for Renault Alle
3412 Articles | Page 15 of 69
Dauphine/Floride, shock absorber rear (2 fittings). Suitable for Renault Dauphine + Dauphine
Gordini, of year of construction 10/1960 to 05/1964. Floride sedan, from 10/1960 to 05/1964. Min. lengthens: 295mm. Length max.: 386mm.
Dauphine/Floride, shock absorber front (2 fittings). Suitable for Renault Dauphine + Dauphine
Gordini, of year of construction 1956 to 1959. Renault Floride, of year of construction 1956 to 1959. Lengthens min.: 207mm. Length max.: 320mm.
Dauphine/Floride, shock absorber front (2 fittings). Suitable for Renault Dauphine aerostable +
Dauphine Gordini aerostable, starting from year of construction 1956 to production end. Renault Floride aerostable, of year of construction 1956 to 1964. Min. lengthens: 268mm. Length max.: 336mm.
Water pump Renault Floride, Dauphine. New part. Or.Nr.9806440. Caution: The Floride + Dauphine has
an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Dauphine/Floride/R8/R10/A110, shock absorber rear (2 fittings). Suitable for Renault Dauphine +
Dauphine Gordini, of year of construction 1956 to 09/1960. Floride starting from year of construction 06/1964. Renault R8 + R10. Alpine A110, starting from year of construction 01/1966. Length compressed: 250mm. Length extended: 385mm.
Dauphine/R(/R10, wheel bearing set in front, suitable for Renault Dauphine, R8, R10. The bearing
set consists of 2 bearings. Bearing 1 = 17x40x13,2mm. Bearing 2 = 22x47x20,75mm. Or. No. 0857615500 + 0857615300.
Dauphine/R8/R10, shock absorber rear (2 fittings). Suitable for Renault Dauphine, apart from
Gordini, of year of construction 03/1956 to 03/1967. Renault R8 + R10 (all model`s), of year of construction 01/1967 to 10/1972. Min. lengthens: 240mm. Max. 360mm lengthens. Securement: M10
Dauphine/R8/R10/Caravelle, bush in the upper transmission suspension. Suitable for Renault
Dauphine, R8 + R10, Caravelle, Floride. Or. No. 8300009
Dauphine/R8/R10/Caravelle, transmission suspension on the left. Suitable for Renault Dauphine, R8 +
R10, Caravelle, Floride.
Dauphine/R8/R10/Caravelle, transmission suspension on the right. Suitable for Renault Dauphine, R8
R10, Caravelle, Floride.
Fuel sender. Suitable for Renault Dauphinoise + Juvaquatre. !! Attention: The fuel sender has 1x
connection for the fuel gauge.
Cap for a brake fluid reservoir from glass. Thread about 44mm. Suitable for Citroen 11CV, 2CV, HY
Panhard, Peugeot 203, 403, 404.
Kunststoff-Teufel® is a highly active and electrolytic cleaning agent. It effortlessly removes the
strongest grease and oil stains, nicotine, soot, burnt-in stains and much more from plastics and other alkali-resistant surfaces. An antistatic and dirt-repellent surface is left on the cleaned surfaces. Kunststoff-Teufel® is the perfect cleaner for household, hobby and business (e.g. ideal for cleaning kitchens, blinds, caravans, garden furniture, tarpaulins, car and truck interiors etc.). 1000ml spray bottle! We ourselves only work with the "Teufelsreiniger" (devil's cleaner). We have only had the best experiences. Made in Germany
Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the
cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.
Sealing sleeve brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also
suitable for other vehicles with 1,25 inch piston (31,75mm).
Sealing sleeve, for a wheel brake cylinder piston (1.1/8 inch = 28,56mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (19,0mm). Suitable for Citroen HY. Also universal
fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (7/8 inch = 22,19mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the following Renault
liners. Our. No. 80058 (Renault 4CV, R1062). Per piece.
Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following
Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.
Sealing set wheel brake cylinder rear (7/8 inch = 22,2mm). Suitable for Citroen HY, of year of
construction 1963 to 1968. Renault Estafette, starting from year of construction 1967. Renault R16.
Seal intake manifold (per piece). Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 +
R17. Fuego (1,6L). Or. No. 0857720900
Seal intake manifold (per piece). Suitable for Renault R16 1,6/TS/TX. Renault R15 + R17 (1.6 L
engine). Fuego (1,6L). Or. No. 0857720800
Seal intake manifold. Suitable for Renault R5 1.4 + 1.4 turbo. Renault R5 Alpine 1.4 turbo. Inside
diameter: 30,0mm. Or. No. 7701036764.
Seal exhaust elbow. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego
(1,6). Or. No. 7700501840
Fuel pump cover gasket. For fuel pumps with round cover. Almost all available fuel pumps of our
catalog are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Measurements about 44 x 36mm. 2mm heavily.
Seal for the spark plug tube (under the valve cap). Suitable for Renault R8, R10, R12, R16, R20
Fuego, Alpine. Or. No. 782600400
Seal Y-pipe. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L)
Peugeot 505,2.0 TI/STI + 2.2 GTI. Or. No. 7700657683 + 7701036761
Seal on the left, for the gear shift axle, at the gearbox (365 gearboxes). Suitable for all Renault
with 365 gearboxes. E.G. Renault R12, R16, R20, Fuego, Alpine. Or. No. 0608357000. Opening diameter: 15 + 25mm. Length: 25mm.
Seal on the right, for the gear shift axle, at the gearbox (365 gearboxes). Suitable for all
Renault with 365 gearboxes. E.G. Renault R12, R16, R20, Fuego, Alpine. Or. No. 0608353800. Opening diameter: 23 + 25mm. Length: 35mm.
Differential bearing. Outside diameter: 72mm. Inside diameter: 35mm. Overall height: 18,5mm
Suitable for Renault R4L, Alpine A110 all, A310 4 liners all, R8, R8 Gordine, Caravelle, Floride. For gearboxes: 330/353/364 (on the left and on the right). Gearbox 365/385 (only on the left). Or. No. 7703090187
Differential bearing. Suitable for Renault R4. Outside diameter: 72,0mm. Inside diameter: 37,0mm
Overall height: 19,0mm.
Differential bearing adjusting nut, with shaft seal. Suitable for Renault R4, R5, R6, R12, R16 (4
gear gearbox). Outside diameter: 74,0mm. Inside diameter: 35,5mm. Overall height: 18,0mm. Or. No. 0556231900 + 7700554257
Differential bearing adjusting nut, with shaft seal. Suitable for Renault R4, R5, R6, R12, R16 TX
(5 gear gearbox). Outside diameter: 74,8mm. Inside diameter: 35,0mm. Overall height: 16,0mm. Or. No. 7700634643
Torque wrench small, 5-25Nm. 1/4 " mounting. Only for screws with right-hand thread suitably
(torsion in in the clockwise direction).
Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various
Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99
3412 Articles | Page 15 of 69
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
