for Renault Alle

4CV/Dauphine, radiator hose at the bottom, with outlet for the heater. Suitable for Renault 4CV

Dauphine.

4CV/Dauphine, plastic ring for the emblem in the steering wheel. Colour: beige. Suitable for

Renault 4CV, second version. Renault Dauphine.

4CV/Dauphine, plastic ring for the emblem in the steering wheel. Colour: grey. Suitable for Renault

4CV, second version. Renault Dauphine.

4CV/Dauphine, connecting rod bearing screw. Suitable for Renault 4CV + Dauphine.

4CV/Dauphine, wheel cover chromium-plated, for star rim. Suitable for Renault 4CV + Dauphine

Diameter: 215mm. Or. No. 5524593

• Suitable for this article
• 
  4CV, Hub cap mounting plate for star rim. Suitable for Renault 4CV
  6,84 €

4CV/Dauphine, wheel cover. Suitable for Renault 4CV, starting from year of construction 1958

Renault Dauphine. Diameter: 237mm.

• Suitable for this article
• 
  Wheel cover screw. Suitable for Renault R4, 4CV, Dauphine, Floride, Fregate
  6,24 €

4CV/Dauphine, tie rod (adjustable). Suitable for Renault 4CV, starting from year of construction

1955. Renault Dauphine. The tie rod fits on the left and on the right! The tie rod end has an M10 screw connection. The thread on the track rod has an M12 thread.

4CV/Dauphine, door handle inside (2 pieces). Suitable for Renault 4CV (final version) + Renault

Dauphine.

4CV/Dauphine, water drain plug, for the engine block. Suitable for Renault 4CV + Dauphine. Thread

M10x1

4CV/Dauphine, Intermediate gear engine control. Suitable for Renault 4CV + Dauphine

4CV/Dauphine/Caravelle/Alpine 110, brake hose rear. Suitable for Renault 4CV, Dauphine, Caravelle

Alpine A110. Length: 260mm.

4CV/Dauphine/Floride, radiator hose below (without heating). Suitable for Renault 4CV, Dauphine +

Floride.

4CV/Dauphine/Floride, needle bearing 21mm (by set, per side), mounts in the rear axle. Suitable for

Renault 4CV, Dauphine + Floride.

4CV/Dauphine/Floride, oil filler-cap red, for valve cap from aluminum. Color: red. Suitable for

Renault 4CV, Dauphine + Floride.

4CV/Dauphine/Floride, wheel brake cylinder at the rear left. Suitable for Renault 4CV, starting

from year of construction 02/1956. Renault Dauphine + Floride. Piston diameter: 20.6 mm. Mounting board bore: 32 mm. Brake line connector = 3/8x24UNF. Length over everything: 60 mm. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

4CV/Dauphine/Floride, wheel brake cylinder rear on the right. Suitable for Renault 4CV, Dauphine +

Floride. Piston diameter: 20.6 mm. Mounting board bore: 32 mm. Brake line connector: 3/8x24UNF. Length over everything: 60 mm. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

4CV/Dauphine/Floride, wheel brake cylinder in front on the left. Suitable for Renault 4CV, starting

from year of construction 03/1956. Renault Dauphine + Floride. Panhard. Piston diameter: 28.57 mm. Mounting board bore: 36 mm. Brake line connector: 3/8 x 24 UNF. Length over everything: 71 mm.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

4CV/Dauphine/Floride, wheel brake cylinder in front on the right. Suitable for Renault 4CV

starting from year of construction 03/1956. Renault Dauphine, Floride + Panhard. Piston diameter: 28.57 mm. Mounting board bore: 36 mm. Brake line connector: 3/8 x 24 UNF. Length over everything: 71 mm.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

4CV/Dauphine/Floride, return spring for throttle control (mounted between carburettor and exhaust)

Suitable for Renault 4CV, Dauphine, Floride.

4CV/Dauphine/Floride, bonded-rubber bushing for the kingpin. Suitable for Renault 4CV, Dauphine

Floride, Caravelle, Juvaquatre. Peugeot 201, 302, 402. Citroen C4, C6, Rosalie. Dimension: 12 x 26 x 36 x 32mm. Per piece. Or. No. 8535735

4CV/Dauphine/Floride, bonded-rubber bushing for the wishbone. Suitable for Renault 4CV, Dauphine

Floride. Dimension: circa 16 x 36 x 38 x 35mm. Per piece. Or. No. 8535734

4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm

Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.

