R4/R5/R6, tie rod completely (inclusive tie rod end). Suitable for Renault R4, starting from year
of construction 1979. Renault R5 + R6. Or. No. 7701461010. Made in Italy
for Renault Alle
3411 Articles | Page 51 of 69
R4/R5/R6, ball and socket joint down on the left, for Renault R4 + R5, R6. Installed from year of
construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701450635
R4/R5/R6, ball and socket joint down on the right, for Renault R4 + R5, R6. Installed from year of
construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No.: 7701450637
R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault
R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.
R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle
Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6, R6, Dauphine. Engine
800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.
R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for
Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5/R6/R12/R16, steering gear bonded-rubber bushing (mounting of the tie rod), steering side
Suitable for Renault R4, R5, R6, R12, R16. Inside diameter: 10mm. Construction length inside: 28mm. Outside diameter: 28mm. Construction length outside: 20mm.
R5/R6/R16, master brake cylinder. Brake system: Bendix. Piston diameter: 19,05mm. Suitable for
Renault R4 (Fasa), R5, R6, R16. Brake line connector: 3x 3/8x24UNF. Made in Europe.
R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left + on the right
fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400
R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc
(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.
R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines
C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)
R4/R5/R8, cylinder head gasket. Engine: 688, 813 (1108cc). Suitable for Renault R4 1,1L, starting
from year of construction 1978. R5, R6, R8, R8 Malor, Floride S, Estafette (R2132).
Gear crankshaft, 17 teeth, suitable for Renault R4, R5, R8, R10. Engines 956cc, 1108cc, 1289cc
Installed from 11/1962 to 06/1990. Or. No. 7700564247.
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize
(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize
(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard
dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm
diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.
R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width
20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
R4/R6 FASA, water pump Renault R4 + R6 Fasa (Spanish production). For engine: 813. Cubic capacity
852cc. Attention: This water pump is only suitable for R4 + R6 from Spanish production by FASA. Important if you want to import a vehicle from Spain or Portugal.
R4/R6, brake hose rear. Suitable for Renault R3, R4, starting from year of construction 1961
Renault R5 Super, Renault R6. Length: 270 - 280mm. Thread: 2x female thread 3/8 x 24UNF. Or. No. 7701348773. Made in Europe.
R4/R6, A-arm bush set, for one side! Suitable for Renault R4 + R6. Suitable left or on the right
Contents: 3 bonded-rubber bushing, nuts, disks.
R4/R6, transmission suspension (cast iron gearbox). Suitable for Renault R4, starting from year of
construction 1974. R6, of year of construction 1972 to 1980.
R4/R6, radiator hose down (exhaust radiator). Suitable for Renault R4 starting from year of
construction 1962. (R1120+21+22+23). Renault R6 from 1965 to 1970. (R2102+04+05+06). Connections 35 + 35mm.
R4/R6, radiator hose down (exhaust radiator). Suitable for Renault R4, of year of construction 1976
to 1989. (R1128+29,2370+2430+210B+239B). Renault R6, connections 31 + 31,5mm.
R4/R6, engine suspension in front on the right. Suitable for Renault R4 (R1123, R1126, R1129
R2106, R2391, R2392), of year of construction 1976 to 1982. R4 (R1123, R2106, R2391), starting from year of construction 1983. R6, to year of construction 1970.
Wishbone on the right above. Suitable for Renault R4 + R6. Installed from year of construction 1969
to 1984. Completely with ball joint (ball pin) and bonded-rubber bushings. Original Renault, no reproduction! Or. No. 0832140000
R4/R6, thrust strut left, last version, (not adjustable) connection wishbone to the thrust strut
eye. Suitable for Renault R4 + R6. The fixed struts have replaced the adjustable struts with fork mount. However, we cannot give an exact date. However, the fixed struts were fitted at least until the end of production in 1992. Or. No. 7700684590. If this strut is knocked out or even completely missing, you will get an adventurous ride!
R4/R6, thrust strut right, last version, (not adjustable) connection wishbone to the thrust strut
eye. Suitable for Renault R4 + R6. The fixed struts have replaced the adjustable struts with fork mount. However, we cannot give an exact date. However, the fixed struts were fitted at least until the end of production in 1992. Or. No. 7700684667. If this strut is knocked out or even completely missing, you will get an adventurous ride!
R4/R6, thrust struts bearing, suitable for Renault R4. Note: Only suitable for thrust strut with
unilateral securement. (Support of lower wishbones). Per piece. Or. No. 7702108305
R4/R6, bonded-rubber bushing front axle, for the upper A-arm. Suitable for Renault R4 + R6
Internal dimension 12 x 27. External dimensions: 26 x 23mm.
Water pump Renault R4 (845cc), with belt pulley. Type R112, of year of construction 1962 to 1986
Renault R6, of year of construction 10/1969 to 04/1980. Original manufacturer.
Water pump Renault R4 (845cc). Type R112, of year of construction 1962 to 1986. Renault R6, of year
of construction 10/1969 to 04/1980. Reproduction
R4/R6/R16, brake power controller sealing set. For 3 + 4 connection brake power controller
Suitable for Renault R4, R6 + Renault R16 (R1156, R1157).
R4, R8, Alpine, camshaft drive chain set, 58 chain links (simple - simplex chain), suitable for
Renault R4, R8, Alpine 1300. Consisting of: Camshaft drive chain, chain pinion for crankshaft + camshaft, gear seal cap.
R4/R8R10/Dauphine, stop light switch in the master brake cylinder. Thread: 1/2 x 20UNF. Suitable
for Renault R4, early years of construction. Renault R8, R10, Dauphine etc.
R4F4, retaining clip for the ladder flap pop-up rod (the small flap above the rear door). Suitable
for Renault R4 F4. Or. No. 7703077008
R4F4, Ladder flap. Suitable for Renault R4 F4. Original supplier. No replica (NOS). The sheet metal
parts may have some rust or small dents! Or. N0. 0820470400
R4F4, camshaft for 845 cm³ engine. Engine version: 800-05 (34 hp). This camshaft was installed in
the Renault R4F4 (R2106 + R2391) with 845 cm³ engines (engine code: 800-05) until the end of 1977. Please note the country code for your country (e.g. Germany 120, France 100, Benelux 101, 102). Different camshafts were used depending on the country! Part no. 04 28 443 300. These camshafts are original NOS spare parts (new old stock).
3411 Articles | Page 51 of 69
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
