R5, side wall sheet metal (fender) at the rear left. Suitable for Renault R5 (3 doors). Length
1220mm. Height: 530mm. Made in Europe.
for Renault Alle
3430 Articles | Page 55 of 69
R5, side wall sheet metal (fender) at the rear right. Suitable for Renault R5 (3 doors). Length
1220mm. Height: 520mm. Made in Europe.
R5, bonded-rubber bushing (2 item) for the rear axle (inside). Suitable for Renault R5 (1 series)
of year of construction 10/1972 to 09/1984. R6 of year of construction 10/1969 to 04/1980. Inside diameter: 34mm. Outside diameter: 50,0mm. Length inside: 45,0mm. Length outside: 39,50mm. Or. No. 0855599000
R5, bonded-rubber bushing for the suspension. Suitable for Renault R5. Dimension: ca. 37 x 55 x 34
x 28mm. Or. No. 7700531821
R5, coverings (2 x front seat, 1x rear seat). Suitable for Renault R5 Alpine Turbo. Material
Velour beige (Cotele beige).
R5, coverings (2 x front seat, 1x rear seat). Suitable for Renault R5 Alpine Turbo. Material
Velour black (Cotele Noir).
R5, coverings (2 x front seat, 1x rear seat). Suitable for Renault R5 Alpine Turbo. Material
Velour wine-red (Cotele Rouge).
R5, shock absorber rear (per piece). Suitable for Renault R5, all model`s(apart from
LS-TS-TX-ALPINE-Turbo). Length when pushed together: 39.5 cm. Length when pulled apart: 58.5 cm.
R5, speedometer glass Jaeger (speedometer cover). Suitable for all Renault R5 phase 2. Also for
Alpine, Alpine Turbo + Turbo 2. Or. No. 7701026044. Caution: As the glass is very fragile, only install with cotton gloves!
R5, door hinge top, shim set (adjustment plates, 1,0 + 2,0 + 3,0mm). Suitable for the upper door
hinge for Renault R5 (122_). Or. No. 7700529640 + 7700529639
R5, door hinge bottom, shim set (adjustment plates, 1,0 + 2,0 + 3,0mm). Suitable for the lower door
hinge for Renault R5 (122_). Or. No. 7700529667 + 7700529668
Water pump, suitable for Renault R5 ((R1221, 1391, 1220, engine: 800.7.02, 800.7.100, 0.845L), of
year of construction 1972 to 08/1984. Or. no. 7701457451, 7701461174, 7701508975, 7701509721
Water pump seal, on the engine side. Suitable for Renault R5 (1,1L + 1,4L), R5 Alpine + R5 Alpine
Turbo. Or. No. 7700522340. Made in Germany
R5, Windshield seal. Suitable for Renault R5, from year of construction 1972 to 1984. The seal does
not need a trim! Original supplier by Renault. Made in France!
R5, Windshield seal. Suitable for Renault R5, of year of construction 1972 to 1984. For mounting
with flat trim! Original suppliers by Renault, Made in France!
R5/205, boot seal, sold by the metre. Suitable for Renault R5 (Phase 1). Peugeot 205 , 106 + 405
Overall width: 15.0 mm. Overall height: 30.0 mm. Width of edge protection: 9.8 mm. Height of edge protection: 13.5 mm. This seal has a pronounced sealing lip! The sealing lip is positioned at approximately 1.30 o'clock (cross-section view). Cut to customer's specifications: no returns accepted!
R5/Estafette/R12/R15, engine gasket set completely, inclusive cylinder head gasket. Suitable for
Renault R5, Estafette 1.3, to engine number 212538. Renault R12 + R15 1,3. Used in engines: 810 01, 810 02, 810 2/97, 810 6, 810 10, 810 5.
R5/Estafette/R12/R17, engine gasket set completely, inclusive cylinder head gasket. Suitable for
Renault T5, Estafette 1.3, starting from engine number 212539. Renault R12 + R15 1,3. Used in engines: 810 01, 810 02, 810 2/97, 810 6, 810 10, 810 5.
R5/R10/R12/R15, piston + liner (4 item). Renault engine 810 (1289cc). Suitable for Renault R5LS
TS, GTL. R5 Alpine. R10-1300. R12TS, LN, TR. R15TL, GTL. Bore: 73mm. Piston pin: 20 x 62. Piston rings: 1,75 + 2 + 4,0mm. Compression: 9,5:1. Outside diameter down: 78,41mm. Outside diameter above: 87,78mm. Height totally: 134,0mm.
R5/R12/R15 brake caliper front left. System Bendix. Piston diameter: 48mm. New part. Suitable for
Renault R5, from 01/1972 to 03/1985. R12 from 08/1973 to 08/1980. R15 + R17, from 03/1972 to 10/1980. Or. No. 7701006628
R5/R12/R15 brake caliper front right. System Bendix. Piston diameter: 48mm. New part. Suitable for
Renault R5, from 01/1972 to 03/1985. R12 from 08/1973 to 08/1980. R15 + R17, from 03/1972 to 10/1980. Or. No. 7701006629
R5/R12/R15/R17/R18, master brake cylinder. Brake system: Bendix. Piston diameter: 19,05mm. Suitable
for Renault R5, R12, R15, R17, R18. Brake line connector: 3 x M10. Made in Europe.
R5/R12/R16/R17/Alpine A310, Sealing set brake caliper in front, for Renault R5 starting from
01/1975, R12 all models, R15 all models, R16 all models, R17 Gordini, A310 of 6 liners of year of construction 1976 to 1980. 48mm piston, system Bendix. 2 different dust caps are attached. Mount the correct dust cap. The other cap, please dispose it.
R5/R12/R30, brake caliper sealing set, rear. For piston diameters: 36mm. Suitable for Renault R5
Alpine Turbo, R12 Gordini, R18 Turbo, R30.
R5/R6, window shaft seal. Suitable for Renault R5 and R6. However, this seal can also be used as a
universal fit. Sold by the metre. Returns on custom-cut items are not accepted. Total height 30.9 mm.
R5, door seal sold by the metre. Suitable for Renault R5 (Phase 1). R8 + R10. Seal dimensions
Total width: 25 mm. Diameter of the foam rubber seal: 15 mm. Height of the edge protector: 14 mm. Width of the edge protector: 15 mm.
R5/Rodeo, engine gasket set completely, inclusive cylinder head gasket. Suitable for Renault R5 +
Rodeo. Engine: 1289cc. 42 to 64HP. Used in engines: 810-719, 810-725, 810-726, 810-25, 810-26. Original by Glaser!
R6, drive shaft. Suitable for Renault R6 (fits left + right). Length: 633 mm. Number of teeth on
wheel side: 23. Number of teeth on gearbox side: 23. New part.
R6, indicator front on the left. Suitable for Renault R6, starting from year of construction
06/1973. Or. No. 7701016851
R6, indicator front on the right. Suitable for Renault R6, starting from year of construction
06/1973. Or. No. 7701016853
3430 Articles | Page 55 of 69
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
