for Citroën Alle

U-profile on the right, for the back window (vertically, rear at the C-support). Suitable for

Citroen DS sedan.

• Suitable for this article
• 
  U-profile on the left, for the back window (vertically, rear at the C-support)
  21,72 €

Transmission rod (complete) of the steering movement to the auxiliary headlights. Consisting of

DX541-143A + DX541-161 + DX541-144. Suitable for Citroen DS, starting from year of construction 1967.

Connector nut centrically for drive shaft, Citroen 11CV. With cork seal. Or.Nr.380655 + 380705

Conversion kit for the upper rear flap. Suitable for Citroen HY. This conversion kit contains all

parts, in order to convert the flap on gas pressure shock absorbers. Very practically! Caution, the reinforcement cross-beams in the rear flap must be in a perfect condition.

Conversion traverse for Citroen BREAK, to use a normal rear seat bench from Citroen DS sedan

Reproduction, from a original Citroen part from the sixties!

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Steering arm for linking the tie rods. Suitable for Citroen DS. New parts. Reproduction inclusive

bearing and seal. Note: Original is 46mm diameter Installed, we supplies the set with 47mm. The bearing seat must therefore be extended! Otherwise a repair kit would be useless!

• Suitable for this article
• 
  Steering lever arm: sealing at top + bottom, for the steering lever arm
  14,38 €

Reversing lever steering unit: Plate for the bearing block. Suitable for Citroen DS, to year of

construction 1965. Dimension: 35 x 43 x 10mm. Or. No. 620061

Reversing lever steering unit: Ball for the bearing of the lever. Suitable for Citroen DS, to year

of construction 1965. Diameter: 6,7mm. Or. No. Or. No. 4102S

Steering lever arm: sealing at top + bottom, for the steering lever arm. Dimension: 32 x 47 x 7mm

The sealing ring is suitable for the repair kit steering lever (item 34629).

Seal down + above, for the steering unit reversing lever bearing. Dimension: 32 x 46 x 7mm. Or. No

ZC9612641U + ZC9621608U. Made in Germany.

Seal down, for the steering reversing lever. Suitable for Citroen DS 19, of year of construction

1960 to 1965. Dimension: 28 x 52,5mm. Or. No. DS443-78

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal radiator hose 90° sheet. Inside diameter: 15,0 > 16,0mm. Outside diameter: 25mm. Leg

length 130 + 100mm.

• Suitable for this article
• 
  Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band
  4,07 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Underbody roof edge inside, rear. Suitable for Citroen DS Non Pallas. On this underbody the

material is glued.

Console for a radio in DIN measurements. The console is mounted under the dashboard. Uinversal

fitting, e.g. Citroen 2CV, DS. Dimension cutout for radio: 182 x 53mm. Dimension outside: Height: 76mm. Wide above 250mm (down 220mm). Deep one: 175mm.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Vacuum can Ducellier. Suitable for Ducellier distributor, last version for Citroen 11CV, HY

Peugeot 404 + 504. Original from Ducellier, no reproduction (NOS). Ducellier No. 660333

Vacuum hose (1030mm), before the throttle valve (connection from the rear) and 3 path connector for

auxiliary air slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 1030mm. Or. No. 2D5411135K

Vacuum hose, behind the throttle valve (Connection laterally) and 3 way connector for auxiliary air

slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 608mm. Or. No. DX144-218A

Vacuum hose for the full load switch. Suitable for Citroen DS IE (injection engine). Outside

diameter: 10mm. Inside diameter short side: about 4mm. Inside diameter long side: about 5,5mm. Or. No. DX144243A

Vacuum hose, between throttle valve case and pressure sensor. Suitable for Citroen DS IE. Inside

diameter: 7,0mm. Or. No. DX144-226A

Lower cover sheet on the left, for the hydraulic lines (horizontal mounting). For the wheel housing

in front on the left. Suitable Citroen DS. Or. No. DX434-106.

