for Renault Alle
R16/R12, silent beech for the securement of the gear lever. Suitable for Renault R12 + R16. Inside
diameter 10mm, outside diameter 22mm, length 25mm, length over all 30mm.
R16/R12/Alpine A310, caliper sealing set, front. Brake system: Bendix. Suitable for Renault R16
R12, Alpine A310. For piston diameter: 54mm.
R16/R12/R15, brake hose front (on the left + on the right befitting). Suitable for Renault R16, of
year of construction 1965 to 1976. Renault R12, R15. 1x female thread 3/8 x 24h. 1x male thread: 3/8 x 24h. Or. No. 7701348758
R16/R12/R16, piston ring set (for 1 piston). Suitable for Renault R16, R12, R17. Bore: 77mm
Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.
R16/R12Gordini/R17/R20. Camshaft drive chains set, consisting of camshaft drive chain duplex - 72
chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.
R16/R12TS/Alpine 110, master brake cylinder. Brake system: Bendix. Suitable for Renault R16, R12TS
R5 (1,0L to year of construction 11/1977), Alpine A110. Piston diameter: 19,0mm. Brake line connector: 3x 3/8 x 24UNF. Or. No. 700548977. Made in Europe.
R16/R15/R12, brake hose front. Suitable for Renault R16, R12, R15. Length: 345mm. Thread: 1x female
thread 3/8x24. 1x male thread 3/8x24. Made in Europe.
R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16
R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16/R17, gear wheel (pinion) for the window lifter. Suitable for Renault R16 + R17. Per piece
Diameter: 53mm. Thickness: 6.3mm
R16/R17/R18/R20, piston + liner (4 item). Renault engine 841 01
04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.
R16/R18/R20, bottom liner gasket (foot gasket. Suitable for Renault R16 TA (01/1973 to 08/1980) +
R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226
R16/R5, master brake cylinder sealing set (dual circuit brake system). For piston diameters
19,05mm. Suitable for Renault R5, R16, R12, Fuego.
R16/TR5 Turbo 1, indicator sealing rubber in front. 1 set for on the left + on the right. Suitable
for Renault R16 TX + R5 Turbo 1. Or. No. 770106994 + 7701016995.
R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R17, coverings (2 x front seat, 1x rear seat). Suitable for Renault R17 TS. Material: Vinyl black
The coverings are without slots for the adjusting lever. This must be cut. Therefore it can be used for R17 with lateral and adjustment in the backrest.
R18/Feugo, brake power controller. Suitable for Renault 18, FUEGO (1.4+1,6). Brake system: Bosch
Bendix. Connections: 3/8x24 UNF + M12x1.
R20/30, exhaust, exhaust pipe before the final silencer. Suitable for Renault R20 petrol + R30
Diesel. Or. No. 7700683434
R20/R30/Alpine, clutch master cylinder sealing set 19mm. Suitable for Alpine starting from 01/1076
6, R20, R25, R30 all models.
R20/R30/Alpine, clutch taking cylinder sealing set 28,6mm. Suitable for Alpine starting from
01/1076, R20, R25, R30 all models.
R4 F4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F4 + F6 (Camionette), of year of
construction 1976 to 08/1983. Inclusive all clips + Rubber Silent bearings!
R4 F4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F4 + F6, of year of construction
1983 to 1991. Inclusive all clips + Rubber Silent bearings!
R4 F4, Renault R4 F4 emblem (1 series), made of plastic. The emblem is installed on the tailgate
Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 35x205mm.
R4 F4, Renault R4 F4 emblem (2 series), made of plastic. The emblem is installed on the tailgate
Suitable for Renault R4 F4 Fourgonnette. The emblem is glued on. Length: 30x215mm.
R4 F6, (1108cc) exhaust completely. Suitable for Renault R4 F6, of year of construction 1965 to
08/1983. Inclusive all clips + Rubber Silent bearings!
R4 F6, chassis sheet metal extension, for Renault R4 F6 (this is the sheet metal from the bottom of
the chassis, almost to the end of the sills). This plate was only used on the F6.
R4 F6, head flap seal long, for Renault R4 F6. For the R4 F6, you need about 400cm. Price by
meters! Customer cut, return not possible!
R4 F6, Renault R4 F6 emblem (1 series), made of plastic. The emblem is installed on the tailgate
Suitable for Renault R4 F6 Fourgonnette. The emblem is glued on. Length: 35x200mm.
R4 F6, Renault R4 F6 emblem (2 series), made of plastic. The emblem is installed on the tailgate
Suitable for Renault R4 F6 Fourgonnette. The emblem is glued on. Length: 30x220mm.
R4 F6, sliding window rubber seal (guide of the windows, window slides), for the side windows in
the van body. Suitable for Renault R4 F6 (R2370). The rubber are after-fabricated in high quality. Length: 330cm (sufficient for one side). Or. No. 7700632910
R4 F6, rear bumper. Suitable for R4 F6 van. These are original Renault spare parts. So-called: New
old stock spare parts (NOS). Part no. 7700715049
Water pump, suitable for Renault R4 F6 station car (R2370, 210B, 239B). For 1108ccm engine. The
water pump is supplied without belt pulley. Made one in Germany!
R4 F6, Windscreen seal. Attention, this gasket only fits Renault R4 F6. Not suitable for R4
Limousine (Berline) and R4 F4!