4CV/Dauphine/Floride, valve cover gasket for valve cap from aluminum. Suitable for Renault 4CV

Dauphine + Floride.

4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter

132mm. Inside diameter: 24mm. Original from Ferrozell!

4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm

Outside diameter: 53,5mm. Wide one: 19mm.

4CV/Dauphine/R4, headlamp round, glass curved outward. Diameter 145mm. Suitable for Renault

Dauphine, 4CV, R4. Panhard. Bulb socket: Double-filament bulb. With "E" mark!

• Suitable for this article
• 
  Double filament bulb 45/40W, 12V.
  2,93 €
• 
  H4 bulb with two-filament base, 12V,
  7,83 €
• 
  Two-filament bulb 40/45watt, 6 volt!
  4,91 €
• 
  Two-filament bulb 40/45 W, 12 Volt, yellow ! Not allowed in German traffic
  9,38 €
• 
  Bulb 6V, double-filament bulb, base P45T, 40/45 Watt, in dark yellow!!
  8,83 €

4CV/Dauphine/R8, rubber stop front axle (new version) down. Suitable for Renault 4CV, Dauphine, R8

Or. No. 8300011

4CV/Dauphine/R8/Alpine 110, master brake cylinder. Brake system: Bendix (drum brake front). Piston

diameter: 22,2mm. Suitable for Renault 4CV, starting from year of construction 1955. Dauphine Ondine + Floride, with drum brake front. Made in Spain.

• Suitable for this article
• 
  R4/rear engine, brake fluid reservoir with locking cap. Suitable for many
  16,30 €

4CV/Dauphine/R8/R10, brake hose rear. Suitable for Renault 4CV, Dauphine, R8 + R10. Length: 230mm

Thread: 1x female thread 3/8 x 24UNf. 1x male thread 3/8 x 24UNF. Made in Spain.

4CV/Floride, brake hose rear (overall length 183mm). Suitable for Renault 4CV, starting from year

of construction 10/1950 to 1953. Renault Floride (R1100, R1104). Made in Spain.

4CV/Fregate, bonded-rubber bushing for the lever arm shock absorber, in the connecting rod

(coupling rod). Suitable for Renault 4CV + Renault Fregate. Dimensions: 9 x 21 x 21 x 17mm. Or. No. 8 511 922

Fuel tank draw in connecting pieces. Suitable for Renault R4 (1 series) + Renault 4CV.

R4/4CV, piston ring set (engine 680). Suitable for Renault R4, of year of construction 1963 to

1967. Renault 4CV, Dauphine. Bore: 54,5mm. Heavy one: 2,0mm + 2,0mm + 3,5mm. Set for 4 pistons.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 2,0mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 3,5mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

A 110, piston for brake caliper rear. Brake system Bendix. Diameter: 45mm. Overall height: 46mm

Suitable for Renault alpine A110 1600S, A110B, A310.

A 110, auxiliary headlight chrome ring (Jod headlamp). Suitable for Alpine A110. Per piece

Diameter in front: 150,4mm. Diameter rear: 160mm. Deep chrome ring: 39,5mm.

A 310, Piston for brake caliper, front + rear. Brake system Bendix. Diameter: 54mm. Total height

47mm. Tread height: 39mm. Piston groove: 2mm. Piston collar: 6mm. Suitable for Renault Alpine A310 V6.

Alpine A110, exhaust, from high-grade steel. Suitable for Renault Alpine A110.

A110, letter set "ALPINE". Suitable for Renault Alpine A110. Completely made of metal. Amount: 21mm.

A110, emblem "A" (2 pieces). Suitable for Renault Alpine A110. Completely made from metal. Wide

one: 56mm. Amount: 16mm

A110, emblem signature "1100". Suitable for Renault Alpine A110, type 1100VA or 1100VB. Completely

made of metal. Length: 55mm. Amount: 28mm. Or. No. 60.00.000.37 2

A110, emblem signature (2 fittings), "RENAULT + ALPINE". Suitable for Renault Alpine A110

Completely made of metal. Wide one: 85mm + 65mm. Amount: 27mm. Fastening with threaded pins! No further mounting material required.

Alpine A110, piston + liner (4 item). Suitable for Alpine A110. Engine capacity: 1596cc. Bore

77,8mm. Piston pin: 21 x 66,50mm. Piston rings: 1,75 +2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1289cc).

A110, hinges (1 pair) for the luggage compartment hood. Suitable for Renault Alpine A110.