Protection rubber for hydraulic return hose. Suitable for Citroen DS. Dimension of the protection
rubber: - Inside diameters: 15mm. Outside diameter: 20mm. Height: 16mm. Or. No. 26208079Z
for Citroën Alle
4594 Articles | Page 69 of 92
Protection rubber for the hydraulic hose (suction hose), from hydraulic reservoir to the hydraulic
pump. Suitable for Citroen DS. Dimension of the protection rubber: - Inside diameters: 19mm. Outside diameter: 24mm. Height: 16mm. The rubber is the underlay for the securing clip. Or. No. 26208089H + DM45382A
Box sill - longitudinal chassis beam lining set from linoleum (grey - gris marbrée). Suitable for
Citroen ID + ID Break, starting from year of construction 1962.
Box sill - longitudinal chassis beam lining set from linoleum. lour gris (marbré). Suitable for
Citroen DS Non Pallas, starting from year of construction 1967. The linoleum has an additional pad mat.
Box sill (longitudinal chassis beam) lining set from linoleum. Suitable for Citroen DS, up to year
of construction 09/1961.
Box sill - side beam lining set. Suitable for Citroen DS from year of construction 10/1961 to 1966
Grey (marbré) with small black points.
Sill - Trim strip on top of the sill. The trim strip is also the border of the carpet on the sill
1 set (left + right). Length approx. 140cm. Or. No. DS981-161 + DS981-162. This trim is absolutely necessary if you want to convert a DS to a DS Pallas.
Covering for the box sills outside. Aluminum look. Suitable for Citroen DS Non Pallas. 4 pieces
External surface of the box sills, if the door is opened!
Box sill entry plate, rear left (with 2 brackets). Suitable for Citroen DS. This is the outer plate
you hit with your foot when you get into the car. Good reproduction.
PDF FILE Box sill entry plate, rear left (with 2 brackets). Suitable for Citroen DS. This is the outer plate
you hit with your foot when you get into the car. Simple reproduction.
Box sill,entrance sheet metal, rear right (with 2 brackets). Suitable for Citroen DS. This is the
outer plate you hit with your foot when you get into the car. Good reproduction
Box sill,entrance sheet metal, rear right. Suitable for Citroen DS. This is the outer plate, which
you hit with your foot when you get into the car. Simple reproduction. Made in Europe.
Box sill external sheet metal on the left, between A + B-support (with cutout for the jack
support). Suitable for Citroen DS. Good reproduction
Box sill, entry plate, front left. Suitable for Citroen DS. This is the outer sheet, which you like
to get your foot on when getting in. Simple reproduction. Made in Europe.
Box sill external sheet metal on the right, between A + B-support (with cutout for the jack
support). Suitable for Citroen DS. Good reproduction
Box sill, entry plate, front right. Suitable for Citroen DS. This is the outer sheet, which you
like to get your foot on when getting in. Simple reproduction. Made in Europe.
Box sill foam rubber seal (U-profile). This rubber, seals the attached closing sheets, from
downside at the box sill. Suitable for Citroen DS. Length: 3816mm. Or. No. D743-91
Sill repair inner panel left. This plate is the complete standing plate of the sill. The bottom
edge is welded to the floor panel (the holes in the panel are for spot welding). Suitable for Citroen DS Break + Convertible (the sheet metal is thicker than that of the saloon).
Box sill repair interior sheet metal on the left. This sheet metal is the complete web plate of the
box sill. At the bottom edge the floor pan is welded (the holes in the sheet metal are for the spot welding). Suitable for Citroen DS sedan.
Sill repair inner panel right. This plate is the complete standing plate of the sill. The bottom
edge is welded to the floor panel (the holes in the panel are for spot welding). Suitable for Citroen DS Break + Convertible (the sheet metal is thicker than that of the saloon).
Box sill repair interior sheet metal on the right. This sheet metal is the complete web plate of
the box sill. At the bottom edge the floor pan is welded (the holes in the sheet metal are for the spot welding). Suitable for Citroen DS sedan.
Box sill repair sheet metal on the right in front, between A-post and front axle mounting. Suitable
for Citroen 11CV + 15CV.
Sill guard fastening clips (2 pieces). For the trim panel inside left, on the sill (at the parking
brake). Suitable for Citroen DS Pallas.
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK + DS
Cabrio. Reproduction from brushed high-grade steel.
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK + DS
Cabrio. Reproduction from polished high-grade steel.
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK
Reproduction from aluminum (grooved, like original).
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS sedan
Reproduction from aluminum (grooved, like original). Or. No. DS85362D
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS Pallas sedan
Reproduction from brushed high-grade steel. Or. No. DS85362B. Made in Germany.
Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS Pallas sedan
Reproduction from polished high-grade steel. Or. No. DS85362C. Made in Germany.
Box sill lining (protection) for the door entry. Suitable for Citroen 11CV BN + 15CV. Complete set
for all 4 doors. Or. No. 804050
Box sill closing sheet, at the rear left (for the grommet of the hydraulic lines). Suitable for
Citroen DS. Or. No. DS743-77
Box sill closing sheet, at the rear right (for the grommet of the hydraulic lines). Suitable for
Citroen DS. Or. No. DS743-77A
Box sill closing sheet, from downside. Suitable for Citroen DS. This sheet metal is screwed on the
bottom surface to the box sill. Per piece. Simple reproduction. Made in Europe.
Box sill closing sheet, from downside. Suitable for Citroen DS. This sheet metal is screwed on the
bottom surface to the box sill. Per piece. Very good reproduction from 0,5mmm zinc coated sheet. Optically like original. Length: 954mm. Or. No. DM743-98.
Box sill closing sheet, from downside. Suitable for Citroen DS. This sheet metal is screwed on the
bottom surface to the box sill. Per piece. Very good reproduction from stainless steel. Optical like original. Length: 954mm. Or. No. DM743-98.
Box sill lining set outside, laterally, from stainless steel. Suitable for Citroen DS Pallas. Set 4
fittings, optical like original!
Box sill lining set inside - above, from high-grade steel. Suitable for Citroen DS Pallas. Set 4
fittings, optically like original!
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
4594 Articles | Page 69 of 92
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
