Spring for the headlight tie bar (vertical adjustment of the main headlights). Suitable for Citroen
DS. Diameter: 20mm. Length: 85mm. Or. No. 1D5413307U
for Citroën Alle
4594 Articles | Page 24 of 92
Spring largely, for clutch release sleeve. Suitable for DS, starting from year of construction
07/1972. Or. No. 5411216R
Spring largely, for clutch release sleeve. Suitable for Citroen DS, to year of construction
07/1972. Or. No. 2D5411216R
Clutch release sleeve, spring for the clutch release sleeve. Suitable for Citroen DS, of year of
construction 1968 to 1969. (3 finger, lever clutch). Or. No. D31477
Spring, for the clutch release fork lever. Suitable for Citroen DS, of year of construction 1970 to
1971. 25 turns. Diameter: 19,0mm. Overall length: 67mm. Or. No. 1D5417790X
Spring, for mounting under the Rosette of the window crank, and - or, door handle. Diameter: 40mm
Suitable for Citroen 11CV. In addition, this spring can be universal used. (Peugeot, Renault, Citroen) Or. No.133841
Cushion frame for one seat in front. Suitable for Citroen DS, up to year of construction 09/1968
Only fitting for the seat pillow, not for the backrest. On the left or on the right fitting. Per piece. Made in Germany.
Spring clip for headlamp vertical adjustment on the right. Suitable for Citroen DS, starting from
year of construction 1967 (new front). Or. No. DX541-51A
Valve for brake pressure accumulator + split sphere (suspension ball) (LHM + LHS). Suitable for
Citroen DS. This valve serves as a replacement for defective valves or for refilling (if you can still find a Citroen workshop that can do this!). The valves are only screwed in!
Sphere (suspension ball) sealing ring (small), for hydraulic system LHS. Suitable for Citroen DS
Dimension: 36 x 40 x 3,7mm.
Sphere (suspension ball) sealing ring, for hydraulic system LHM. Suitable for Citroen DS, BX, XM
GS, CX. Or. No. 42821009B
Sphere (suspension ball) sealing ring, for hydraulic system LHS. Suitable for Citroen DS
Dimension: 38x43mm. Or. No. D43390
Sphere rear (suspension ball), screwed. Hydraulic system LHM. In the exchange. Suitable for Citroen
DS Break. 700ccm. 37 bar. Plus 100 Euro Old part deposit. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
PDF FILE Sphere rear (suspension ball), screwed. Hydraulic system LHM. In the exchange. Suitable for Citroen
DS. 700ccm. 26 bar. Plus 100 Euro Old part deposit. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
Sphere rear (suspension ball), screwed. Hydraulic system LHS. In the exchange. Suitable for Citroen
DS Break. 700ccm. 37 bar. Plus 100 Euro Old part deposit. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
- Suitable for this article
Sphere rear (suspension ball), screwed. Hydraulic system LHS. In the exchange. Suitable for Citroen
DS. 700ccm. 26 bar. Plus 100 Euro Old part deposit. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
- Suitable for this article
Sphere rear (suspension ball), welded. Hydraulic system LHM. Reproduction - new part. Suitable for
Citroen DS BREAK, starting from year of construction 11/1974. 40 bar.
Sphere rear (suspension ball), welded. Hydraulic system LHM. Reproduction - new part. Suitable for
Citroen DS BREAK, up to year of construction 11/1974. Citroen DS sedan, Installed starting from year of construction 11/1974. 37 bar.
Diaphragm, for screwed sphere (suspension ball). Hydraulic system LHS. Suitable for Citroen DS
Made in Germany. Important information: Tyre mounting grease is best for mounting! Never allow the membranes to come into contact with mineral oils or greases!
