Peugeot / Alle / drive shaft

Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease was particularly developed for high-speed bearings (wheel bearings). Extremely acid-resistant! (Seawaters)

Quality: 1

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

Quality: 2

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

Quality: 3

• Suitable for this article
• Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• Lubricating gun small, 120cc. Optimally for on the way and difficult attainable lubrication nip
  18,74 €

M16, nut M16x1,5, lock.

Quality: 3

M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover screw connection on the 11CV with D-engine. Or. No. 2372-S

Quality: 2

• Suitable for this article
• Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

M9, nut M9x1,25. For example mounting drive shaft at the gearbox for 2CV. Amount: 9mm.

Quality: 2

• Suitable for this article
• Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

M9, washer. Dimension: 9.2 x 20 x 1,2mm.

Quality: 2

P 104, drive shaft on the left + on the right fitting, for Peugeot 104. Installed from 09/1973 to 06/1988. Or. No. 327459. Lengthens 710mm, 21 teeth of wheel side, 22 teeth gearbox side.

Quality: 3

P 104/Visa, nut drive shaft in front, Peugeot 104, Citroen Visa + LNA. Thread M20x1,5. Or.Nr.693544

Quality: 3

P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404, 404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17

Quality: 3

P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm. Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09

Quality: 3

Driveshaft for Peugeot 204, length: 760mm, 27 teeth on both sides. Or.no.: 327442 + 327425

Quality: 3

P 204/304, drive shaft, fits on the left of or on the right. Peugeot 204 + 304. Overall length: 740mm. External toothing: 23 teeth both sides.

Quality: 3

P 304/305, drive shaft, fits on the left of or on the right. Peugeot 304. Overall length: 760mm. External toothing: 23 teeth both sides. Plus 75 Euro Old part deposit.

Quality: 3

P 404 universal joint at the gearbox outlet, for the cardan shaft. Suitable for Peugeot of 404 with BA7 gearbox. Number of teeth: 12 + 25. Or. No. 2619.16

Quality: 4

P 404, cardan shaft. 1826mm long. External toothing: 12 teeth. Internal teeth: 25 teeth. Suitable for Peugeot 404.

Quality: 4

P 404/504, neck journal bearing flange (outlet cardan shaft at the gearbox). Suitable for Peugeot 404 + 504. Or. No. 2608.10

Quality: 3

P 404/504, neck journal bearing flange mounting kit. Suitable for Peugeot 404 + 504.

Quality: 3

P 404/504, neck journal bearing flange sealing ring (O-ring). Dimension: 65 x 59 x 6mm. Suitable for Peugeot 404 + 504.

Quality: 3

P 404/504, cardan shaft. 1826mm long. External toothing: 25 teeth. Internal teeth: 25

Quality: 4

P 404/504, cardan shaft center bearing. Outside diameter: 55mm. Inside diameter: 47mm. 16mm wide. Suitable for Peugeot 404 + 504. Or. No. 2811.08

Quality: 2

Shaft seal for bearing knockout spindle, Peugeot 404/504. 45x62x10mm, Or.Nr.334510

Quality: 3

P 404/504/505, universal joint at the gearbox outlet, for the cardan shaft. Suitable for Peugeot 404, of year of construction 11/1967 to 12/1971. Peugeot 504 (1796cm ³, 1971cm ³, 2664cm ³) sedan, BREAK, Cabriolet + Coupe. Peugeot 505 (all engines). Number of teeth: both sides 25. Or. No. 2619.17

Quality: 4

P 404/504/505, shaft seal (with metal inset) for the wheel hub rear (full-floating axle). Dimension: 53 x 79 x 10mm. Suitable for Peugeot 404, 504, 505. Or. No. 3345.31

Quality: 3

P 505, drive shaft, fits on the left + on the right. For Peugeot 505 (all engines), starting from year of construction 03/1979. Length: 741mm. Teeth wheel side: 27. Teeth at the differential: 27.

Quality: 3

Lubrication nipple cap from synthetic. Color: Red.

Quality: 1

Lubricate nipple with M7 thread. Suitable for Citroen 2CV, DS, 11CV, HY, etc.

Quality: 3

• Suitable for this article
• Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Simca 1000, joint longitudinal shaft Simca 1000, 944 + 1118ccm. Installed from 10/1961 to 07/1978. Or.Nr.42899

Quality: 3

Shaft seal (40 x 58 x 10) differential both sides. Suitable for Peugeot 204, 304, 305, 504, J7. Talbot Horizon, Samba, Solara. Inside diameter: 40.00mm. Outside diameter: 58.00mm. Heavy one: 10.00mm. Or. No. 3121.09. Made in Germany.

Quality: 3

Shaft seal differential. Dimension: 28 x 45 x 8mm. Suitable for Renault 4 (first version). Differential Peugeot 504, 505, 604. Made in Germany.

Quality: 2

• Suitable for this article
• R4/R5, O-ring for the drive shaft flange at the gearbox. Suitable for Renault R4, starting from
  3,37 €