Cap on the valve cap, for filling in engine oil. The cap is supplied with seal + holding rope
Suitable for Citroen DS + Citroen HY.
Cylinder head for Citroën Alle
98 Articles | Page 2 of 2
Rubber cap oil exhausting suitable for the valve cap (crank house exhausting), for Citroen HY + DS
early years of construction. Or. No. DS132-48
Oil exhausting rubber cap, for the valve cap. Suitable for Citroen DS, HY, CX. Inside diameter
40mm. Inside diameter crank house exhausting: 7,0mm.
P 403, seal from cork, at the cylinder head. Suitable for Peugeot 403 Diesel + Citroen HY. Engine
TMD + XDP85. Or. No. 0147.04
Ring seal under that bearing block from the inlet rocker arm shaft. Suitable for Citroen DS +
Citroen HY. Dimension: Measurements: 8.9 x 14.3 x 2,7mm. Made in Germany.
Screw for the securement of the cylinder head, on the exhaust side (short screw). Suitable for
Citroen DS. Dimension: M10 x 114,5mm. Or. No. DX1124
Screw for the securement of the cylinder head, on the inlet side (long screw). Suitable for Citroen
DS. Dimension: M10 x 160mm. Or. No. N1124A
Safety sheet, for the rocker arm block. Suitable for Citroen 11CV. Citroen HY, to year of
construction 9/1963. Or. No. 463015
SM, exhaust valve with 8mm shank! Spare type. Note: In order to be able to mount the valve, a new
valve guide must be pressed in. Our number 30340. The spare valve is a mass production product of best quality!
SM, stud bolt (per piece), connection cylinder head - engine block. Suitable for Citroen SM
Length: 66,0mm. Female thread: M12 x 1,25. Male thread: M14 x 2,0. Or. No. 0S 5405 649E, S114-192A. Made one in European Union.
SM, valve guide for change on 8mm shank for exhaust valve. Suitable for Citroen SM. The guide must
be pressed in and be rubbed then on measurement. It is supplied with 7,85mm shank diameter! Or.Nr. 5425185C.
Temperature switch at the cylinder head, for the red warning lamp in the dashboard. Suitable for
Citroen DS. Or. No. 5414426G
Valve cover gasket from cork. Suitable for Citroen 11CV + Citroen HY, to year of construction
09/1963. Dimension: 44.5 x 15cm. Or. No. 451323
Valve cover gasket Diesel, suitable for engine XD88, XDP88-BD, XDP88-BDS. 1949cc. Installed from
year of construction 1963 to 1975. Suitable for Peugeot 404 D, 504 D, J7 Diesel. Citroen HY Diesel. Or. No. 0249.25
Valve cover gasket Indedor Diesel (1816cc). Suitable for Peugeot of 403 + 404 Diesel. Citroen HY
Diesel. Installed from year of construction 1959 to 1966. Or. No. 0249.17
Valve cover gasket, suitable for Citroen DS, starting from year of construction 1965. Citroen HY
petrol, starting from year of construction 1969 (final version). Citroen CX (first version).
Valve cover gasket. Suitable for Citroen DS, of year of construction 7/1961 to 1966. Citroen HY
The seal is flat and has a circulating edge! Or. No. DS132-4A
Valve spring set outside + inside (16 fittings). Suitable for Citroen 11CV PERFO + 11D engine
Citroen HY, to year of construction 9/1963. Or. No. 452914. Dimension: 30 x 46,5mm.
Valve guide inlet + outer valve. Peugeot Diesel XD88 (1948cc) + XD4.90. Suitable for Peugeot 404
504, J7, J9. Citroen HY Diesel. Inside diameter: 8,5mm. Outside diameter: 14,05mm. Length: 54,50mm.
Valve guide inlet, suitable for Citroen DS, starting from year of construction 1965. Dimension
8x13x60,2mm. Or.Nr 1D5412002J
Valve guide, for the inlet + the exhaust valve. Suitable for Citroen 11CV + Citroen HY. Dimension
13 x 55 x 9mm. Or. No. 457358
Valve spring cotter for the inlet valve (per piece). Suitable for Citroen DS + DS21 (engine DX), of
year of construction 1965 to 05/1967. Or. No. A124-18
Valve spring cotter, befitting for Citroen DS, starting from year of construction 1968. The valve
stem has 3 grooves. Suitable for inlet + exhaust valve. You need 2 pieces per ventil. Or. No. 1A 5 412 011 G
Valve stem for the exhaust. Suitable for Citroen DS19, DS20, DS21, DS23, CX petrol engines. (1
piece). For valve stem diameter 7.8 - 8.0 mm. Inner diameter at bottom: 10.0 mm.
Valve stem seals (8 fittings). Suitable for Citroen DS 20/21/23, starting from year of construction
1965. Inlet: Valve stem 8mm. Exhaust: Valve stem 9mm.
Valve stem seals (rubber rings). Suitable for Citroen 11CV (PERFO + D-Engine). Citroen DS, early
years of construction. Set 8 fittings. Dimension: 7 x 11 x 2,5mm. Or. No. 456998
Valve stem seals for the intake. Suitable for Citroen DS19, DS20, DS21, DS23, CX petrol engines. (4
pieces). For valve stem diameters 7.5 - 8.00 mm. Inner diameter at bottom: 10.5 mm
Valve stem seals. Suitable for Citroen DS 20/21/23, from year of construction 1965. Citroen HY
Inlet: valve stem 7.8 - 8.0 mm. Inner diameter at bottom: 10 mm. Exhaust: valve stem 7.5 - 8.0 mm. Inner diameter at bottom: 10.5 mm.
Valve adjusting screw (valve clearance). Suitable for Citroen DS + Citroen HY. Thread: M7. Length
26mm. Or. No. 1D5412567A
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Cylinder head screw (10 x 102mm). Suitable for Citroen 11CV, with Perfo engine. Citroen HY, of year
of construction 07/1952 to 11/1958.
98 Articles | Page 2 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