Front sphère LHS (suspension ball), divisible. With hexagon at the screw connection. Hydraulic
system LHS. In exchange. Consisting of Or. No. DS433-01C (only the ball) + screw-in valve hexagon DS436-98. Suitable for Citroen DS. 700cc. The LHS sphére with or without a hexagon (32573) are compatible with each other. Plus 100 euros deposit for used part. Citroen did change the sphère at some point: first they had a hexagon, then at the end of the 1950s they changed to a connection without a hexagon, and from around 04/1963 they changed back to the hexagon. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
- Suitable for this article
Front LHS sphère (suspension ball). Without a hexagon at the screw connection. Hydraulic system
LHS. In exchange. Suitable for Citroen DS. 700cc. The LHS sphères with hexagon (32114) or without hexagon are compatible with each other. Plus 100 euro old part deposit. Citroen changed the sphère at one point: first they had a hexagon, then at the end of the 1950s they changed to a connection without a hexagon, and from around 04/1963 they changed back to the hexagon. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
Sphere in front (suspension ball), screwed. Hydraulic system LHM. In the exchange. Suitable for
Citroen DS. 700ccm. 59 bar. Plus 100 Euro Old part deposit. Please note: If you return the old part, we also need a split sphére. They must therefore be visually identical, with the thick bulge in the centre. If you return a normal one-piece sphére, we cannot refund the deposit.
Sphere (suspension ball) in front, welds. Hydraulic system LHM. Reproduction. Suitable for Citroen
DS Ambulance, starting from year of construction 04/1973. 40 bar.
Sphere in front (suspension ball), welded. Hydraulic system LHM. Reproduction. Suitable for Citroen
DS sedan + BREAK, up to year of construction 11/1974. 59 bar.
Sphere in front (suspension ball), welded. Hydraulic system LHM. Reproduction. Suitable for Citroen
DS, starting from year of construction 11/1974. 75 bar.
R-Clip Assortment, 150 pcs. 6 popular sizes, 2.4 x 31 mm, 2.0 x 33 mm, 2.0 x 40 mm, 2.8 x 42 mm
3.5 x 45 mm, 4.0 x 75 mm.
Ball joint socket (ball cup rear axle) collar, suitable for Citroen DS + Citroen SM. HY with
hydraulic rear axle. Or. No. D43481 + 3D5412331K
Ball joint socket (ball cup) retaining clamp. Suitable for Citroen DS + Citroen SM. HY with
hydraulic rear axle. Diameter hook: 3mm. Or. No. D434-80
Ball joint socket (ball cup) collar, protection ring (fixture ring from rubber). Suitable for
Citroen DS. Or. No. D43463
Ball joint socket (ball cup) repair set. Suitable for Citroen DS, starting from year of
construction 1965. HY with hydraulic rear axle. Consisting of: 1x ball, 1x sealing sleeve, 1x retaining clip.
Ball joint socket ball, rear. Suitable for Citroen DS, starting from year of construction 1965 +
Citroen SM. HY with hydraulic rear axle. Diameter: 15,87mm. Or. No. ZD9410800U
Suspension cylinder - ball joint socket repair set big, for the rear axle. Suitable for Citroen DS
Consisting of: Ball joint socket ball cup, ball for ball joint socket, clip ball joint socket, collar ball joint socket, rubber ring suspension cylinder collar, retaining strap suspension cylinder collar, piston rod suspension cylinder, Suspension cylinder collar, sealing set suspension cylinder, retaining plate suspension cylinder.
Suspension cylinder - ball joint socket repair set small, for the rear axle. Suitable for Citroen
DS. Consisting of: Ball joint socket ball cup, ball for ball joint socket, clip ball joint socket, collar ball joint socket, rubber ring suspension cylinder collar, retaining strap suspension cylinder collar, piston rod suspension cylinder.
Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS BREAK, starting from
year of construction 10/1972. Or. No. 3D5410538W.
Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS BREAK, to year of
construction 10/1972. Or. No. DVF434-120.
Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS, starting from year
of construction 05/1972. Citroen SM. Or. No. 3D5410536
Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS, of year of
construction 1955 to 05/1972. Citroen SM. Or. No. DX434-111
Suspension cylinder retaining plate rear. Suitable for Citroen DS. Dimension: 32 x 17,5mm. Or. No
D43467 + 3D5412335D. Made in Germany.
4594 Articles | Page 24 of 92
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
