for Citroën Alle

Sliding door guide bow (the clip leads the sliding door in the rails). Suitable for Citroen HY. Or

No. H842-80. Per piece. Made in Germany.

Sliding door rubber stop bar (profile sheet metal, triangular). Suitable for Citroen HY

Vertically, welds behind the sliding door. Or. No. H812-77

Sliding door complete (made of GRP with metal frame). Suitable for Citroen HY (normal height). Made

in EU

Sliding door complete, for raised roof (made of GRP with metal frame). Suitable for Citroen HY

Made in EU

Sliding door repair sheet metal, suitable down + above (external sheet metal). 8 flanges! Suitable

for Citroen HY.

Sliding door rail (horzontal). Suitable for Citroen HY. This rail is like the original, it can be

only mounted, if the roof is removed.

Sliding door rail repair sheet metal (horizontal). Suitable for Citroen HY. This rail do not

corresponds to the original, but it can be welded, without dismantling the roof. Length 1480mm.

Rail down (pre-mounted), at the sliding door. Suitable for Citroen HY.

Sliding door and rear flap reinforcement cross-beams (inside). Suitable for Citroen HY.

Sliding door profile in front (stop sliding door). Length: 50cm. Suitable for Citroen HY.

Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you

can easily produce bent water hoses. Simple and ingenious!

Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you

can easily produce bent water hoses. Simple and ingenious!

Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you

can easily produce bent water hoses. Simple and ingenious!

Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you

can easily produce bent water hoses. Simple and ingenious!

Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you

can easily produce bent water hoses. Simple and ingenious!

Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 120-140mm

hose clamp for 15-20mm.

hose clamp for 40-60mm.

Hose clamp gasoline line 8-12mm. Produced from high-grade steel!

Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.

• Suitable for this article
• 
  Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band
  3,67 €
• 
  Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
  3,62 €
• 
  Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band
  3,87 €
• 
  Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band
  4,07 €
• 
  Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band
  4,12 €
• 
  Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band
  4,26 €
• 
  Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band
  4,56 €
• 
  Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band
  4,71 €
• 
  Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band
  4,76 €
• 
  Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band
  5,81 €

Lock cylinder for the tailgate. Original Citroen, no replica. Or. No. H863 35

Lockcylinder case (mounting for the lock), in the front door. Suitable for Citroen DS, starting

from year of construction 1971. Or. No. 5404108E.

• Suitable for this article
• 
  Lockcylinder set, suitable for Citroen DS, starting from year of construction
  30,64 €
• 
  Safety sheet, for the lock cylinder (door). Suitable for Citroen DS, starting
  3,87 €

Lockcylinder set for 2 doors + 1x starter lock, 1x trunk lock, for Citroen 11CV, of year of

construction 1952-57.

Lockcylinder set for 2 doors + 1x starter lock, for Citroen 11CV, from year of construction 1952-57.

Lockcylinder set, suitable for Citroen DS, starting from year of construction 1972. Consisting of

3 x lockcylinder (doors + luggage compartment). 2 keys. 2 lockcylinders have down an angular pin. Or. No. 5404295M.

• Suitable for this article
• 
  Lockcylinder case (mounting for the lock), in the front door. Suitable for
  31,63 €

Lockcylinder set, suitable for Citroen DS, from year of construction 2/1969 to 1971 + AMI6

Consisting of: 3 x lockcylinder (doors + luggage compartment). 2 keys. The lockcylinders have down a round pin. Diameter: 12mm. Length over everything: 34mm. Or. No. DX861-13B

• Suitable for this article
• 
  Push-button (application for the lockcylinder), for the door handles (of year
  39,57 €
• 
  Fixing clip, for the securement of the lockcylinder in the locking pivot
  1,57 €

Lockcylinder set, suitable for Citroen HY. Consisting of: 2x lockcylinder doors driver's cabin. 1x

lockcylinder for starter lock. 1x lockcylinder rear flap.

Striker plate distance plate. Heavy one: 1,0mm. Suitable for Citroen DS. This plate is mounted

behind the striker plate.

Striker plate distance plate. Heavy one: 2,0mm. Suitable for Citroen DS. This plate is mounted

behind the striker plate. Or. No. D861-158

Striker plate distance plate. Heavy one: 3,0mm. Suitable for Citroen DS. This plate is mounted

behind the striker plate. Or. No. D861-158A

Striker plate distance plate. Heavy one: 4,0mm. Suitable for Citroen DS. This plate is mounted

behind the striker plate. Or. No. D861-158B

Striker plate on the left, chrom-plated. Suitable for Citroen DS, up to year of construction 1971

(2x required). Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79B

• Suitable for this article
• 
  Striker plate on the right, chrom-plated. Suitable for Citroen DS, up to year
  44,53 €
• 
  Screw (countersunk head) M7, chrom-plated, for the striker plate. Suitable for
  2,49 €
• 
  Striker plate underlay. Special coarse seal, so that the striker plate cannot
  1,76 €

Striker plate on the left. Suitable for Citroen DS, up to year of construction 1971 (2x required)

Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79B

• Suitable for this article
• 
  Striker plate on the right. Suitable for Citroen DS, up to year of construction
  38,58 €
• 
  Screw (countersunk head) M7, aluminum, for the striker plate. Suitable for
  2,29 €
• 
  Striker plate underlay. Special coarse seal, so that the striker plate cannot
  1,76 €

Striker plate on the right, chrom-plated. Suitable for Citroen DS, up to year of construction 1971

(2x required). Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79C

• Suitable for this article
• 
  Striker plate on the left, chrom-plated. Suitable for Citroen DS, up to year of
  44,53 €
• 
  Screw (countersunk head) M7, chrom-plated, for the striker plate. Suitable for
  2,49 €
• 
  Striker plate underlay. Special coarse seal, so that the striker plate cannot
  1,76 €

Striker plate on the right. Suitable for Citroen DS, up to year of construction 1971 (2x required)

Citroen HY, starting from year of construction 1968 (1x required). Or. No. D861-79C

• Suitable for this article
• 
  Striker plate on the left. Suitable for Citroen DS, up to year of construction
  38,58 €
• 
  Screw (countersunk head) M7, aluminum, for the striker plate. Suitable for
  2,29 €
• 
  Striker plate underlay. Special coarse seal, so that the striker plate cannot
  1,76 €

Striker plate underlay. Special coarse seal, so that the striker plate cannot slip (anti-slide)

Suitable for Citroen DS, to year of construction 1971. Citroen HY, starting from year of construction 1968.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.