for Renault Alle

R16, carpet set dark grey. Suitable for Renault R16.

R16, ball and socket joint above, for Renault R16, starting from year of construction 9/1968

(R1151, 1152, 1153, 1154, 1156, 1157). On the left + on the right fitting. Pin height to area for screwing: 65mm. Thread height: 18mm. Thread measurement: M12 x 1,25. Or. No. 7701451902 Made in Italy

R16, ball and socket joint, for Renault R16 down. Installed starting from year of construction

09/1968. (R1151,1152,1153,1154,1156,1157). Pin height to area for screwing: 75mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 7701453022. Made in Italy

R16, locking mechanism pin (transparency). Suitable for Renault R16 TX. Per piece. Or. No

7700540442

R16, front muffler 1 version, suitable for Renault R16. Or. No. 0821684600

R16, preheating hose carburetor. Suitable for Renault R16 TX. Or. No. 7700575510

Water pump seal on the engine side. Suitable for Renault R16 + R16TS. Or. No. 0857525500

R16, windshield seal, suitable for Renault R16. Very good reproduction, with vulcanized butt

joints. For mounting with synthetic sealing trim. Or. No. 030556246100

R16/A310, Piston for brake caliper, front + rear. Brake system Bendix. Diameter: 54mm. Total

height: 47mm. Tread height: 37mm. Piston groove: 2mm. Piston collar: 8mm. Suitable for Renault R16 + Alpine A310 V6.

• Suitable for this article
• 
  R5 Turbo/Alpine A310 V6, brake caliper sealing set, front. Brake system
  11,81 €

R16/A310, water pump. Suitable for Renault R16 (all models). Alpine A310 (4 cylinder, Alpine

1600VD). Round pulley bracket. Hole spacing: 30mm. Attention: There were different mountings for the pulley. However, as the pulley is centred in the middle, the mounting holes can easily be reworked slightly.

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €

R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for

Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.

R16/Estafette/R15, wheel brake cylinder rear, on the left + on the right fitting. Brake system

Bendix. Suitable for Renault R16, Estafette, R15 TS, R12 BREAK, R17TL/TS. Piston diameter: 22mm. Brake line connector: 3/8x24UNF. Mounting board bore: 36mm. Length over everything: 69mm. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

R16/R12, headlamp, without "E" mark (reproduction). Suitable for Renault R16 + R12.

R16/R12, silent beech for the securement of the gear lever. Suitable for Renault R12 + R16. Inside

diameter 10mm, outside diameter 22mm, length 25mm, length over all 30mm.

R16/R12, gear rack eye (tie rod securement) for Renault R12, R16, R15, R17, R20. Thread M12x1. Or

No.7700504987

• Suitable for this article
• 
  Nut M12x1
  0,79 €

R16/R12/Alpine A310, caliper sealing set, front. Brake system: Bendix. Suitable for Renault R16

R12, Alpine A310. For piston diameter: 54mm.

R16/R12/R15, brake hose front (on the left + on the right befitting). Suitable for Renault R16, of

year of construction 1965 to 1976. Renault R12, R15. 1x female thread 3/8 x 24h. 1x male thread: 3/8 x 24h. Or. No. 7701348758

R16/R12/R16, piston ring set (for 1 piston). Suitable for Renault R16, R12, R17. Bore: 77mm

Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R16/R12/R17, steering gear - tie rods collar set (2 fittings). Suitable for Renault R16, R12, R17.

R16/R12Gordini/R17/R20. Camshaft drive chains set, consisting of camshaft drive chain duplex - 72

chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.

R16/R12TS/Alpine 110, master brake cylinder. Brake system: Bendix. Suitable for Renault R16, R12TS

R5 (1,0L to year of construction 11/1977), Alpine A110. Piston diameter: 19,0mm. Brake line connector: 3x 3/8 x 24UNF. Or. No. 700548977. Made in Europe.

