suspension, spring struts, suspension cylinder for Peugeot Alle

Shock absorber boot (bellows on the shock absorber). Diameter: 50mm + 20mm. Suitable for Peugeot

204, 304, 404 (from 1965), 504, 505, 604. Per piece. Or. No. 5254.07

Shock absorber boot (bellows on the shock absorber). Diameter: 50mm. Suitable for Peugeot 404, up

to year of construction 1964. per piece. Or. No. 5254.05

P 203/403, bonded-rubber bushing mounting plate spring in front, Peugeot 203 + 403. Measurements

12 x 54 x 25 x 50mm. Or.Nr.503213

P 204/304, spring plate, rear above. Mounting of the shock absorber. Suitable for Peugeot 304

sedan. Peugeot 204, starting from chassis number: 9.064.001. Or. No. 5165.18

P 204/304, spring plate, front above. Mounting of the shock absorber. Suitable for Peugeot 304, to

chassis number 3.015.671. Peugeot 204 first version. Or. No. 5210.08

P 204/304, shock absorber in front, repair set. Second version. Suitable for Peugeot 204 + 304

(starting from year of construction 1973)

P 204/304, ball joint down, repair set (front axle). By side. Suitable for Peugeot 204 + 304

Thread: M11x1. Or. No. 3640.07

P 204/304/404, needle bearing spring-and-damper unit above (dome bearings). Outside diameter: 85mm

Inside diameter: 60,1mm. Heavy one: 3,6mm. Suitable for Peugeot 204, 304 + 404. Or. Nr. 5035.05

P 404, spring plate in front. Diameter: 145mm. Suitable for Peugeot 404. Per piece

P 404, ball bearing for the top of the suspension strut (strut mount). Suitable for Peugeot 404

Outer diameter: 83.5mm, inner diameter: 60.1mm, thickness: 8.7mm. Or. No. 5035.04.

P 404, suspension strut sleeve (bellows on the shock absorber). Suitable for Peugeot 404 (1

assembly, 90mm) up to the year of construction 1964! Or. No. 5254.02

P 404, ball joint/ball and socket joint, repair set. Per side. Suitable for Peugeot 404. Thread

11x1. Or. No. 364012

P 404/504, spring plate in front. Diameter 165mm. Suitable for Peugeot 404 + 504. Per piece

P 404/504, stud bolt suspension spring rear. M12x1,5. 112mm lengthens. Suitable for Peugeot 404 +

504

P 504, spring plate above. Securement 12mm. Starting from serial number 2348367. Suitable for

Peugeot 504.

P 504, upper needle bearing for suspension strut (strut mount). Outer diameter: 92mm, inner

diameter: 74.5mm. Thickness: 2.8mm. Suitable for all Peugeot 504 from 1969 (saloon, convertible, coupé, estate). All engines! Or. No. 5035.08

P 504/505, spring plate above, starting from chassis 3972016. Suitable for Peugeot 504 + 505

Petrol + Diesel

P 504/505, spring plate above. Suitable for Peugeot 504 (sedan + Cabrio) petrols + 505 petrols. It

is attached an adapter ring, so it can use a spring-and-damper unit with 12mm + 14mm thread.

Shock absorber nut. Outside diameter: 55mm. Suitable for Peugeot 204, 304, 404, 504.