for Renault Alle
3411 Articles | Page 44 of 69
R4, tail light cap right (indicator is in the middle). Suitable for Renault R4, from 1961 to 1992
The tail light cap is a replica, suitable for manufacturer Seima. Attention: In Italy a different cap was used (our 85100).
R4, gear lever complete with guide. Made of 1,5mm stainless steel! Suitable for Renault R4. Or. Nr
7701457058 (gear lever) + 7700568021 (guide).
R4, gearstick lever repair kit (at the top of the crossmember (newer models) or at the radiator
(older models)). This is the guide for the horizontal gear lever in the engine compartment. Suitable for Renault R4. Or. No. 7703073093 + 0608330500.
R4, gear lever return spring. The spring keeps the gear lever in neutral position. Total length
80mm. Or. No. 7705016033
R4, hinge for the boot lid (left + right). Suitable for the Renault R4 sedan. These hinges are
attached to the outside of the boot lid (tailgate). They were installed in the last R4 generation until the end of production. Or. No. 7700634596 + 7700634597
R4, foam material front seat, for the seat face. Suitable for Renault R4, starting from year of
construction 1980. Overall dimensions: 52 x 49cm. Seat frame support: 46 x 46cm.
R4, foam material front seat, for the seat face. Suitable for Renault R4, to year of construction
1980. Overall dimensions: 49 x 49cm. Seat frame support: 45 x 46cm
R4, Window seal C-support. Suitable for Renault R4. Length: about 130cm. Note: The ends of the
seals must be glued with one another!
R4, headlamp round, without parking light. Concave (inward curved glass). Bulb socket
Double-filament bulb. Suitable for Renault R4. Reproduction from Europe, with "E" mark!
R4, headlamp round, without parking light. Concave (inward curved glass). Bulb socket
Double-filament bulb. Suitable for Renault R4. Reproduction from South America, without "E" mark.
R4, Headlamp trim ring, from high-grade steel. Suitable for Renault R4, first version. Version: For
headlamp Cibie, with from the outside adjustable height adjustmenting. The trim ring has one recess. The trim rings were production completely from high-grade steel.
R4, Sliding window guide, suitable for Renault R4 + R10. By meters! The window guide fits in the
metal frames of the doors! Width: 12mm. height: 11mm. This seal fits also very well for Floride + Caravelle (113cm per door window).
R4, sliding window guide, suitable for Renault R4, with synthetic frames! Length: 200cm. Wide
U-profile: 13,5mm. Height U-profile: 14mm. Wide over all (with sealing lip) 20,0mm. Height over everything (with sealing lip): 16,7mm.
R4, Sliding window guide, suitable for Renault R4. Per metre! The window guide fits into the metal
frame of the doors (please measure, there are different versions). Width approx: 15mm. Height approx: 14mm. The window guide is flocked on the inside (so that the window can be pushed). The rubber is relatively soft and can be fitted easily.
R4, lockcylinder (1 fittings) with 2x key. Suitable for Renault R4. Door in front on the left + on
the right. Original manufacturer Neiman. No reproduction. Neiman No. 902351
Lockcylinder set (4 fittings), doors + luggage compartment. Suitable for Renault 4, 4L, R4, R4F4
R4F6, R6, R12, R15, R17. Reproduction
R4, headlamp lens (curved inwards, concave). Original (with test mark). Suitable for Renault R4. No
replica. NOS. Version CIBIE SAE03
R4, box sill in front on the left, Triangle sheet metal outside. Suitable for Renault R4. The sheet
metal are galvanically treated with cataphoresis.
R4, box sill in front on the right, Triangle sheet metal outside. Suitable for Renault R4. The
sheet metal are galvanically treated with cataphoresis.
R4, Box sill trim wide (from high-grade steel), on the right. Suitable for Renault R4. 3
corrugations. Wide one: 41mm. Length: 1750mm. Polish, very beautifully.
R4, Box sill trim wide (from high-grade steel), on the left. Suitable for Renault R4. 3
corrugations. Wide one: 41mm. Length: 1690mm. Polish, very beautifully.
R4, radius arm mounting, at the rear left (radius arm-laterally, triangular with bonded-rubber
bushing). Suitable for Renault R4. Or. No. 0832108100
R4, radius arm mounting, at the rear right (radius arm-laterally, triangular with bonded-rubber
bushing). Suitable for Renault R4. Or. No. 0832108200
R4, Radius arm holder (cross-beam) at the rear left. With section, of the outer limit cross-beam
(without bonded-rubber bushings)! Suitable for Renault R4. Made in Europe.
R4, radius arm holder (cross-beam) at the rear left. Very good quality. With section, of the outer
limit cross-beam (without bonded-rubber bushings)!Suitable for Renault R4. The sheet metal are galvanically treated with cataphoresis.
R4, Radius arm holder (cross-beam) at the rear right. With section, of the outer limit cross-beam
(without bonded-rubber bushings)! Suitable for Renault R4. Made in Europe.
3411 Articles | Page 44 of 69
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