R16/R15/R12, brake hose front. Suitable for Renault R16, R12, R15. Length: 345mm. Thread: 1x female

thread 3/8x24. 1x male thread 3/8x24. Made in Europe.

R16/R15/R12/Alpine, safety sheet for the fly wheel. Suitable for Renault, with 1600ccm engine. Or

No. 0608395100

R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16

R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16/R17, gear wheel (pinion) for the window lifter. Suitable for Renault R16 + R17. Per piece

Diameter: 53mm. Thickness: 6.3mm

R16/R17/R18/R20, piston + liner (4 item). Renault engine 841 01

04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R16/R18/R20, bottom liner gasket (foot gasket. Suitable for Renault R16 TA (01/1973 to 08/1980) +

R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226

R16/R20/R30, sun roof seal rear, for Renault R16, R20, R30. Or.Nr. 7700633963.

R16/R5, master brake cylinder sealing set (dual circuit brake system). For piston diameters

19,05mm. Suitable for Renault R5, R16, R12, Fuego.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

R16/TR5 Turbo 1, indicator sealing rubber in front. 1 set for on the left + on the right. Suitable

for Renault R16 TX + R5 Turbo 1. Or. No. 770106994 + 7701016995.

R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.

R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R17, foam material backrest for a front seat (3 parts). Suitable for Renault R17 + Alpine A310

R17, foam material seat face for a front seat (3 parts). Suitable for Renault R17 + Alpine A310

R17, coverings (2 x front seat, 1x rear seat). Suitable for Renault R17 TS. Material: Vinyl black

The coverings are without slots for the adjusting lever. This must be cut. Therefore it can be used for R17 with lateral and adjustment in the backrest.

R18/Feugo, brake power controller. Suitable for Renault 18, FUEGO (1.4+1,6). Brake system: Bosch

Bendix. Connections: 3/8x24 UNF + M12x1.

R20/30, exhaust, exhaust pipe before the final silencer. Suitable for Renault R20 petrol + R30

Diesel. Or. No. 7700683434

R20/R30/Alpine, clutch master cylinder sealing set 19mm. Suitable for Alpine starting from 01/1076

6, R20, R25, R30 all models.

R20/R30/Alpine, clutch taking cylinder sealing set 28,6mm. Suitable for Alpine starting from

01/1076, R20, R25, R30 all models.

R20/R30/R18, brake hose. Length: 401mm length. Thread: 1x female thread M10x1. 1x male thread M10x1.

R4 F4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F4 + F6 (Camionette), of year of

construction 1976 to 08/1983. Inclusive all clips + Rubber Silent bearings!

• Suitable for this article
• 
  Exhaust assembly paste 150g. For sealing the plug-in connections when mounting
  8,33 €

R4 F4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F4 + F6, of year of construction

1983 to 1991. Inclusive all clips + Rubber Silent bearings!

• Suitable for this article
• 
  Exhaust assembly paste 150g. For sealing the plug-in connections when mounting
  8,33 €

R4 F4, rubber mat luggage compartment. Suitable for Renault R4 F4 (station car).

R4 F4, Tailgate seal (rear doors), per metre. Suitable for Renault R4 F4. You need 4 metres for

both doors.

R4 F4, Renault R4 F4 emblem (1 series), made of plastic. The emblem is installed on the tailgate

Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 35x205mm.

R4 F4, Renault R4 F4 emblem (2 series), made of plastic. The emblem is installed on the tailgate

Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 30x215mm.

R4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F6, of year of construction 1965 to

08/1983. Inclusive all clips + Rubber Silent bearings!

• Suitable for this article
• 
  Exhaust assembly paste 150g. For sealing the plug-in connections when mounting
  8,33 €

R4 F6, chassis sheet metal extension, for Renault R4 F6 (this is the sheet metal from the bottom of

the chassis, almost to the end of the sills). This plate was only used on the F6.