steering rods for Peugeot Alle

J5/C25, tie rod without tie rod end, on the left + on the right fitting. Thread M16 x 1,5. Citroen

C25 + Peugeot J5, without power steering. Installed to year of construction 1990. Or. No. 381227

Tie rod end Citroen C25, Peugeot J5, Fiat Ducato. Starting from year of construction 1981, on the

left + on the right fitting. Thread M16x1,5, right-hand thread.

Collar steering gear. Suitable for Renault R8, Alpine, Simca 1000. Matra Djet. Assembly diameter

about 40mm + 10mm. Or. No. 7700653459

Nut selflocking M14 x 1,5. E.G. suitable for tie rods Renault R4.

P 104/204/304, bonded-rubber bushing for the gear rack. Suitable for Peugeot 104, 204, 304. Inside

diameter: 10mm. Outside diameter: 24mm. Length inside: 24mm. Or. No. 4059.04

P 203/403, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie

rod. Peugeot 203 + 403. 12x30x30x24mm. 5248.04

P 204, tie rod complete, left. Suitable for Peugeot 204, to year of construction 1969. Or. No

3814.06 Made in Italy

P 204, tie rod complete, right. Suitable for Peugeot 204, to year of construction 1969. Or. No

3813.29 Made in Italy

P 204/304, tie rod left, complete. Suitable for Peugeot 204 + 304, starting from year of

construction 1969. Or. No. 3813.39

P 204/304, right tie rod completely (inclusive tie rod end). Suitable for Peugeot 204 + 304

starting from year of construction 1969.

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 6,5mm highly!

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 8mm highly!

P 304, tie rod, without tie rod end. Length: 320mm. Thread: M12x1 + M14x1,5. Suitable for Peugeot

304. The tie rod fits on the left + on the right. Per piece

P 304/104/205/Visa, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot 304 starting from 1972, Peugeot 104, Peugeot 205, Citroen Visa.

P 403, tie rod end completely, for Peugeot 403. 28,5mm mounting. Compare please! There was also

28,0mm mounting! Or. No. 389906

P 404, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie rod

Peugeot 404. 12x30x30x24mm

P 404, left track rod (inclusive tie rod end). Suitable for Peugeot 404. Female thread M16 x 1,5

Or. No. 3813.38 Made in Italy

P 404, tie rod, right. Suitable for Peugeot 404, of year of construction 1963 to 1971. Or. No

3814.11 Made in Italy

P 504, tie rod completely (inclusive tie rod end + collar steering gear). Suitable for Peugeot 504

Cabriolet + Coupe. Also suitable for Peugeot 104, Peugeot 505. Citroen VISA. Or. No. 3812.15. The tie rod is on the left + on the right identically.

P 504, tie rod completely (inclusive tie rod end). Suitable for Peugeot 504. The tie rod fits on

the left + on the right. Per piece. Total length turned completely together, from the middle of the ball head to the middle of the fork head: 270mm. Middle threaded tube, total length: 162mm. M14 adjustment thread on both sides. Or. No. 3813.35 Made in Italy

P 504, tie rod completely. Suitable for Peugeot 504, starting from year of construction 1980

(sedan, Cabriolet + Coupe). Peugeot 604. Per piece. The tie rod is on the left + on the right identically. Or. No. 3812.17 Made in Italy

P 504, tie rod, old version. Left + right = identical. Per piece. Suitable for Peugeot 504, made in

Italy. Length centre fork head to centre ball head = 275mm.

P 504, tie rod, without tie rod end. Length: 262mm long. 1x male thread M12x1,0 + 1x female thread

M14x1,5mm. Suitable for Peugeot 504 Cabrio + Coupe, Peugeot 604.

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.12

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.18

P 504/505/604, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot to year 1980. Peuheot 505 + 604.

P 504/604, collar for the steering column (power steering). Suitable for Peugeot 504 + 604. Or. No

4066.16

P 504/604, tie rod end (fits on the left or on the right). For Peugeot 504, to year of construction

12/1979. Peugeot 604. Thread: M14x1,5 Made in Italy

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.