(R1151, 1152, 1153, 1154, 1156, 1157). On the left + on the right fitting. Pin height to area for screwing: 65mm. Thread height: 18mm. Thread measurement: M12 x 1,25. Or. No. 7701451902 Made in Italy
09/1968. (R1151,1152,1153,1154,1156,1157). Pin height to area for screwing: 75mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 7701453022. Made in Italy
joints. For mounting with synthetic sealing trim. Or. No. 030556246100
height: 47mm. Tread height: 37mm. Piston groove: 2mm. Piston collar: 8mm. Suitable for Renault R16 + Alpine A310 V6.
1600VD). Round pulley bracket. Hole spacing: 30mm. Attention: There were different mountings for the pulley. However, as the pulley is centred in the middle, the mounting holes can easily be reworked slightly.
Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.
Bendix. Suitable for Renault R16, Estafette, R15 TS, R12 BREAK, R17TL/TS. Piston diameter: 22mm. Brake line connector: 3/8x24UNF. Mounting board bore: 36mm. Length over everything: 69mm. Made in Europe.
diameter 10mm, outside diameter 22mm, length 25mm, length over all 30mm.
R12, Alpine A310. For piston diameter: 54mm.
year of construction 1965 to 1976. Renault R12, R15. 1x female thread 3/8 x 24h. 1x male thread: 3/8 x 24h. Or. No. 7701348758
Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.
chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.
R5 (1,0L to year of construction 11/1977), Alpine A110. Piston diameter: 19,0mm. Brake line connector: 3x 3/8 x 24UNF. Or. No. 700548977. Made in Europe.
thread 3/8x24. 1x male thread 3/8x24. Made in Europe.
R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
Diameter: 53mm. Thickness: 6.3mm
04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.
R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226
19,05mm. Suitable for Renault R5, R16, R12, Fuego.
for Renault R16 TX + R5 Turbo 1. Or. No. 770106994 + 7701016995.
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
The coverings are without slots for the adjusting lever. This must be cut. Therefore it can be used for R17 with lateral and adjustment in the backrest.
Bendix. Connections: 3/8x24 UNF + M12x1.
Diesel. Or. No. 7700683434
6, R20, R25, R30 all models.
01/1076, R20, R25, R30 all models.
construction 1976 to 08/1983. Inclusive all clips + Rubber Silent bearings!
1983 to 1991. Inclusive all clips + Rubber Silent bearings!
Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 35x205mm.
Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 30x215mm.
08/1983. Inclusive all clips + Rubber Silent bearings!
the chassis, almost to the end of the sills). This plate was only used on the F6.
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
