Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroen
2CV + Citroen DS. Or. Nr. A 5185
for Citroën Alle
4594 Articles | Page 12 of 92
Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV +
Citroen DS. Or.Nr. ZC9438157U
Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring
plates that are mounted on the side of the brake shoes (e.g. our item number 13054).
Brake shoes rear (4 fittings, for both sides). Suitable for Citroen DS sedan! Installed from year
of construction 1955 to 1975. Diameter: 255mm. Lining-width: 36mm. Or. No. DS451-016A
Brake shoes rear (4 fittings, for both sides). Suitable for Citroen DS Break! Installed from year
of construction 1955 to 1975. Lining-width: 46mm. Or. No. DF451-016A
Brake shoes set in front (new parts). Suitable for Citroen HY, to year of construction 02/1962
Wide one: 45mm. Note: New parts, an old part return is not necessary! Made one in European Union. Or. No. HY451-018
Brake shoes set in front (new parts). Suitable for Citroen HY, starting from year of construction
02/1962. Width: 55mm. Note: New parts, an old part return is not necessary! Made in European Union. Or. No. HY451-018A
Brake shoe linings (rear suitable), to rivet. Suitable for Citroen 11CV. Installed at the front
axle to year of construction 1938. Installed at the rear axle until 1957. 1 set is for 1 axle. Consisting of: 2x lining 227mm + 2x lining 145mm. Or. No. 438016A
Brake shoe linings in front, to rivet. Suitable for Citroen 11CV, with 12 inch drum (304,8mm). (1
set = suitable for 1 axle). Or. No. 438016
Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with
drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83
Brake actuator (in pedal bracket) for "champion" brake button (only the slider). Suitable for
Citroen DS, hydraulic system LHM. The slider is mounted in the pedal block. Or. No. DXN453-021 (1D 5410496P). In exchange. Plus 150 Euro old part deposit.
Brake operation (hydraulic brake control) for mushroom brake button. Suitable for Citroen DS
Hydraulic system LHM. The complete block is supplied. It was reconditioned with new, calibrated pistons. The pedal adjustment for the rear wheel brake, was adjusted after factory regulations. Inclusive 12 ring seals for the bank of tubes. Plus 250 Euro Old part deposit.
Brake system accumulator, 2 connection. In the exchange. Hydraulic system LHM. Suitable for Citroen
DS carburetor. You require the following hydraulic line seals for mounting: 1x 32277 + 2x 33160. Or. No. 3D5409777. Plus 400 Euro Old part deposit.
Brake system accumulator, 2 connection. In the exchange. Hydraulic system LHS. Suitable for Citroen
DS, to year of construction 1965. Or. No. DF392-04. Plus 400 Euro Old part deposit.
Brake system accumulator, 3 connection. In the exchange. Hydraulic system LHM. Suitable for Citroen
DS IE + Citroen SM. You require the following hydraulic line seals for mounting: 1x 32277 + 2x 33160. Or. No. 3D5415541B. Plus 400 Euro Old part deposit.
Brake system accumulator, 3 connections. In exchange. Hydraulic system LHS. Suitable for Citroen
DS, up to year of construction 1965. Or. No. D392-02. Plus 400 Euro Old part deposit.
Brake bleed screw seal (O-ring). Hydraulic system LHM. Suitable for Citroen DS + Citroen SM
Dimension: 3.4 x 7.2 x 1,9mm. Or. No. 24828009N. Made in Germany.
Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV
and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bore
10mm. Tool mounting: 24mm. These cams can be used also for Citroen DS, the bore must be changed to 12mm!
Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction
1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid reservoir from glass. Glass height: about 115mm. Inclusive fixture from high-grade
e steel. Suitable for Citroen 11CV + Citroen HY.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 6.0mm. This system of the securement was used by many france classic car`s. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 8.0mm. This system of the securement was used with many französichen car. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake pads in front, suitable for Citroen DS, starting from year of construction 1965. Citroen SM
all years of construction. High quality. Fits very good in the brake calipers. The brake pads have like original, cooling radiators on the rear side! Or. No. DX451-32A. Made in Europe! The manufacturer in Italy has stopped the production of these branded brake pads.
Brake power controller, spring set. Suitable for Citroen HY, starting from year of construction
9/1966. Consisting of 3 springs. Or. No. HY456-291A, HY456-96, HY456-95.
Brake power distributor sealing set. Suitable for Citroen DS Berline (except from version DT
D-Super + DV D-Speciale) + DS BREAK. Citroen SM
Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings
A brake pipe flaring machine is not necessary. Or. No. 1D5426236B
Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!
Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!
Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
4594 Articles | Page 12 of 92
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