• Suitable for this article
• 
  Sealing rubber for the lubrication opening 32-35mm in the cover plate of the
  2,96 €
• 
  Lower cover sheet on the right, for the hydraulic lines (horizontal mounting)
  33,62 €

Lower cover sheet on the left, for the hydraulic lines (horizontal mounting). For the wheel housing

in front on the left. Suitable Citroen DS. Or. No. DX434-106. Orignal Citroen, no reproduction. Inclusive Seal and rubber plug.

• Suitable for this article
• 
  Lower cover sheet metal on the right, for the hydraulic lines (horizontal
  20,73 €

Lower cover sheet on the right, for the hydraulic lines (horizontal mounting). For the wheel

housing in front on the right. Suitable Citroen DS. Or. No. DX434-107.

• Suitable for this article
• 
  Sealing rubber for the lubrication opening 32-35mm in the cover plate of the
  2,96 €
• 
  Lower cover sheet on the left, for the hydraulic lines (horizontal mounting)
  33,62 €

Lower cover sheet metal on the right, for the hydraulic lines (horizontal mounting). For the wheel

housing in front on the left. Suitable Citroen DS. Or. No. DX434-107. Orignal Citroen, no reproduction. Inclusive seal and rubber plug.

• Suitable for this article
• 
  Lower cover sheet on the left, for the hydraulic lines (horizontal mounting)
  20,73 €

Washer for the securement from the air filter. Dimension: 9 x 28 x 1mm. Suitable for Citroen 11CV

with D engine. Or. No. 619087

Washer, for the nut of the bumper securement rear. Suitable for Citroen DS sedan. Dimension: 20.5 x

30 x 1,5mm.

• Suitable for this article
• 
  Rubber washer under the washer, for the nut of the bumper fixture rear
  2,13 €
• 
  Nut, for the bumper mounting rear in the wheel housing. Suitable for Citroen
  5,86 €

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cover gasket from cork. Suitable for Citroen 11CV + Citroen HY, to year of construction

09/1963. Dimension: 44.5 x 15cm. Or. No. 451323

Valve cover gasket Diesel, suitable for engine XD88, XDP88-BD, XDP88-BDS. 1949cc. Installed from

year of construction 1963 to 1975. Suitable for Peugeot 404 D, 504 D, J7 Diesel. Citroen HY Diesel. Or. No. 0249.25

Valve cover gasket Indedor Diesel (1816cc). Suitable for Peugeot of 403 + 404 Diesel. Citroen HY

Diesel. Installed from year of construction 1959 to 1966. Or. No. 0249.17

Valve cover gasket, suitable for Citroen DS, starting from year of construction 1965. Citroen HY

petrol, starting from year of construction 1969 (final version). Citroen CX (first version).

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve cover gasket. Suitable for Citroen DS + HY, to year of construction 7/1961. Citroen 11CV

Citroen U23.

Valve cover gasket. Suitable for Citroen DS, of year of construction 7/1961 to 1966. Citroen HY

The seal is flat and has a circulating edge! Or. No. DS132-4A

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

universal valve spring cpmpressor, for the development of the valves + valve springs.

Valve spring set outside + inside (16 fittings). Suitable for Citroen 11CV PERFO + 11D engine

Citroen HY, to year of construction 9/1963. Or. No. 452914. Dimension: 30 x 46,5mm.

Valve guide exhaust, from bronze. Suitable for Citroen DS + CX. Dimension: 9 x 13 x 44,5 mm. Per

piece.

Valve guide inlet + outer valve. Peugeot Diesel XD88 (1948cc) + XD4.90. Suitable for Peugeot 404

504, J7, J9. Citroen HY Diesel. Inside diameter: 8,5mm. Outside diameter: 14,05mm. Length: 54,50mm.

Valve guide inlet, suitable for Citroen DS, starting from year of construction 1965. Dimension

8x13x60,2mm. Or.Nr 1D5412002J