for Renault Alle

Warning light with polished aluminium lid, green

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, red

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Control light orange, version Jaeger. This very good reproduction of the Jeager light are partial

installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light red, version Jaeger. This very good reproduction of the Jeager light are partial

installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Fender sealing trim in black, universal fitting, by meters. Customer cut, return not possible!

Wing protection (1 pair) with solenoid! Indispensably for workshop jobs!

Castle nut, M14X1,5. Low version

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Manifold seal for inlet + exhaust. Suitable for Renault Super5, Clio, R11. For the engines: 688

711, 688 712, CIC700/6/8/54, CIE700, CIE 714/15/28/19. Engine capacity: 956cc, 1108cc, 1237cc, 1397cc. Or. No. 7700706149

Manifold seal, inlet + exhaust. Suitable for Renault 4 Super (956cc).

Manifold seal, inlet + exhaust. Suitable for Renault R4, R5, Estafette, R12. For engines with

engine capacity: 852cc, 955cc, 1108cc, 1289cc.

Manifold seal, for inlet + exhaust. Suitable for Renault 4 + Renault with rear engine. Engine

capacity: 747 to 845cc. You need 2 pieces!

Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single

carburetor (round carburetor). Also suitable for Peugeot + Renault.

Radiator drain valve (tap), completely fabricated from brass. Thread: M14 x 1,5mm

Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1

kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

• Suitable for this article
• 
  Descaling agent for radiators. For decalcifying of copper and aluminium
  39,57 €

Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg

softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

• Suitable for this article
• 
  Degreaser for radiator. For cleaning and degreasing of copper and aluminium
  44,53 €

Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles

radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators

Radiator cap with seal. Suitable for Renault R4, R5, R16, R12, rear engine, Estafette etc.

Radiator cap expansion tank, brown, 1,4 bar. Suitable for Renault R4 with 0,8/1,1 L engines

(1123,1128,112C). Also for Renault R5, R9, R12, 21, SUPER5

Radiator cap expansion tank, green, 1,2 bar. Suitable for Renault R4 with 0,8/1,1 L engines

(1123,1128,112C). Also for Renault R5, R9, R12, 21, SUPER5

Radiator cap for the expansion tank. Suitable for Renault R4 (0.8 + 1,1L. R1123, R1128, R112C)

Renault R5. Paint marking: black (1.0 bar).

Radiator hose universal. Inside diameter: 10,0mm. Outside diameter: 17,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
  3,62 €

Radiator hose universal. Inside diameter: 12,0-13,0mm. Outside diameter: 19,0-22,0mm. Length

1000mm.

• Suitable for this article
• 
  Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band
  3,87 €

Radiator hose universal. Inside diameter: 15,0mm. Outside diameter: 22,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band
  3,87 €

Radiator hose universal. Inside diameter: 18,0mm. Outside diameter: 25,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band
  4,21 €

Radiator hose universal. Inside diameter: 22,0mm. Outside diameter: 29,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band
  4,26 €

Radiator hose universal. Inside diameter: 25,4mm. Outside diameter: 32,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band
  4,26 €

Radiator hose universal. Inside diameter: 8,0mm. Outside diameter: 15,0mm. Length: 1000mm.

• Suitable for this article
• 
  Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
  3,62 €

Cooling system vent screw. This vent screw has been installed in various Renault models (R4, R5

R8, R16, etc.). However, depending on the year of construction and model, other versions are also available. Please compare. Thread: M6 x 1. Or. No. 7701007672

Plastic bushing for the pedal shaft. Suitable for Renault 4CV, R8, Dauphine, Floride, Caravelle.

Synthetic rivet without pin, for 6,2mm securement opening.

• Suitable for this article
• 
  R4, Rubber stop in front, for the bonnet (mounts at the inside of the fender
  2,18 €

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Copper seal type A, (full copper). 16x22x1,5mm.

Copper paste 100gr.

Clutch release sleeve, suitable for Renault R16, R18, R20, Fuego. Inside diameter: 30/43mm. Outside

diameter: about 68,5mm. Overall height: 27,5mm.

Clutch completely. Suitable for Alpine 2,5 V6 Turbo, 136-185KW. Diameter: 228mm. Teeth: 21.

Clutch completely. Suitable for Alpine 2.8 V6 turbo, 118-1605KW. Diameter: 230mm. Teeth: 21.

Clutch completely. Suitable for Alpine A110 1300 (1289cc), of year of construction 1975 to 1976

Diameter: 180mm

Clutch completely. Suitable for Alpine A110, of year of construction 1968 to 1976. Engines: 812.00

810,05 + 1300S. Diameter: 170mm.

Clutch completely. Suitable for Alpine A310 1600 (1647cc). Engine: 843/30. Diameter: 200mm.

Clutch completely. Suitable for R17 1600TS, 1700TS, Gordini. Diameter: 215mm.

Clutch completely. Suitable for Renault Caravelle (1108cc). Renault R8 (1108cc). Diameter: 160mm

Teeth: 20.

Clutch completely. Suitable for Renault Caravelle (956cc). Renault R8 (956cc + 1108cc), to year of

construction 1965. Diameter: 160mm. Teeth: 10.

Clutch set Renault rear engine (Floride, Dauphine, Caravelle, A106, etc.). 10 teeth (the clutch

disk has torsion springs). 160mm diameter. Completely like original from new parts produced. An old part return is not necessary. Please observe the clutch adjustment in the service manual!

Clutch completely. Suitable for Renault R10 (R1190. 1108cc), starting from year of construction

1969. Engine: 688-02. Diameter: 160mm. Teeth: 20.

Clutch completely. Suitable for Renault R10 (R1192. 1289cc), of year of construction 1969 to 1972

Engine: 810-03. Diameter: 170mm. Teeth: 20.

Clutch completely. Suitable for Renault R12 (1289cc + 1389cc), starting from year of construction

10/1974. Diameter: 180mm.

Clutch completely. Suitable for Renault R12 (R117 + R133. 1289cc). Engine: 810.02 + 810-05 +

810.06. Gearbox: 351. Power: 40 to 60KW. Installed from 07/1969 to 09/1974. Diameter: 170mm.

Clutch completely. Suitable for Renault R15, TL, GTL (R1300, CH101021>), of year of construction

09/1975 to 1980. Engine: 810-10. Diameter: 180mm.

Clutch set completely. Suitable for Renault R15T, TL, GTL (R1300, >CH101020), of year of

construction 1971 to 1985. Engine: 810-10. Diameter: 170mm.