main brake cylinder for Peugeot Alle

Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for hydraulic brake systems

For lubricating cylinder liners and pistons. Extends the service life of brake cylinders. Protects against corrosion. Compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids. Keeps sleeves soft. Supports the installation of O-rings, lip seals, sleeves and other sealing elements made of rubber-elastic materials. Apply brake cylinder paste thinly and evenly on the surfaces to be lubricated. Attention: If you are installing a new wheel brake cylinder in your classic car, please coat the pistons and sleeves with this paste before installation. This will increase the longevity of the new brake parts on cars that are driven occasionally.

Hollow bolt for master brake cylinder Citroen 11CV, HY, Peugeot 203. The screw comes at the front

side into the master brake cylinder and takes up the distributor for the brake hoses. Thread 1/2 x 20 UNF. For 15mm connection diameter. Length without bolt head = 29mm.

P 204/304/404, master brake cylinder, single circuit brake system, 19mm piston diameter. Suitable

for all models to year of construction 1977, which have in front disc brake + rear drum brake. Without connection for stop light switche. Brake line connector 3/8 " 24UNF. The connections are vertical to the flange connection. The flange has 7,5mm bore diameter. 50mm bore distance in the flange. Made in Europe.

P 204/304/504/104 repair set for the master brake cylinder (2 circle brake). Piston diameter

19,05mm. The sealing set fits for the two different 2 circle master brake cylinder Peugeot 304. With early master brake cylinder (4601.37) must be ordered the sealing set 2x (there has each piston 2 collars). With the later version starting from FIN 3.733.770 and the Or. No. 4601.72, you need only 1 sealing set. The early version has 2 dowel pin, the late version a retaining ring.

P 403/404, master brake cylinder. Piston diameter: 22mm. Brake line connector: 1/2 x 20 UNF. Brake

fluid reservoir thread: about: M19 x 1,5. Suitable for Peugeot 403, starting from year of construction 10/1960. Peugeot 404, starting from year of construction 07/1960. Not suitable for Thermostable brakes. Or. No. 460112. Made in Europe.

P 404, master brake cylinder sealing set (2 circle brake system). Piston diameter: 19,0mm. Suitable

for original master brake cylinders 4601.25 / This master brake cylinder are installed only for export models into the following countries: USA, Switzerland, Norway, Sweden.

P 404, master brake cylinder, 31.75mm piston. Suitable for Peugeot 404, all models LD Thermostable

starting from year of construction 1965. Peugeot 404 all Thermostable, starting from year of construction 02/1966. Peugeot 404 all models U6A, starting from year of construction 1966. Installation opening in the engine front wall: 42mm. Follower depth for the actuation: 50mm. Securement: 8,5mm diameter, 60mm from center to center. Thread for the brake fluid reservoir: 3/4 x 16h. Made in Europe.

P 404/504, brake hose from the master brake cylinder to the Hydrovac. Suitable for Peugeot 404 +

504. Length: 270mm. Thread: Both sides 3/8 x 24 UNF. If 1/2" connections be present , use please adapter pieces 74561 + 74565. Or. No. 458001

P 504, brake power controller, suitable for Peugeot 504, saloon, convertible + coupé. For

convertible + coupé (all models 4 + 6 cylinder) from year of construction 08/1977 until end of production. For saloon with disc brakes (except TI) up to 08/1977 and serial number 2 058 001. For saloon TI from serial number 2 058 001. Bendix brake system. 3x brake line connection M10x1. Or. No. 4861.18

P 504, master brake cylinder dual circuit. Brake system: Bendix - ATE. Piston diameter: 20,6mm. 3x

brake line connector M10. Suitable for Peugeot 504 sedan, starting from year of construction 07/1977. 504 BREAK, of year of construction 10/1975 to 07/1979. Cabriolet + Coupe starting from year of construction 1975. Made in Europe.

P 504, master brake cylinder, dual circuit. Suitable for Peugeot 504 sedan, of year of construction

07/1975 to 07/1977. 504 Cabriolet + Coupe, to year of construction 12/1977. Piston diameter: 19,05mm. Brake line connector: 2x 10mm. Made in Europe. Or. No. 4601.52 + 4601.63