr.457469. Made in Germany
Seal for the cover plate at the cylinder head. Suitable for Citroen DS, starting from year of
construction 1968. Or. No. DX11278. Made in Germany.
Seal for the cover plate at the cylinder head. Suitable for Citroen DS19, of year of construction
1959 to 1966, Citroen HY. Or.Nr. DM112-88. Made in Germany.
4601 Articles | Page 16 of 93
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
