Trim set for Citroen DS Cabrio. Consisting of: Trim top, center + bottom. Turn signal Cabrio
complete left + right. Stone guards, corners fenders rear. Cover trim rear. Reflector.
for Citroën Alle
4594 Articles | Page 91 of 92
Trim set for the doors (4 fittings). Suitable for Citroen 11CV BL + 15CV. The trim are produced
from aluminum. Or. No. 802942
Centre trim set (wide version, with white rubber). Suitable for Citroen DS Non Pallas (8 trims). At
the request of many customers, the trims have been modified so that they can be glued better. This eliminates the need for fixing holes in the vehicle. A very good adhesive is our number 21058 from 3M. Of course, it is also possible to mount the trims with a clamp, but then holes have to be drilled in the back of the trims.
Centre trim set (wide version, with white rubber). Suitable for Citroen DS Break (8 trims). At the
request of many customers, the trims have been modified so that they can be glued better. This eliminates the need for fixing holes in the vehicle. A very good adhesive is our number 21058 from 3M. Of course, it is also possible to mount the trims with a clamp, but then holes have to be drilled in the back of the trims.
Centre trim set (wide version, with white rubber). Suitable for Citroen DS Pallas (8 trims). At the
request of many customers, the trims have been modified so that they can be glued better. This eliminates the need for fixing holes in the vehicle. A very good adhesive is our number 21058 from 3M. Of course, it is also possible to mount the trims with a clamp, but then holes have to be drilled in the back of the trims.
Trim set above at the doors. Material: High-grade steel. Consisting of 6 strips (2x door in front
2x door rear, 2x of rear fenders). Suitable for Citroen DS + DS Pallas. The trim is produced from high-grade steel, like original. Or. No. DX854-126 door in front (828mm). DX854-126A door rear (880mm). DX854-126 fender rear (318mm).
Trim set, above + down. Material. High-grade steel polished. Consisting of 14 trim`s (2x fender in
front down, 4x door in front above and down, 4x door rear above and down, 4x fender rear above and down). Suitable for Citroen DS Pallas. The trim`s are from high-grade steel! Like Original. Or. No. DX854-126 door in front above, DX854-131 + DX854-131A door in front down. DX854-126A door rear above. DX854-132 + DX854-132A door rear down. DX854-127 fender rear above, DX854-130B + DX854-130C fender rear down, DX854-129 + DX854-129A fender in front down.
Knob "D" for starter motor Bowden cable. Suitable for Citroen 11CV, 15CV, 2CV old, HY. The handle
is oval and from aluminum.
Round pull switch for the windscreen wipers, a reproduction of the original switches from the
1970s! 2CV models from the years of construction 1962 to 1974, Citroën DS, HY
Ignition cable fixture set. Consisting of the fixture (for 4 cables) above the ignition coil +
fixture (2 cables) suitable for cylinder No. 3 + 4, for Citroen DS, Citroen HY, Citroen GS. Or. No. GX0610801A + DX212-286A
Ignition cable holder. Suitable for Citroen DS + Citroen HY. This holder is screwed on the valve
cover. (at the fixing screws of the valve cover)
Ignition cable set, suitable for Citroen 11CV. Citroen HY, up to model year 1963. Or. No. 715024
Caution: These ignition cables are high-resistance and can only be used with low-resistance spark plugs (so no spark plugs with an R in the designation. R = cadio-control = high resistance).
Ignition cable set, suitable for Citroen DS (carburetor engine, starting from year of construction
1965) + Citroen HY, with in front mounted distributor. The ignition cable set is delivered with suitable spark plug sockets. Made in EU.
Ignition cable set, suitable for Citroen DS IE (injection engine) and DS carburetor, to year of
construction 1965 (engines with 3 crankshaft bearings, rear mounted distributor). The ignition cable set is supplied with suitable spark plug sockets. Made in France.
Spark plug electrodes extension. Suitable for Peugeot 403, 404, 504, J7. Renault R16. The extension
fits also on Citroen DS + HY. With Citroen DS can be, that the rubber protection from the ignition cable, must cut off a little bit. It can be, that you must change the hole from the spark plug locking cap to 10mm. Normally no changes are necessary. Just opposite DS, the extensions from the Peugeot method is an significant improvement, because the electrode is fully insulating!
Spark plug isolation pipe. Material such as original (PF CP 21). Suitable for Citroen DS, HY, CX
Dimension: 13 x 15 x 105mm. Or. No. DX212-77. Made in Germany
Spark plug NGK BP6 HS. Suitable for all Citroen DS models, Citroen HY, Citroën Traction 11cv and
15six. Short thread. Thread: M14 x 1.25 x 10mm. Wrench 21mm.
Spark plug NGK BP6ES. Suitable for Citroen GSA, Citroen SM IE. Peugeot 505. Renault R16, R17, R18
Thread M14x1,25. Wrench: 21mm. Length of thread: 19mm. For the mounting from a electrode extension.
Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap
of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!
Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs
where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.
Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool
installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug wrench (adjustable in length), for 20,8mm spark plugs. This key is perfect for the
Citroen DS. It can be used with the normal electrode extension. Fitting for 3/8 inch ratchet (medium size). Fits of course also on all other spark plugs, for 21mm tools. Manufacturer: HAZET. Adjustable length from: 137,5mm to 157,5mm and 195,5mm. With spark plug holding rubber.
Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS
Peugeot 203, 403, 404, 504. Workshop quality!
Starter lock (like original). Suitable for Citroen 11CV/15CV, starting from year of construction
06/1952. Or. No. 723221
Starter lock blank key. Suitable for Citroen Acadiane from year of construction 1978 to 1987. Dyane
from 1967 to 1979. Citroen SM. AMI6 from 1961 to 1969. AMI8 from 1969 to 1979. CX from 1981 to 1984. GS starting from 1970. For starter lock manufacturers: VACHETTE. Please note the cross section of the key bit. Shaft length: 32,80mm. Shaft width: 7,6mm.
Ignition lock key blank. Suitable for Citroen DS, up to year of construction 1974. For starter lock
manufacturers: NEIMAN + VACHETTE. Please note the cross section of the key bit. Shaft length: 32,80mm. Shaft width: 7,6mm.
Starter lock blank key. Suitable for Citroen DS, up to year of construction 1974. For starter lock
manufacturers: NEIMAN, SIMPLEX. Please observe the cross section of the key bit. Shaft length: 32,8mm. Shaft width: 7,6mm.
Starter lock blank key. Suitable for Citroen Dyane, from 1967 to 1979. Acadiane of year of
construction 1978 to 1987. Citroen DS old dashboard, with steering wheel lock under the steering column. For starter lock manufacturers: NEIMAN, SIMPLEX.
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 2 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 4 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Starter lock in the dashboard. Suitable for Citroen 2CV + HY. Inclusive 2 keys. The lock has 2x
mounting thread M5 x 0.80 (ISO standard metrically). In the old Citroen is often M5 x 0.75 installed. Use please 2 suitable screws!
Ignition lock key blank, suitable for Citroen 2CV, DS, HY. (small version, ignition key has the
size of door keys, for vehicles with starter button). Shaft length: 17,3mm. Shaft width: 7,0mm.
Starter lock, for semiautomatic gearbox. Plug with 6 connections. Suitable for Citroen DS, starting
from year of construction 1969. Or. No. 5412878F + 5426551A. New part!
4594 Articles | Page 91 of 92
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
