for Renault Alle
Fuel hose black fabric coated, for Citroen 2CV. (between gasoline pump + carburetors. By meters
Diameter: 5,5mm. Fasten please the hose with a hose clamp. Customer cut, return not possible!
Fuel hose, only from rubber (not fabic encases). Inside diameter: 6,0mm. The hose is almost optical
identical, to the early time used hoses. Customer cut, a return is not possible!
Fuel stabiliser - fuel additive - octane booster from ELF/Total, for winter storage and storage of
all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!
Gasoline stabilizer 250ml. Preserves and protects the fuel from ageing and oxidation. Prevents
corrosion in the entire fuel system. Ensures problem-free immobilization of vintage cars, convertibles, motorcycles, scooters, quads, lawnmowers, chainsaws, and other petrol-driven 2-stroke and 4-stroke engines. Increases operational safety. With long-term effect. 25 ml from the dosing device preserve 5 l fuel. Before decommissioning, add the appropriate quantity to the tank and allow the engine to run for approx. 10 minutes.
Fuel tank drain plug (M12 x 1). Suitable for Citroen 11CV + 15CV, starting from year of
construction 07/1952. Or. No. 595362. Also suitable for many Peugeot + Renault.
Fuel pre-filter. For fuel pumps with round cover. Almost all available fuel pumps of our catalog
are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.
Mini Dent Puller. This mini suction puller its strong pulling power is ideal for minor car panel
dents. 55mm diameter suction disc. Can be used in pairs if necessary provides strong pulling power.
Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines
Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).
3 sheet metal nut (25 item), for the securement of the fenders. Suitable for many classical
Renault. Dimension: 30 x 14mm. For screws with 6,35mm diameter.
Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good
resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.
Indicator (reversing lamp) completely (clear), original Seima 3054. 3055 (no reproduction, with
test symbol "E"). Metal base + metal support! The glass has 68,5mm diameter! Suitable for Citroen 2CV (in front), AZU + AK (in front), Mehari (in front + rear), DS BREAK (rear), HY (in front). Renault R4, early years of construction.
Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the
indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.
Indicator seal for Seima indicators (the seal is located under the indicator base). Suitable for
front indicators on 2CV, AZU + AK front + rear lighting, Mehari rear lighting. Citroen DS Break rear lighting, Citroen HY front + rear. Renault R4 front (1 version). Or. No. DJF544-144A.
Indicator completely (Orange), original Seima 3054. 3055 (no reproduction, with test characters)
Metal base + metal support! The glass has 68,5mm diameter! Suitable for Citroen 2CV (in front), AZU + AK (rear), Mehari (in front + rear), AMI6 (rear), DS BREAK (rear), HY (in front + rear). Renault R4, early years of construction.
Indicator completely in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the right.
Indicator completely in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left.
Side indicator on the wing (complete indicator). Exact copy of the original indicator. Used only in
Italy and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504. Outer diameter: 45mm. Overall height: 20mm. 2x fastening 4mm, at a distance of 30mm. Centre hole 15mm.
Side indicator on the wing (only the cap). Exact copy of the original indicator. Used only in Italy
and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504.
Indicator laterally for the C-support! Chrome base. Suitable bulb = Sofitte 18 Watts. Suitable for
Citroen 2CV, Renault Estafette. To conversion!
Indicator lateral, universal suitable (in lozenge shape, like Renault emblem). Dimension: 38 x
58mm. Or. No. 7700666805. The lamp is supplied incl. bulb 12 Volt, 4 Watt
Front left indicator cap seal. Suitable for Citroen Dyane, ACDY. Renault Alpine A110 right. This
seal is fitted between the indicator cap and the indicator base.
Front right indicator cap seal. Suitable for Citroen Dyane, ACDY. Renault Alpine A110 left. This
seal is fitted between the indicator cap and the indicator base.
Turn signal cap yellow (Reproduction, without "E" test mark), suitable for in front 2CV, DS BREAK
K rear, AK rear, HY rear + in front, R4 old in front. Suitable for AXO lights. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar height from the inside measured: 14,5mm.
Turn signal cap yellow (Reproduction, without "E" test mark), suitable for in front 2CV, DS BREAK
K rear, AK rear, HY rear + in front, R4 old in front. Suitable for Seima lights. Narrow light collar. Outside diameter 68mm, mounting holes center to center about 58mm, collar height from the inside measured: 10mm.
Turn signal cap yellow (original AXO, with "E" test mark). Suitable for Citroen 2CV in front
Citroen DS BREAK rear. HY in front + rear. AMI6 rear. Renault R4 in front. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar heidht measured from the inside: 14,5mm. We could buy some thousand caps. No reproduction (NOS).
Turn signal cap yellow (original SEIMA, with "E" test mark). Suitable for Citroen 2CV in front
Citroen DS BREAK rear. HY in front + rear. Renault R4 in front. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar height measured from the inside: 10,0mm. We could buy some thousand caps. No reproduction (NOS).
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine A 110 on the right. For light manufacturer AXO
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine 110 on the right. For light manufacturers: Seima
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left. For light manufacturer AXO
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine 110 on the left. For light manufacturers: Seima
Turn signal cap clear (original AXO, with "E" test mark). Suitable for Citroen 2CV in front
Citroen DS BREAK rear. HY in front + rear. Renault R4 in front. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar height measured from inside: 14,5mm. We could buy some thousand caps. No reproduction (NOS).
Turn signal cap clear (original SEIMA, with "E" test mark). Suitable for Citroen 2CV in front
Citroen DS BREAK rear. HY in front + rear. Renault R4 in front. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar height measured from the inside: 10,0mm. We could buy some thousand caps. No reproduction (NOS).
6-volt electronic flasher relay. Power output from 10 watts to 110 watts! Branded product. This
flasher relay is universally applicable for classic cars with 6-volt on-board voltage (Citroën 2CV, DS, HY, Renault R4, Renault with rear engines). It can also be used for operation with a trailer coupling!
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
Indicator-flash relay round, electromechanical. 12 volts, max. 4x21 watt. 3 poles X/P/L !!! This
flasher relay is electromechanical, not electronic! This makes it insensitive to voltage fluctuations and it still makes real click-click noises (like in the past). Suitable for Citroen 2CV, Dyane, Mehari, AMI, DS, HY. Peugeot + Renault. Power supply symbol (+, X or B). Connection turn signal front + rear = symbol ( C or L ). Connection indicator light dashboard = symbol ( R or P ). This flasher relay is made exclusively for us! Attention: Pay attention to the pin assignment of the relay. Do not simply change the plugs! The plug designation is also printed again on the housing!
Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY
Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.
